Providing Galvalume sheet in cladding with MS angles from Substation-1 to old Gate No.2

Amount

Earthwork in excavation in all types of soil, moorum etc., at depths as specified below in foundations of compound wall etc. up to required levels in both dry and wet conditions including necessary pumping / bailing out of water, slush removal etc., nd including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m to 500 m etc., complete all as directed.

Providing plain cement concrete 1:4:8 nominal mix using 40 mm graded crushed granite aggregate including mixing, depositing in position, tampering, finishing, curing including all materials & labbour etc., complete all as directed.

Providing and laying cement concrete work in nominal mix of 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 20 mm nominal size), excluding the cost of centering, shuttering and including cost of finishing & Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) and all materials & men etc., complete

Demolishing RR work in cement mortar manually or by mechanical means carefully including stacking of serviceable material to be used for constrcution of new RR compound wall and disposal of unserviceable material to a lead of 100M etc., complete all as directed.

Supplying & fixing at site MS Angle iron post of required size 75X75X8mm including bottom to be split and bent at right angle in opposite direction for 10 cm length in vertical supports and placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be welded / strutted on both sides and end post on one side only and provide 50X50X6mm MS angels in horizontals and to be welded to vertical supports etc., including apply of two coats anti corrsive paint over a coat of red oxide primer and all materials and labour etc., complete

Supply and fixing of pre coated, Trapezoidal profiled Galvalume Roofing sheets in cladding work (Size, shape and pitch of corrugation as approved by Engineer-in-charge), 0.50 mm total coated thickness (TCT) Zinc Aluminium alloy coating AZ 150 as per IS:277/ASTM 1379 in 550 Mpa steel grade of approved make Jindal / Tata Blue Scope / Bushan Steel. The sheet shall be fixed using self drilling / self tapping screws @ 500MM c/c along the length of sheet and where ever specified by engineer (Quoted rate shall inclusive of any laps of sheet, etc.,) complete all as directed.

Providing 15 mm thick plaster with CM (1:4) to walls and concrete surfaces etc., where ever specified, including cost of Cement (PPC-Ramco, ACC, Ultratech, Nagarjuna & Jaypee) and all materials, tools, plant and labour, scaffolding arrangements and curing all as per specifications and directions of the engineer.

Design, fabricate, supply and fix in position of M.S gates as per instructions of Engineer Representative including structural steel elements like channel, angels, rods, plates etc., and apply of two coats anti corrsive paint over a coat of red oxide primer. The quoted rate includes all materials, required side hinges, welding consumables, finishing works and sliding channels and required materials for sliding gate etc., complete all as directed.

Providing Two (2) coats of white washing with suryacem / Hitech gold to plastered surface to give even shade etc., complete all as directed.

YASASWANI CONSTRUCTIONS

maple tree projects

RADHA KRISHNA CONSTRUCTIONS

ASPIRE TECHNO ENGINEERS