Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.9 LAccepted-AOC | L1 | Accepted-AOC BEING LOWEST BIDDER | |
| 2 | L2₹20.0 L+₹1.1 L (5.69%)Rejected-Finance | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | L3₹20.5 L+₹1.6 L (8.30%)Rejected-Finance 255 VILLAGE UGRA POST OFFICE BARA AMBALA HARAYANA PIN 134003 | AMBALA | AMBALA | HARYANA | 134003 | L3 | Rejected-Finance Other than lowest bidder | |
| 4 | L4₹21.2 L+₹2.3 L (12.3%)Rejected-Finance 1016 HOUSING BOARD COLONY AMBALA CANTT HARYANA 133001 | AMBALA CANTT | AMBALA | HARYANA | 133001 | L4 | Rejected-Finance Other than lowest bidder | |
| 5 | L5₹21.7 L+₹2.8 L (15.0%)Rejected-Finance 1170 BENGALI MOHALLA NEAR PRABHAKAR HOSPITAL AMBALA CANTT 133001 | AMBALA | HARYANA | 133001 | L5 | Rejected-Finance Other than lowest bidder |
| Sl No | Description | Qty | Unit | u and v engineers and consultants L3 | M/s Guddu Builders L2 | ANIL CONSTRUCTION CO. L7 | R. P. Suppliers and Construction Co. L6 | The Rahul Vig L5 | RAJINDER KUMAR AND ASSOCIATES L1 | B&R Contruction & Services L4 |
|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Material & Labour for complete removal of existing treatment internal as well as external or ceiling and soffits of Over Head Tank and installation of GE utility by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed. | 900 | Square Metre | 40 ₹36,000 | 10 ₹9,000 Lowest | 45 ₹40,500 | 60 ₹54,000 | 50 ₹45,000 | 28 ₹25,200 | 30 ₹27,000 |
| 2.00 | Material & Labour for applying one coat of white cement based putty on old as well as new plastered surface of Over head tank and installation of GE utility including sand papering the puttied surfaces to form an even and smooth surface complete all as specified and directed. | 1,180 | Square Metre | 85 ₹1,00,300 | 30 ₹35,400 Lowest | 60 ₹70,800 | 40 ₹47,200 | 35 ₹41,300 | 35 ₹41,300 | 35 ₹41,300 |
| 3.00 | Material & Labour for preparation of puttied surfaces and applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over new or untreated old plastered/ unplastered surfaces of Over head tank and installation of GE utility to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. | 1,080 | Square Metre | 100 ₹1,08,000 | 118 ₹1,27,440 | 135 ₹1,45,800 | 75 ₹81,000 | 60 ₹64,800 Lowest | 80 ₹86,400 | 150 ₹1,62,000 |
| 4.00 | Material & Labour for applying two coats of oil bound distemper over a coat of alkali resistant primer over new or untreated old plastered surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper/ primer should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed. | 100 | Square Metre | 200 ₹20,000 | 40 ₹4,000 Lowest | 80 ₹8,000 | 50 ₹5,000 | 40 ₹4,000 Lowest | 50 ₹5,000 | 150 ₹15,000 |
| 5.00 | Material & Labour for applying one coat of weather proof exterior emulsion paint over and including priming coat of exterior primer over new rough plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. | 250 | Square Metre | 250 ₹62,500 | 82 ₹20,500 | 90 ₹22,500 | 50 ₹12,500 | 40 ₹10,000 Lowest | 70 ₹17,500 | 120 ₹30,000 |
| 6.00 | Material & Labour for applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over old existing rough plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed. | 120 | Square Metre | 300 ₹36,000 | 110 ₹13,200 | 105 ₹12,600 | 80 ₹9,600 | 72 ₹8,640 | 70 ₹8,400 Lowest | 100 ₹12,000 |
| 6.01Note for Periodical services:- MOBILISATION OF T&P AND MATERIAL: The Contractor shall complete the following activities within 20 days from the date of commencement of work: (a) Submission of Memorandum of Understanding (MOU) with any of paint manufacturer (b) Obtaining approval of paints & authorized applicator of paints manufacturer from GE (c) Procurement of T&P required for mechanical mode of painting (d) 30% of the quantity of Paints, Primer & Putty required (as per respective manufacturer’s average coverage area) for various items of painting catered in CA COMPENSATION FOR DELAY IN MOBILISATION OF T&P AND MATERIAL BEYOND 30 DAYS: In case of failure on the part of contractor to complete above mobilization within the stipulated period, compensation shall be recovered from the contractor at the rate of Rs. 1,000/- (Rupees one thousand only) per day subject to a maximum of Rs. 1,00,000/- (Rupees one lakh only). Condition 50 of IAFW-2249 (General Conditions of Contracts) shall be deemed amended accordingly. The contractor shall submit original Tax invoices & e-way bills for the entire quantity of materials so procured. The material and T&P collected shall be entered in the MB as “NOT TO BE ABSTRACTED” and shall be duly signed by both the parties. | ||||||||||
