Supply installation testing and commissioning of different dia bluk flow meter at different locations inside Balangir town.

Dismantling of Cement Concrete Grade M-15 & M- 20 including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 metrer.

Earth work in all kinds of soil within 50m. initial lead & 1.5m. initial lift including rough dressing & breaking clods to maximum 5cm. to 7cm. & laying in layers not exceeding 0.3m. in depth & as per direction of the engineer–in–charge.

Dismantling of C.I. sluice valve including stacking of useful materials within a lead of 50 metres. Upto 150 mm diameter

Above 150 mm diameter

Supply, installation, testing and commissioning of Electromagnetic Flow Meter (EMF) As Per ISO 4064, for Raw/Pure water with accuracy +/- 0.5% of measured value & protection as per given specifications for size 100mm to 1000mm including sensor, transmitter, Surge Protector, cable GI duct if suitable size 25 mm and power supply of Flow meter must be 24V DC. 24V DC SMPS with MCB, Surge Protection device, GSM/ GPRS modem (with Simcard suitable for available telecom network and its charges valid for 36 months) including the pipe cutting, levelling and installation of flow meter in the pipelines with necessary tool tackles, cranes including 36 months guarantee, Flow meter data dashboard must be prepared web based applicable which can be accesable from anywhere over internet etc complete, as may be required at site & based on technical specifications (Make: Krohne Marshall/ ABB/ Siemens/ Adept Fluidyne/ Toshniwal/ Emerson/ E&H/ Yokogawa) i) 100mm dia.

150mm dia.

200mm dia.

250mm dia.

300mm dia

Supplying and laying in trenches HDPE ( PE-100) pipe of the following nominal bore and tube fittings for encasing of cables including Earth work, testing as per specification all complete as p er direction of EIC. 25mm OD (3/4") HDPE pipe ( 6 Kg/Cm2)

Supplying , fixing of 2 pole single phase 16A MCB including cost of socket , Plug point all complete as per direction of EIC.

Fixing Cast Iron Sluice Valve with double flanged ends for water works purposes conforming to IS 14846 - 2000 for the following rating and nominal diameters as per specification complete. 100 mm diameter

150 mm diameter

200 mm diameter

250 mm diameter

300 mm diameter

Providing flanged joints conforming to IS:3114-1994 to flanged Cast Iron pipes and fittings of the following nominal diameters including testing of joints, cost of bolts and nuts and rubber insertions as per specification complete. 100 mm diameter

150 mm diameter

200 mm diameter

250 mm diameter

300 mm diameter

Supplying all materials, labour and T & P etc. and laying of G.I / MS pipes all complete as per the direction of EIC. 100mm dia MS Pipe (4.0 mm thick)

150mm dia MS Pipe (4.50mm thickness) (outer dia 168.30 mm)

200mm dia MS Pipe (6.30mm thickness) (outer dia 219.10 mm)

250mm dia MS Pipe (6.30mm thickness) (outer dia 273 mm)

300mm dia MS Pipe (7.10 mm thickness) (outer dia 323.9 mm)

Cost of MS Flanged :- 10mm thickness MS Flange 100mm dia

10mm thickness MS Flange 150mm dia

12mm thickness MS Flange 200mm dia

12mm thickness MS Flange 250mm dia

16mm thickness MS Flange 300mm dia

Flame cutting and facing of MS plate or pipes upto 8mm thick including supply of all labor, material, tools & plants for following plate thickness all complete as per specification and direction of Engineer-in-Charge.

Providing joints by welding with two welding beads/pass, conforming to IS:816-1998 (Single 60° Butt weld) to MS pipes and fittings at site by using welding generator including testing of joints, as per specification complete.

Supplying all materials, labour and T & P etc. and construction of valve chamber of following sizes with 100 mm thick sand filling in foundation, lean cement concrete (1:3:6) of 150mm thick, well burnt Clamp Burnt brick masonry in cement mortar (1:3) of 250mm thick wall in foundation and plinth, 12mm thick cement plaster (1:3) inside and outside, 100mm thick cover slab in M-20 R.C.C. (1:1½:3) using minimum reinforcement of HYSD bar in cover slab at 100kg. per each Cum. of RCC, 50mm thick cement concrete (1:2:4) in bed and wall top including centring and shuttering, earthwork in all kinds of soil and refilling etc. as per specification and direction of the Engineer-in-charge, including transportation of all materials to site, all complete. Construction of Valve Chamber of size for 3" to 6 "dia pipe (size 0.90 x 0.90 x 1.10)

Construction of Valve Chamber of size for 7" to 10 "dia pipe (1.20x1.20x1.30)

Construction of Valve Chamber of size for 300mm dia pipe (1.60 x 1.20 x 1.50)

Filling in foundation & plinth with sand watered and ramed as per the direction of Engineer in charge.

Removal of surplus earth by mechanical means including cost of all labour ,transportation ,T & P etc all complete.

Cost of Materials:- 100mm dia D.I. resilient seated Gate valve with hand Wheel (P.N.-1.60)

150mm dia D.I. resilient seated Gate valve with hand Wheel (P.N.-1.60)

200mm dia D.I. resilient seated Gate valve with hand Wheel (P.N.-1.60)

250mm dia D.I. resilient seated Gate valve with hand Wheel (P.N.-1.60)

300mm dia D.I. resilient seated Gate valve with hand Wheel (P.N.-1.60)

100mm CI M/J Flange Socket T.P

150mm CI M/J Flange Socket T.P

200mm CI M/J Flange Socket T.P

250mm M/J Flange Socket T.P

300mm M/J Flange Socket T.P

Hireing charges of 5 HP Diesel pump for dewatering of pipeline till empty as per the direction of Engineer in charge.