REPAIR TO COMMON TOILET BLOCKS IN ORDNANCE ESTATE AT AFK UNDER SWACHH BHARAT ABHIYAN

Amount

Dismantling of floor hearth or wall tilling cement motar bedding ( but not backing ) remove serviceable tiles to store and rubbish off the premises

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level).

Excavation in trenches n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc . exe or for manholes etc n. exc 10 sqm on plan and n. exe 1.5m depth and getting out in :- Hard/ Dense soil.

M&L for providing cement concrete type I (M-15) 1:2:4 mix (20mm graded aggregate) in foundations, filling and mass concrete fair finished.with necessary centering

M&L for screed bed or bedding layer of mortar 20mm thick for laying floor finishes in CM 1:4

M/L for Non skid coloured ceramic Tiles 7 to 8mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match

Taking down cement or cement lime plaster on brick or stone walls etc including raking out joints, hacking for kay, scrubbing down with water etc.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including finishing the plastered rough finished

M/L for Glazed Ceramic Tiles size 30cm x 20cm x 7-8mm thick on walls (dado)set jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for rendering 15mm thick on fair faces of brick or concrete surfaces of walls in CM 1:4 including finishing the plastered surface even and smooth without using extra cement.

S&f Vitreous china squatting pan 'Orissa pattern, size 580 x 440 mm white, with integral foot rest (excluding flushing cistern and flush pipe) fixed in trap etc complete

Supplying and fixing Vitreous China wash down water closet (pedestal pattern) in repair, white (exluding fixing ), flushing cistern and flush pipe) etc complete.

Supplying & fixing seat and cover for pedestal pan. Closed pattern with flat bottom etc complete.

Supplying & fixing PVC valveless, syphonic action type, flushing cistern low level, white, with inlet ball valve, float and handle including bracket & Flush pipe of polyethylene or PVC 32mm dia connection to pipe and fixing lever if any for 10 liter capacity

S&F 15mm Stop Valves/Gate ( ISI Mark) fancy type chromium plated , cast copper alloy , screw down , high pressure with crutch or butter fly handle screwed both ends for iron pipe and fixed

Supplying and fixing viterous china wash hand basin flat back size 630mm x450mm exculding taps, waste chain and plug and porocelain stopper but including brackets and

Supplying & fixing waste fittings brass chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed loose of pipe 32mm.

S &F PVC connection 15mm size with PTMT nuts of length 450mm

S &F Swivel shower of PTMT any colour for fixing with 15mm pipe ( Minium weight 40gms)

S &F Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screw and wooden / plastic cleats (Minimum weight 190gms)

S &F Liquid soap container of PTMT fixed with and including Chromium plated brass screw and wooden / plastic cleats ( Minium weifht 105gm)

S &F Grating doom 100mm dia of PTMT ( Minium weight 25gms)

S&F Bib taps cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipes or brass ferrule and fixed, bore dia of pipe 15mm.

S&F Pillar taps cast copper alloy chromium plated screwed down high pr. with or without lettered 'hot' & 'cold' with long screw shank and fly nuts, screwed for pipe and fixed in repair, bore dia of pipe 15mm.

S&F Rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as per EIC instruction , Make / Manufacture of tank Sintex / Plasto/ Sheetal of Capacity of tank 1000 lts.

Cutting holes into or through brick walls built in cement mortar and making good in cement mortar or cement concrete 1:2:4 Type B-1 as required for superficial area of hole n exceeding 150 sq cm

S&F PVC ( SWR) P trap bore in 110/110mm

S&F PVC (SWR) WC connector bore of pipe 110mm.

S&F 25mm Stop Valves/Gate ( ISI Mark) , cast copper alloy , screw down , high pressure with crutch or butter fly handle screwed both ends for iron pipe and fixed

S&F 40mm Stop Valves/Gate ( ISI Mark) , cast copper alloy , screw down , high pressure with crutch or butter fly handle screwed both ends for iron pipe and fixed

S&F Mild steel of grade Fe-410-S for framed work as in doors or gates & making of M S Stand of angle or other section with gusset plates, rails, braces etc, complete, drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and fixing complete with necessary MS Sheet

S&F low density polyethylene (LDPE) pipes or pressure rating 6 kgs/sq.cm fixed complete to walls, ceiling or in floors etc. for waste pipes bore of tube 32mm

Supplying & Fixing PVC floor trap with grating including jointing to waste pipe with solvent cement diameter of outlet = 75mm.

