Construction of Compound wall at Muslim Burial ground at Eskadonka road end in Division no. 52 in Nellore Municipal Corporation.

Dismantling of Existing Brick Masonry and stacking the useful material for reuse including incidental and operational charges etc. complete

Boring for Cast-in-Situ piles Augering and boring of holes in site for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils without under reams as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of following diameters.(Pile foundation): 300MM Dia

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH

Conveyance of un-useful excavated earth to a distance of 2km for disposal including hire charges of T&P, labour charges etc, complete for finished item of work

Filling with sand in the bottom layers not exceeding 15 cm thick, consolidating each deposited layer by ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) excluding seigniorage charges

Plain Cement Concrete (1:4:8) for under bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work. (APSS No. 402)

Laying of R.C.C grade M25 design mix using Concrete mixer using 20 mm Graded Metal (MORD) including cost and conveyance and watering mixing curing and labour charges etc., complete as per S.S. For Piles

Supplying, fixing and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded (Fe 415 )

Brick Masonry in CM (1:5) with Bricks traditional size 23 x 11 x 7 cms 2nd class including cost and conveyance of all materials to site of work and curing etc., complete.

Plastering with CM 2 coats, 20 mm thick, base coat in CM (1:4), 16 mm thick and top coat in CM (1:3), 4 mm thick with Dubara Sponze finishing

Painting wall with 2coat of Emulsion paint of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials labour charges and incidental such as scaffolding lift charges etc., complete for finished item of work . ( External )

Providing M.S grill windows with specifiec design authorisied by the department including cost and conveyance of all materials and labour for fixing, cutting, placing and welding at workshop and including transportation charges etc. complete for finished item of work.

Painting to the new iron work with synthetic enamel paint 2coats of standard make, with red oxide and shade approved by the department authorities including cost and conveyance of all materials, scaffolding, hire charges of brushes and including cost of all labour charges etc. complete as per SS

Supply, delivery and fixing of Cast Iron Arrows 150mm height over compound wall grills, including cost and conveyance of Arrows, Cost of Arc welding charges for arrows fixing over compound wall grills including cost and conveyance of all materials and all labour charges etc.,

Supply, delivery and fixing of Ornamental Iron Moulded Flowers IN compound wall grills, including cost and conveyance of Ornamental Iron Moulded Flowers, Cost of Arc welding charges for Ornamental Iron Moulded Flowers fixing over compound wall grills including cost and conveyance of all materials and all labour charges etc.,

Precast Ornamental minar with 2ft x 2ft dia including cost of cement,Sand ,steel,grit, binding wire ,6' pvc pipe,loading,unloading,bamboo scaffolding,lighting,wiring,transportation and labour charges etc complete

Construction of Arch shaped structure (front and back side )with design complete as per site conditions except concreting and reinforcement but including labour and transoportation charges etc complete

Precast Ornamental minar with 2ft x 2ft dia including cost of cement,Sand ,steel,grit, binding wire ,6' pvc pipe,loading,unloading,bamboo scaffolding,lighting,wiring,transportation and labour charges etc complete

Repairs to Watch Man Room :: Painting wall with 2coat of Emulsion paint of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials labour charges and incidental such as scaffolding lift charges etc., complete for finished item of work

Painting wall with 2coat of Emulsion paint of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials labour charges and incidental such as scaffolding lift charges etc., complete for finished item of work External

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3) 20mm thick fwith 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials to site of work, all incidental and operational charges and all labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab, curing and seigniorage etc. complete.

Supply and fixing of Doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick double shutters with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked MS powder coated fixtures of 6 Nos. butt hinges (IS:205) 150mm long, 1 No. aldrop (IS:2681) 300mm long, 2 Nos. tower bolts (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 2 Nos. door stoppers and 2 Nos. rubber bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1200mm x 2600mm)

Supply and fixing Aluminium Anodised Casement windows as per approved drawing with aluminium anodised sections of Series C Jindal Hollow sections and outer frame of 8804 of size 46 x 44 mm, Shutter frame of 8802 of size 44 mm x 46 mm and Mullion frame of 8803 of size 59 x 38 and glazing section of 4433 with plain clear float glass 6 mm thick fixed including supply and fixing aluminium powder coated 1 No.of casement friction stay hinges for each shutter, 1 Nos. aluminium handles of 150 mm for each shutter and all labour charges for fixing the fixtures with required no.of screws, bolts and nuts and including labour charges for fixing the frame in position, fixing shutter to frame etc. completed for finished item of work