Loading
Loading…
Loading…
Tender Value
₹1.6 Cr
EMD Value
₹3.3 L
Closing Date
31 Aug 2026, 3:00 pm7d left
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTENANC
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The tenderer shall possess a valid Electrical Contractor License, issued by any State Government or Union Territory Administration, authorizing execution of electrical works up to 650 V. The contractor shall have in his employment or shall engage a person holding a valid certificate of competency issued by any State Government or Union Territory Administration for supervision of electrical works up to 650 V. Offers not accompanied by a valid Electrical Contractor License and requisite Supervisor competency for works up to 650 V shall be summarily rejected.
Similar Nature of Work: Supply, installation, testing & commissioning of Solar Power Plant having executed a single work of minimum 30% rating of total tendered quantity/capacity in Railway stations or Metro stations or Airports or in any Office/Service buildings/Hospitals/Residential buildings of Central Govt./State Govt./PSUs of Central or State Govt.Note: Proposed total power of Photo Voltaic Array is 12.45 KWp.
50 conditions · 8 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond the bid validity period. Non-submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non- submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria :- Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affidavit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module, uploading of physically signed Annexure V by tenderer has been discontinued.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Guntakal Division-Provision of Solar Pumps, Solar Street Lights and Solar Geysers across the Division
GTL-EM-21-2026-27~SCOR
GTL-EM-21-2026-27
Open
Works - General
6 Months
Anantapur, Andhra Pradesh
₹0
₹3.3 L
7 Aug 2026
7 Aug 2026
17 Aug 2026
29 items across 1 schedule
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 1,63,60,949.28 | ||
| — | 4.00 | — | — | ||
| Supply, Installation, Testing & commissioning of 7.5 HP Solar Deep Well (Submersible) Pumping System with A.C. Induction Motor consists of solar photovoltaic array, solar photovoltaic pump controller, submersible motor pump set (Equivalent to KSB CORACHROM 150), module monitoring system, tracking system (Remote Monitoring System (RMS)), earthing system, DC cabling, lightning protection, and surge protection device as per MNRE Guidelines Complete in all respects including civil works. | — | — | — | 41,68,960 | |
| — | 6.00 | — | — | ||
| Supply, Installation, Testing & commissioning of 1 HP Solar Deep Well (Submersible) Pumping System with DC Motor (PMSM/SRM) equivalent to KSB model no: CORACHROM1009/05+KDCSOL100E 0.75/1.0 consists of solar photovoltaic array, solar photovoltaic pump controller, submersible motor pump set, module monitoring system, tracking system (Remote Monitoring System (RMS)), earthing system, DC cabling, lightning protection, and surge protection device as per MNRE Guidelines Complete in all respects including civil works. | — | — | — | 15,39,066 | |
| — | 4.00 | — | — | ||
| Supply, Installation, Testing & commissioning of 5 HP Solar Deep Well (Submersible) Pumping System with A.C. Induction Motor consists of solar photovoltaic array, solar photovoltaic pump controller, submesible motor pump set (equivalent to KSB CORACHROM 150), module monitoring system, tracking system (Remote Monitoring System (RMS)), earthing system, DC cabling, lightning protection, and surge protection device as per MNRE Guidelines Completein all respects including civil works. | — | — | — | 24,37,900 | |
| — | 217.00 | — | — | ||
| Supplying, installation, Testing & Commissioning of the integrated type solar PV lighting system on the existing/new pole structure, comprising of 35 watt, 6V Mono Passivated Emitter and Rear Contact (PERC) Solar Panel (minimum efficiency 21%), Pulse with modulation (PWM)/Maximum Power point tracking (MPPT) Charge Controller in the box with a sleek appearance and a sturdy structure, is weather-proof, and is simple to install, with Lithium-Iron Phosphate Battery (LiFePO4), charging time 8-10 hours, Battery backup time 12 hours (minimum), LED fixture watt 35 watt, Input voltage: 12V DC , Operating temp range -5 0C to 50 Deg C, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5 with its latest amendments, Driver efficiency >85%, IP-66,IK-08, CRI >70 , under voltage and over voltage protection, ElectroMagnetic Interference (EMI) Electro