CONSTRUCTION OF ROOFING AND TOILET AT ICDS CENTRE NO- 77 AT PEYANDA PARA, NATUN SANGHA CLUB IN BOOTH NO 22, WARD NO 01 UNDER APAS WITHIN KRISHNANAGAR MUNICIPALITY. SL NO- 3

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (a) Pakur Variety

Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation

A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply %Cum of sand. (payment to be made on measurement of finished quantity)

Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth

Brick work with 1st class bricks in cement mortar (1:6) (b) In Superstructure in Grounf Floor

125 mm thick brick work with 1st class bricks in cement mortar (a) In foundation and plinth

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor). (f) 25 mm to 30 mm shuttering without staging in foundation.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor/upto4m. (i) Tor steel/Mild Steel II. JSW/ JSPL/ SHYAM/ SRMB/ BMASL/ ELECTROSTEEL/ SSL

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] ii) With 1 : 6 cement mortar. b) 15 mm thick plaster.

ii) With 1 : 6 cement mortar. c) 20 mm thick plaster.

ii) With 1 : 4 cement mortar. b) 10 mm thick plaster.

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. NOTE: Cement 0.152 cu.m per 100 sq.m.

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EICIn Ground floor b) Two coats

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) a) Normal Acrylic Emulsion

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos, of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/5q.m & joint filling using white cement slurry @ 0.20kg/Sq.m (b) Area of each tile above 0.09.Sq.m (1) Coloured decorative

(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement@ 2.91 Kg/Sq.m & joint filling using white cement slurry 0.20kg/Sq.m. 19 (b) Area of each tile above 0.09 Sq.m (1) Coloured decorative

M.S.or W.I. omamental grill of approved design joints continuously welded with M.S., W.L. flat and bars for windows, railing etc fitted and fixed with necessary 20 screws and lugs in ground floor, In Ground Floor (1) Grill weighing above 10 Kg./sq mtr and upto 16 Kg./sq. mtr

b) Extra for work in grill gate. (1) For hanging and locking arrangements including supply of materials and 21 labour complete. 15% extra

(b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. [The extra rate admissible for the openable portion only]

(a) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering 23 etc NOTE Cement 0.152 cum per100 sq.m.

(b) Priming one coat on steel or other metal surface with synthetic oil bound 24 primer of approved quality including smoothening surfaces by sand papering etc

(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: a) On timber or plastered surface. With super gloss (hi-gloss) iv) Two coats (With any shade except white)

(A) Painting with best quality synthetic enamel paint of approved make and trand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary 26 b) On steel or other metal surface With super glosschi-gloss) iv) Two coots with any shade except white).

Supplying fitting and fixing GI pipes of TATA make with all necessary accessories, specials viz socket, bend, tee, union, cross, eibo, nipple longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required jointing materials and two coats of painting with approved paint in any position above ground 27 (Payment will be made on the centre line measurements of total pipe line including al specials. No separate payment will be made for accesories specials. Payment for painting will be made seperately) (A) For Exposed Work (e) (i) 40 mm dia, medium quality

(c) (i) 25 mm dia, medium quality

Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts, nuts etc. (a) With 'P' trap (with vent)

Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm x 75 mm wooden blocks complete. (ii)470 mm X 280 mm X 340 mm

Supplying, fitting and flaxing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete (Payment of concrete will be paid seperately) (i) 450 mm x 350 mm

Wash basin vitreous china of approved make (without fittings) supplied, fitted and fixed in position on 75mm x 75 mm X 76 mm wood blocks and C 31 brackets including two coats of painting of C.I. brackets. (i) 450 mm x 300 mm size

Supplying fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. (ii) 450 mm long

Supplying fitting and foxing approved brand 32 mm dia P.V.C. waste pipe, with 33 PVC coupling at one end fitted with necessary clamps. (i)600 mm long

Supplying, Fitting & Fixing Factory made prelaminated P.V.C. door frame of size 50 mme47 mm with a wall thickness of 5 mm, made out of extruded 5 mm Prelaminated PVC sheet miter cut at two comers and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm MS. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm MS. Square tube of 19 gauge, weather seal to be provided through out the frame. The door frame shall be fixed with the wall using 65/100 mm M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for each vertical menber and minimum 2 Nos for horizontal member etc. complete as per Manufacturer's specification and direction of Engineer-in-Charge.

Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC "C" channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and 35 lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the "C" channel using PVC solvent adhesive etc. complete excluding all necessaryhardwares as per direction of Engineer-in-Charge. In ground floor.

Supplying, fitting and fixing bib cock or stop cock. (g) Supplying, fitting and fixing alloy iron with brass spindle bib cock/stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. (i) 15 mm

Supplying P.V.C. water storage tank of approved quality with closed top with lid (b) 1000 litre capacity

Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete, C.I. brackets including two coats of pointing to bracket etc.

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (i) Single Socketed 3 Meter Length (b) 110 mm

B) UPVC Fittings: a) Plain Tee ii) 110 mm. Dia.

d) Shoe ii) 110 mm. Dia.

Supplying and fixing Sheet steel Main Switches on flat iron frame on wall 15/16 A 240V DP with fuse on L&N [Anchor]

Supplying and fixing MCB SS enclosure with IP-20/30 protection, powder coated provision for two/four poleMCB,

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection SP 6-32 A

Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection 32 AMP [LEGRAND]

S & F 22 watt LED tube light set.

S &F 9 watt LED bulb set.

Supplying & Fixing Gi Modular Switch Board of the following sizes complete with three no suitable size Copper bar with holes (for Ph, N & E) fixed on 49 bakelite/Hard Rubber insulator over the MS welded chairs incl. top cover flushed in wall for housing the board after cutting the brick wall incl making

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing Gl Modular type switch board having top cover plate and making necessary connections as required

Supply & Fixing 240 V 16 A Piano key type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required

upplying & Fixing Gl Modular Switch Board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works 2 MODULE

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with

S & F 1 HP self priming pump

Distn. wiring in 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & 55 unsheathed single core stranded copper wire (Brand approved by EIC) in 19 mm bore, 3 mm thick polythen

Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing- ing (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed on Modular GI / PVC switch board with top cover plate on wall incl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface] AVG RUM 5 MTR.

For GST add @ 18% over item no 1 to 49

For Cess add @ 1% over item no 1 to 50