| 7.00 | Material & Labour for 18-20 mm thick black granite stone slab of any type with table rubbed and polished , set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed. | 15 | Square Metre | 1,000 ₹15,000 Lowest | 2,300 ₹34,500 | 2,500 ₹37,500 | 2,500 ₹37,500 | 2,200 ₹33,000 | 1,950 ₹29,250 | 2,000 ₹30,000 |
| 8.00 | Demolition of Unreinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed | 43.5 | Cubic Metre | 120 ₹5,220 | 70 ₹3,045 | 90 ₹3,915 | 100 ₹4,350 | 100 ₹4,350 | 60 ₹2,610 | 10 ₹435 Lowest |
| 9.00 | Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed. | 36 | Cubic Metre | 1,500 ₹54,000 | 1,200 ₹43,200 | 950 ₹34,200 | 1,200 ₹43,200 | 1,100 ₹39,600 | 780 ₹28,080 | 600 ₹21,600 Lowest |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
27 Dec 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE UTILITY AMBALA
GE UTILITY AMBALA CANTT 133001
REPAIR MAINT OF B/R NATURE FOR SUB STN AND EM INSTALLATIONS OF EM I SUB DIV UNDER GE UTILITY AMBALA
2025_MES_743237_1
CA NO GE U AMB 71 OF 2025-26
Open Tender
Civil Works
Item Rate
240 days
GE UTILITY AMBALA CANTT
AS PER TENDER DOCUMENTS
8 documents required · 8 mandatory
₹500
GE UTILITY AMBALA CANTT
₹52,000
4 Feb 2026
5 Dec 2025
29 Dec 2025
5 Dec 2025
27 Dec 2025
20 Dec 2025
5 Dec 2025 - 12 Dec 2025
Amount
Material & Labour for complete removal of existing treatment internal as well as external or ceiling and soffits of Over Head Tank and installation of GE utility by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as specified and directed.
Material & Labour for applying one coat of white cement based putty on old as well as new plastered surface of Over head tank and installation of GE utility including sand papering the puttied surfaces to form an even and smooth surface complete all as specified and directed.
Material & Labour for preparation of puttied surfaces and applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over new or untreated old plastered/ unplastered surfaces of Over head tank and installation of GE utility to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
Material & Labour for applying two coats of oil bound distemper over a coat of alkali resistant primer over new or untreated old plastered surface using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper/ primer should be able to spray in hard to reach areas and penetration of distemper on the surface complete all as specified and directed.
Material & Labour for applying one coat of weather proof exterior emulsion paint over and including priming coat of exterior primer over new rough plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
Material & Labour for applying two coats of weather proof exterior emulsion paint over and including priming coat of exterior primer over old existing rough plastered surfaces to be applied with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.
Note for Periodical services:- MOBILISATION OF T&P AND MATERIAL: The Contractor shall complete the following activities within 20 days from the date of commencement of work: (a) Submission of Memorandum of Understanding (MOU) with any of paint manufacturer (b) Obtaining approval of paints & authorized applicator of paints manufacturer from GE (c) Procurement of T&P required for mechanical mode of painting (d) 30% of the quantity of Paints, Primer & Putty required (as per respective manufacturer’s average coverage area) for various items of painting catered in CA COMPENSATION FOR DELAY IN MOBILISATION OF T&P AND MATERIAL BEYOND 30 DAYS: In case of failure on the part of contractor to complete above mobilization within the stipulated period, compensation shall be recovered from the contractor at the rate of Rs. 1,000/- (Rupees one thousand only) per day subject to a maximum of Rs. 1,00,000/- (Rupees one lakh only). Condition 50 of IAFW-2249 (General Conditions of Contracts) shall be deemed amended accordingly. The contractor shall submit original Tax invoices & e-way bills for the entire quantity of materials so procured. The material and T&P collected shall be entered in the MB as “NOT TO BE ABSTRACTED” and shall be duly signed by both the parties.