Magnetic Compatibility (EMC) As per CISPR 15 , beam anlge : 120 deg, Correlated Colour Temperature (CCT) 5700°K (As per American National Standard Institute (ANSI Bin)), life time (LED, Driver & electrical circuitry) of 50K hours lamp buring hours till the 70 % of initial Lumen maintained as per LM80 extrapolation IES TM-21-11 report, automatic swich on/off, Alliuminium or Acrylonitrile Butadiene Styrene (ABS body), can be installed on a pole or wall. System lumen efficacy >120 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. All as per pre approved by Engineer in-charge complete in all respect i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required, complete with mounting structure for the battery and accessories suitable for withstand wind storm speed as per the site location. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). | — | — | — | 63,64,393 | |
| — | 71.00 | — | — | ||
| Supply, Transportaion, Erection & commissioning of 5mtr long hot dip galvanised Octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type EN8 grade foundation bolts, 1000mm long single/ Double arm bracket( Suitable for installation of above solar street light) Including the Supply of Suitable bolts with Bakelite Sheet with MCB ( for mounting inside the base compartment of pole ) including Erection & commissioning of 5 mtr. octagonal pole including RCC foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other required materials and accessories complete. | — | — | — | 13,04,525.6 | |
| — | 1.00 | — | — | ||
| Supply, Transportation, Erection and Commissioning of 100 LPD Tube Collector type Solar Water heating System confirming to IS 16544 with latest amendments, with temperature application of 60 degrees with Stain less steel - 304L grade/ Glass lined inner tank with PUF Insulation, suitable pipe connection from Collector to Solar Tank with electrical Heating back up etc., with 3 years Guarantee for Solar system and additional 2 years warranty. | — | — | — | 15,700 | |
| — | 3.00 | — | — | ||
| Supply, Transportation, Erection and Commissioning of 200 LPD Tube Collector type Solar Water heating System confirming to IS 16544 with latest amendments, with temperature application of 60 degrees with Stain less steel - 304L grade/ Glass lined inner tank with PUF Insulation, suitable pipe connection from Collector to Solar Tank with electrical Heating back up etc., with 3 years Guarantee for Solar system and additional 2 years warranty. | — | — | — | 90,941.46 | |
| — | 2.00 | — | — | ||
| Supply, Transportation, Erection and Commissioning of 500 LPD Tube Collector type Solar Water heating System confirming to IS 16544 with latest amendments, with temperature application of 60 degrees with Stain less steel - 304L grade/ Glass lined inner tank with PUF Insulation, suitable pipe connection from Collector to Solar Tank with electrical Heating back up etc., with 3 years Guarantee for Solar system and additional 2 years warranty. | — | — | — | 1,84,938.4 | |
| — | 600.00 | — | — | ||
| "Supply and fixing of 50 mm thick Rockwool insulated hot water 1 inch dia. pipe line CPVC ISI marked with fittings and clamps wire mesh and aluminium cladding with self tapping cocks. Material should be of good quality of reputed make." | — | — | — | 1,73,298 | |
| — | 30.00 | — | — | ||
| "Supply and fixing of 1 inch CPVC valve suitable for insulated CPVC pipe 1 inch." | — | — | — | 6,157.5 | |
| — | 12.00 | — | — | ||
| Supply, installation, testing & commissioning of 1 1/4" Gate Valve (ISI Marked) (Screwed End) made of Brass with connected materials. | — | — | — | 15,235.2 | |
| — | 12.00 | — | — | ||
| Supply and provision of ½" size ISI marked push cock type stainless steel water Tap in every solar water heating system. | — | — | — | 6,348 | |
| — | 2.00 | — | — | ||
| Supply and installation SINTEX 1000LTR WATER TANK with suitable stand with all connected works. Make : Sintex/Plasto/Supreme | — | — | — | 23,231.56 | |
| — | 4.00 | — | — | ||
| Supply and installation 500LTR Water Tank with suitable stand with all connected works : Make : Sintex/Plasto/Supreme | — | — | — | 30,254.56 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ListofLikelySuppliers.pdf
ATTACHMENT
GCC Apr 2022 with Correction slips
ATTACHMENT
EarthingSpecificationMFEandOther.pdf
ATTACHMENT
RITESInspection.pdf
ATTACHMENT
SolarStreetlight-1-20.pdf
ATTACHMENT
NITIREPSWorks1.pdf
ATTACHMENT
Locationdetails.pdf
ATTACHMENT
GCC_April-2022WithCorrectionSlips._compressed.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].