PROVIDING, LAYING, BM 50 MM, BC 30 MM THICK (HMP MIX), APPLYING TACK COAT, ROAD MARKING, ROAD STUD, ROAD DELINEATOR AND BERM FILLING ALL AS PER MORTH SPECIFICATIONS BETWEEN KM 0.000 TO 7.020 ON ROAD KKG-MESHAI OF 116 RCC UNDER 48 BRTF/PROJECT UDAYAK

Providing, laying and Compaction of 30 mm thick Bituminous concrete as per MoRT&H specifications for road and bridge works mixed with binder asphalt Bitumen as per Job Mix formula min 5.4% by weight of total mix and 2% filler by weight of mix conforming to the required specifications for filler as per Table 500.9 of MoRT&H specifications for road and bridge works (5th revision) and rolled to the required specification complete in all respect all as specified and directed by Engineer-In-Charge between km 0.000 to 7.020 on road KKG-Meshai (net length 6.960 km) under 116 RCC/48 BRTF/Project Udayak in Arunachal Pradesh Stat

Providing and applying Tack Coat using emulsion pressure distributer @2.5 Kg/10 Sqm (RS-1 grade) or using paving bitumen using bitumen pressure distributer on prepared bituminous/ granular surface cleaned with mechanical broom, all complete as per clause 503 of MoRT&H Specification for Road & Bridge (5th Revision) complete in all respect all as specified and directed by Engineer-In-Charge between km 0.000 to 7.020 on road KKG-Meshai (net length 6.960 km) under 116 RCC/48 BRTF/Project Udayak in Arunachal Pradesh State.

Providing, laying and Compaction of 50mm thick BM (Bituminous Macadam) for correction works with pre coated stone chips grading conforming to Table-500-7 and aggregates satisfying the physical requirement of table 500-6 of MoRT&H specifications for road and bridge works (5th revision) mixed with 3.4% bitumen by mass of total mix and rolled/compacted as per MoRT&H specifications (5th Revision) to the required specification complete in all respect all as specified and directed by Engineer-In-Charge between km 0.000 to 7.020 on road KKG-Meshai (net length 6.960 km) under 116 RCC/48 BRTF/Project Udayak in Arunachal Pradesh State.

Providing and applying Road marking with thermoplastic paint (2.5 mm thick) conforming to MORT&H clause 803.4 including preparation of surface complete in all Respect as specified and directed by Engineer -In –Charge between km 0.000 to 7.020 on road KKG-Meshai (net length 6.960 km) under 116 RCC/48 BRTF/Project Udayak in Arunachal Pradesh State.

Providing and fixing of road stud 100x100 mm, diecast in aluminium, resistant to corrosive effect of salt and grit, fitted with lens reflectors, installed in concrete or asphaltic surface by drilling hole 30 mm upto a depth of 60 mm and dedded in a suitable bituminous grout or epoxy mortar, all as per BS:873 (Part4) 1973 as specified in Particular Specifications and notes of Sch ‘A’ and as directed and approved by Engineer-in-Charge between km 0.000 to 7.020 on road KKG-Meshai (net length 6.960 km) under 116 RCC/48 BRTF/Project Udayak in Arunachal Pradesh State.

Providing/Fixing Road Delineators (900 mm)as specified in Particular Specifications and notes of Sch ‘A’ and as directed and approved by Engineer-in-Charge between km 0.000 to 7.020 on road KKG-Meshai (net length 6.960 km) under 116 RCC/48 BRTF/Project Udayak in Arunachal Pradesh State.

Earth work in embankment by filling with earth free from roots etc spreading in layers not exceeding 30 cm including watering and finishing to required slope and level not exceeding 1.5m high above the base in ordinary soil for both side berm of width 0.90 mtr complete in all Respect as specified and directed by Engineer -In –Charge between km 0.000 to 7.020 on road KKG-Meshai (net length 6.960 km) under 116 RCC/48 BRTF/Project Udayak in Arunachal Pradesh State.