Material & Labour for 18-20 mm thick black granite stone slab of any type with table rubbed and polished , set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed.
Demolition of Unreinforced Cement Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed
Hardcore of gauge n exc 63mm, deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface complete all as specified and directed.
Material & Labour 75 mm thick PCC 1:4:8 Type D–2 using 40mm graded crushed stone aggregate as in sub base of floor/ hard standing etc and finished even and fair without using extra cement complete all as specified and directed.
Material & Labour for 60mm thick (M-35 grade concrete) machine pressed precast concrete interlocking paver block of approved design and shape confirming to IS 15658-2006 with a cushioning strength not less than 250 kg/sqmm with grey cement and pigmentlaid over 25mm thick sand cushning complete all as specified and directed. Note :- Sand cushioning will be measured and paid seperately.
Material & Labour for sand cushioning layer of 25mm thick under interlocking tiles complete all as specified and directed.
Material & Labour for Providing cement concrete in edges Type B1 1:2:4 using 20 mm Graded Aggregate in roof kerbs or mud stops rounded or chamfered on edges complete all as specified and directed.
Taking down cement plaster and raking out joints, hacking for key, scrubbing down with water built in cement mortar complete all as specified and directed.
Material & Labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortor 1:4 finished even and fair without using extra cement complete all as specified and directed. Note:- Plaster shall be done using yamuna sand/ black sand.
Material & Labour for 10 mm thick rendering on other than fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. Note:- Plaster shall be done using yamuna sand/ black sand.
Material & Labour for rough cast plaster with and including 15 mm thick rendering in cement mortor 1:3 on brick wall or concrete surfaces as specified in clause 14.22 of SSR Part -I complete all as specified and directed.
Demolition or dismantling of loose brick work built in cement mortar of any description etc complete all as specified and directed.
Material and labour for brick work in small patches over boundary wall with sub class `B` brick old size in CM 1:4 straight or curved on plan exc 6m mean radious complete all as specified and directed.
Material and labour using old brick work retrived from Ser item No 18.00 with sub class `B` brick old size in CM 1:4 straight or curved on plan exc 6m mean radious complete all as specified and directed.
Supply & Fix in repair Hacking out old broken glass (any thicknesss, size,quality or description) and supply & fix 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exc 0.5 sq.m in each pane complete all as specified and directed.
Supply and fixing of mild steel framed work as in ornamental gates or other section with gusset plates,rails, braces, grills, pintal etc. complete drilled for fixing steel sheeting or other covering to be prepare for hanging including either hooks or hinges etc. and half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts and for shed rolled angle section use as a truss and for cattel trap including cutting tops to shape as directed, drilling holes, notching for wire, etc conforming to Fe-290 (Gde E-165), and incl dismantling of old unsv gates /door complete all as specified and directed.
Material & Labour for providing PCC 1:2:4 type b1 (20mm graded stone aggregate) as in coping benching and bed block etc including necessary form work complete all as specified and directed.
Supply and fixing for prepainted galvalume aluminum zinc coating GI based fully corrugated profile tile pattern steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, vally gutter etc fixed with self tapping screws or using J hook where as required complete all as specified and directed.
Supply and fixing for prepainted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, valley gutter etc fixed with self tapping screws or using J hook where as required complete all as specified and directed.
Supply and fixing for prepainted galvalume aluminum zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridge, valley gutter etc fixed with self tapping screws complete all as specified and directed.
Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
Material & Labour for re-securing/ adjusting existing false ceiling grid, any type and make are required tightening to remove sag portion/ depression in false ceiling grid including replacement of missing sections / part/ suspenders as per existing size etc complete all as specified and directed.
Dismantling of wall lining, ceiling board or insulation boards, any thickness, including cover fillets complete all as specified and directed.
Providing & fixing false ceiling at any heights with GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of perforated Size 595 x 595 mm of approved texture, 12mm Semi With perforated thick micro tegular design and patterns having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and L shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 tiles fully mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in Charge complete all as specified and directed. Make of GRG Ceiling Board : Diamond / Armstrong / BSR Calsi
Material & Labour for Metal false ceiling consisting of 600mmX600mm, 5mm(+ 0.25) thick embossed false ceiling sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified company, used as panel insert in a frame work made using anodised aluminium T-section of sizes 1" x1" (25mmX25mm,1mm thick) in square pattern of grid sizes of 2'X2'(600mmX600mm). The aluminium framework is supported from the ceiling with the help of 'J' hook and G.I. wire / 4mm MS rods at every 1meter interval of required sizes to maintain proper level etc. The aluminium frame work is supported on the side wall with the use of aliminium L- Section of size 1"X1" (25mmX25mm, 1mm thick) angles etc complete as per direction of Engineer-In- Charge, Manufacturer, specification and drawing.