S&F Vitreous China bowl Urinal flat back , size 465x355x265mm white ( minium ) with grating and union for discharge pipe ( excluding flushing cistern flush pipe and wastew pipe)

S & F of GI tube / pipe 15mm dia ISI mark medium grade galvanised with all fittings and fixed complete to walls and ceiling or in floor or any position at any height as per direction of E-in-C

S & F of GI tube / pipe 20mm dia ISI mark medium grade galvanised with all fittings and fixed complete to walls and ceiling or in floor or any position at any height as per direction of E-in-C

S&F 20mm Stop Valves/Gate ( ISI Mark) , cast copper alloy , screw down , high pressure with crutch or butter fly handle screwed both ends for iron pipe and fixed

S & F of GI tube / pipe 25mm dia ISI mark medium grade galvanised with all fittings and fixed complete to walls and ceiling or in floor or any position at any height as per direction of E-in-C

S & F 20mm Ball valves high pressure of PTMT with epoxy coated aluminum rod & high density plastic ball screwed for iron pipe and fixed ( min wt 20mm-210gm)

Disconnecting existing tank, setting aside or lowering if required) for repair , cleaning etc and hoisting , reconnecting and refixing in position of capacity exc 250 lit & n exc 500 lit

S & F of GI tube / pipe 40mm dia ISI mark medium grade galvanised with all fittings and fixed complete to walls and ceiling or in floor or any position at any height as per direction of E-in-C

Taking down existing shutters of any description exc 1 sqm and n exc 2 sqm each and removing the same of CW section store.

S&F Solid PVC door Frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S squre tube as per specification

S&F Factory made Solid PVC Moulded door, shutter 28 to 30mm thick (stile ) with 2,4or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, suplying and fixing in frame as per specifiation without wood free EPS

S&F for mild steel butt hinges, medium weight, cold rolled. Size of hinges 75mm.

S&F for mild steel pressed handles, oval type, stove enamelled black. Size of handle 100mm.

S&F mild steel barrel tower bolts stove eamelled black, with bright bolt, length of bolt 100mm.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including quoins, arches, pillars etc but excluding ashlar dressed stonework and precast concrete article.

Demolition of cement concrete (reinforced) of any description and any position not otherwise mention specifically provided for

M&L for preparing plastered or unplastered old surfaces and applying two coats of white washing on walls / ceiling.

M&L for preparing plastered or unplastered new surfaces and applying two coats of cement paint on walls.

Drilling and taping cast iron water mains (In position) for branch connection of the internal dia 20mm & more

Cutting & screwing existing steel tubing ( dia of pipe 20mm) for alteration or addition ( or for lenthning screw on pipe to from conector

Taking up or down steel tubing and connection, including for refixing or removal to store bore of dia 15mm

M&L for preparation of new or previously untreated steel or iron surfaces of any description, not otherwise mentioned over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer.

S & F Health Faucet (ABS body)mild steel Chromium Plated suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook including making connection & fixed in position complete all respect as specified

M&L for providing WPT by using membrane over roof &vertical surface consisting of apling oil bonded bituminous primer coat at 0.30kg/m2 on a clean and dry surface& than providimg a layer ofAPP modified membrane 3mm thick weighing approx .4kg/m2 with non woven polyster reinforcement with very thin poluthylene film on both side with thermofusion process by gas regulated torch & finally applying one coat of super silver sheld aluminium based bituminous paint all as per specification & as directed by E-in-C Make Tiki, IWL & Sika

Excavating in trenches in foul position, n. exe 1.5m wide and n. exe 1.5 in depth; for foundation etc.n. exc 10 sqm on plan and n. exe 1.5m depth and getting out in :- Hard/ Dense soil.( For any type of earth layer) in foul position

Demolition and breaking up drain 150mm pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar.(work in foul position)

Concrete bed to drain pipes 150mm including forming cradles in Cement concrete 1:3:6 type C-2. (work in foul position)

M&L for Reinforced concrete drain pipe (for sewer and drains) of class NP2 laid and jointed complete with collors, including testing drains as specified by filling the pipes with waater to a head of 1.5m at the highest point including tempararily fixing of bends, etc as required. Bore of pipe 150 mm (work in foul position)

Cutting into existing manholes for connecting new drains, making good to pipe and rendering , cutting out existing benching for and forming branch channel (1/2 round or 3/4 section ) in foul position cement concrete 1:2:4 type B-I smooth finished and reforming benching as required internal of dia of pipe 150mm dia & over in foul position

Site Clearence soft/loose soil

M&L Pre-cast cement concrete block masonary Type C 1:3:6 20mm graded aggregate solid Block exc 10cm in width and setting in motar complete cement motar 1:4

M&L for Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) set in cement mortor 1:4 for landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

M&L for deformed or twisted bars 6 to 8mm Dai, cut to length bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips.

Removing surplus excavted and demolished material up to distance 1.5 Km and depositing where soil,PCC

Returning, filling in, including spreading levelling, watering and well ramming in layers not exc 25cm. In hard / dence soil (work in foul position)

M/S Hrushikesh A. Patil