Supply & Fix of 5-8 mm thick colour PVC panel, hollow profile PVC wall paneling/ lining inclusive of fixing arrangement including screws, side beading, angle, U- channel fixing on wall complete all as specified and directed.
Supply & Fix 5 mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on wall to make PVC Frame as per specification and drawing complete all as specified and directed.
Supply & Fix of Mild steel work as in posts & struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or reveting, etc., & similar work conforming to Fe 290 or E-165 including dismantling of existing pole complete all as specified and directed. Note :- Work Executed over existing boundary wall necessary fastners if required including in quoted rate.
Supply & Fix concertina coil 600 mm dia (approx 50 turns per coil) in stretch position hot dip galvanised steel wire coated with CLR anti corrosive paint making diamond shape with the help of dove tail clip 18 SWG fixed over barbed wire barbed wire with angle iron, the concertina coil is to be fixed with the barbed wire at point wherever coil touch the bottom of barbed wire with the help of hog rings 14SWG complete all as specified and directed. Note:- Hoggong shall be fixed at a interval of 600mm C/C wherever it touched with barbed wire shall be 300mm it shall be deemed to included in quoted rate.
Supply & Fix galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. and taking down of existing complete all as specified and directed.
Material & Labour 18-20 mm thick Machinie cut Kota stone slab in flooring on treads, landing laid over including 20mm thick screed bed 1:4 jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.
Material & Labour for two coats of white wash on the walls , pillars, cornices of old decorated brick/concrete, plastered or unplastered surfaces of walls, etc complete all as specified and directed.
Material & Labour for dressing of ground by cutting / removing vegetation, scrapping, clearing of all grass, shrubs, bushes, weeds, trees and saplings not exceeding 30cm in girth (measured at a height of 1m above the ground level) on either side of building or low laying area, aprons and other places in alpha power house area by deploying jungle jims (06 feet) with tractors, and level the ground as per natural ground slope operators including fuel, lubricant, etc. complete all as specified and as directed. Note:- Work executed at Alpha Power house
Cleaning removing all scale and dirt, boulders, grass, vegetation of any size etc, from drain and from mouths of circulating pipes, etc incl removing of the same upto 50m and spreading or level with the exesiting ground complete all as specified and directed. Note:- Work executed at Alpha Power house
Material & Labour for removing existing 60/80 mm thick coloured precast concrete interlocking paver block of any shape including demolition of PCC and relaying of the same with cement concrete 1:2:4 type B1 using 20mm graded mechanically crushed stone aggregate 75mm thick and rubber moulded M-35 grade paver block retrived from dismantling with grey cement and pigment to match, over and including 25 mm thick sand cushion complete all as specified and directed.
Uprooting scrubs/plant/flora & fauna on wall girth not exceeding 100mm from brick wall by cutting holes into masonry/walls for digging out roots and dosing Sulfuric/Phenolic Acid as per manufacturer's instruction to burn deep rooted tree roots and making good the disturbed area with cement mortar in CM 1:3 using water proofing compound including necessary scaffolding upto a height of 20 metre complete all as specified and directed. Note :- (i) scaffolding incl quoted rate. (ii) Brickwork and plaster shall be paid separetely. (iii) Removal of any type of tree on walls and on roof including peepal tree is inclusive in quoted rate. (iv) Work executed at refrigeration building.
Note:- Amount of credit of Rs. 96200.00 for retrieved materials is mentioned in Schedule of Credit of tender documents in pdf form which will be deducted offline while acceptance of tender.
M/s Guddu Builders (BID ID -3514719)
u and v engineers and consultants (BID ID -3509493)
B&R Contruction & Services (BID ID -3509776)
The Rahul Vig (BID ID -3515347)
R. P. Suppliers and Construction Co. (BID ID -3515054)
ANIL CONSTRUCTION CO. (BID ID -3514947)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.63 MB
Tender.pdf
Tender Documents • 0.63 MB
BOQ_832252.xls
BOQ • 0.54 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .