Establishment of the New Rythu Bazaar in Alur of Kurnool District

Earth work excavation in foundation for Buildings and depositing the earth on bank with an initial lead of 10 M and lift of 2 M in loamy, clayee soils like Black Cotton, red earth, ordinary gravelly soils excluding rock, including shoring, strutting, sheet planking, and bailing out water etc., dressing the bottom of foundation with uniform surface in all directions and thoroughly rammed before laying of concrete etc., complete. for foundations.

Filling with stone dust 2.36mm in foundations for bed and in basement in layers not exceeding 150mm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges all taxes etc., complete for finished item of work

PCC (1:5:10) using 40mm nominal size HBG machine crushed metal as per SS108, machine mixing, concrete laying in position in layer not exceeding 150mm in thickness, including cost and conveyance of all materials and water to work site and all operational incidental labour charges such as mixing concrete, laying compacting by using vibrator, curring including all taxes etc., complete for finished item of work.

VRCC M-20 Nominal Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, For Footings

VRCC M-20 Nominal Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, For Pedestals upto G.L. Beam

VRCC M-20 Nominal Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, For Plinth Beam

VRCC M-20 Nominal Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, For Columns

VRCC M-20 Nominal Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, For Lintel

VRCC M-20 Nominal Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, For Sun Shade 75 mm thick

VRCC M-20 Nominal Mix (cement: fine aggregate coarse aggregate) using 20mm size machine crushed hard granite (coarse aggregate) from approved queary including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete. curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work, For Roof Slab 125 mm thick

Providing High yield strength deformed bars of Fe 500 grade of different diametres, cuttings and bending to the required sizes and shapes, placing in position with cover blocks of approved materials and sizes tying firmly with MS binding wire forming grills for reinforcements work as per approved drawings to be supplied at the time of execution of work, including cost and conveyance of deformed bars, labourcharges such as cutting, bending, placing in position, etc., complete for finished item of work (payment will be made on the basis of weight of fabricated deformed bars only) as per standard specifications

Refilling of excavated earth in foundations and trenches, sides of foundations and basement with intial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming, including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Filling with carted gravel in foundations for bed and in basement in layers not exceeding 150mm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges all taxes etc., complete for finished item of work. For Flooring

PCC M20 using 20 mm HBG / HBT machine crushed metal and screened sand including cost and conveyance of all materials to site from approved source, centering machine mixing, laying concrete in position vibrating curing for required period labour charges for all items of work but excluding cost of steel and its fabrication charges and including all other Incidental & operational charges etc., complete as per standard specifications. For Flooring

Brick Masonry work in CM(1:6) prop with fly ash with cement solid blocks of size 290x225x140 mm for manfacturing of fly ash of 75 kgs, cement of 15 kgs ,Gypsum of 5 kgs and stone dust including cost and covyance of all materials, labour charges , seiniorage charges ,scaffolding,curing charges with compressive strength not less than 50kg/Sqcm for walls for super strucure walls

Supply, fixing and errection of R.S. Joist columns ISMB of size of 100x50mm @ 8.00 Kg/Per Mt. welded with base plate of size 200x200x10mm top and bottom and necessary gusset plate etc., including cost and conveyance of all materials and all labour charges, fixing, welding charges etc., complete as per standard specification and as directed by the Engineer-in-charge for finished item of work.

Supply and Fixing of MS Rectangle Purlins of size 80mm x 40mm x 2.60mm thick of 3.00 m long medium guage by welding of 6mm thick cleats of size 150mm x 65 mm on both sides of the pipes in position with necessary bolts and nuts washors including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work

Supply and Fixing of MS Rectangle Purlins of size 60mm x 40mm x 2.60mm thick of 3.00 m long medium guage by welding of 6mm thick cleats of size 150mm x 65 mm on both sides of the pipes in position with necessary bolts and nuts washors including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self drilling screws with neoprene washer. Side laps are stitched with self tapping / drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove.

Plastering with CM (1:5) 12 mm thick including cost and conveyance of cement and all other materials and labour charges for mixing and making surface neatly to plumb, scaffolding charges, curing etc., complete including all incidental and operational charges and all water leads and lifts etc., complete for finished item of work and as directed by the Engineer – in – charge at site for external surface as per standard specifications.

Plastering with CM (1:5) 20 mm thick including cost and conveyance of cement and all other materials and labour charges for mixing and making surface neatly to plumb, scaffolding charges, curing etc., complete including all incidental and operational charges and all water leads and lifts etc., complete for finished item of work and as directed by the Engineer – in – charge at site for external surface as per standard specifications.

Supply and fixing in position M.S Ornamental Grill Gates using M.S flats, square rods, angles etc., of approved design weighing, including necessary cuttings, bending, fabrication, welding grinding, and finishing smooth including cost of making holes in RCC or Masonry works and making good the same where ever necessary, including cost and conveyance of all materials, labour charges and all other incidental and operational charges etc., complete as directed by the departmental officers.

Supply and fixing of 12mm dia 0.60 m long mild steel foundation bolt with necessary thread, bolts, nuts and washers and placing them in position including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Flooring with ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Dadooing to walls with Glazed full body porcelain wall tiles of size 300 x 600 mm with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and thickness between 6-8 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of CM (1:5) 12 mm thick with neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm jointed neatly with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like cement, sand, water and tiles etc., and including all operational incidental charges and all labour charges etc., but excluding seigniorage charges, on materials,complete as per drawing and echnical specifications for finished item of work or as directed by Engineer-Incharge.

Painting to new walls with 2 coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls for:-External Colouring - acrylic emulsion paint - 2 Coats+1 coat primer

Painting with best Synthetic enamel paint of 1st quality in 2 coats of approved color and maker over primary coat including brushes to have an even shade including cost and conveyance of all materials and labour charges and all incidental and Operational Charges etc., complete as per standard specifications and as directed by the departmental officers.

Supplying & Fixing Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 580 mm Long including cost and conveyance of all materials like grease etc and labour charges etc., complete

Supply and fixing of WPC frame size 100x63.50mm and 28mm thick Single shutter including cost of material and 125mm long M.S hinges 6nos,230mm long aldrop 2 Nos. 150mm long tower bolt 2 Nos, 150mm handle 4 Nos, Door Stopper 2 Nos including cost of labour and finishing charges etc complete as pert directed by the engineer in charge at site

Supply and fixing of WPC frame size 75x45mm and 18mm thick shutter including cost of material and 100mm long hinges 3nos, 150mm long aldrop 2 Nos, 150mm handle 2 Nos including cost of labour and finishing charges etc complete for finished item of work

Providing and fixing COMPOSITE SLIDING WINDOW fabricated from roll formed sections made of Galvanized Steel colour Coated/Powder Coated (Base Steel as per IS 513 "D" quality, Galvanized as per IS 277 with Zinc of 120 grams /Sq.Mtr.) with total coated thickness of 0.58 mm, powder coated with pure Polyester Powder up to 50-60 microns thick and the section for external frame bottom of 68 x 25mm (Aluminium), External frame sides & Top of 68 x 25 mm (Aluminium), section for shutter of 59 x 23mm and Lap Strip of 30 x 7.5mm (uPVC) cut to length and mitre joined with L-bracket and 5 mm plain float Galss with Ethyl Propylene Diamine Monomer (EPDM) gasket, the corner bracket for external frame made of Aluminium 'L'-Angle, Corner Bracket for internal frame made of Polyproylene, Crescent Latch, Rollers, & EPDM Gaskets for shutters, wool pile for lap strip, Bump Stop Base & Rubber for shutter stopper including fixing to brick/concrete masonry using Nylon self-expanding caps and driving MS electroplated 80mm long screws into the caps through frames and fixing 10mm square guard bars with 6" pitch centre to centre (152.4mm) completed for finished item of work.

Providing and placing on terrace (at all floors levels) polyethylene syntex water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet, outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials, labour charges etc., complete as per Standard Specifications and as directed by the departmental officers

Supply and fixing of 110mm PVC pipe 4Kg/cm2 including cost and conveyance of all materials and labour charges etc., complete work.

Supply and fixing of 75mm PVC pipe 4Kg/cm2 including cost and conveyance of all materials and labour charges etc., complete work.

Supply and fixing of ASHIRVAD CPVC PIPES and fittings are equal ant for Ht and Cold confirming to IS 15778 : 2007 with malleable specials such as Tees, Elbows, Check nuts, Unions, Bushes, Etc., Solvent cement including fixing in walls ceiling floors include for necessary excavation ion all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making holes in walls ceiling etc., and making good the chased surface in cement motor and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the engineer in Charge. 28.60mm OD CPVC Pipe - SDR 13.5

Supply and fixing of ASHIRVAD CPVC PIPES and fittings are equal ant for Ht and Cold confirming to IS 15778 : 2007 with malleable specials such as Tees, Elbows, Check nuts, Unions, Bushes, Etc., Solvent cement including fixing in walls ceiling floors include for necessary excavation ion all sorts of soils, chasing in the walls etc., refilling consolidation with the excavated earth and making holes in walls ceiling etc., and making good the chased surface in cement motor and complete. When making a transition use metal threads fittings, including all taxes for finished item of work as directed by the engineer in Charge. 22.20mm OD CPVC Pipe - SDR 13.5

Supply and fixing of 110 mm Nahany Trap, including cost and conveyance of materials and labour charges etc,. Complete for finished item of work

Supply and fixing of 25mm dia 1.8mm thick P.V.C. Pipe (ISI MARK) outside in wall with all required accessorice including masonary work for light, fan and separate plug point with well seasone wooden deep box incluidng all labour charges etc., complete make:sudhakar/modi.ISI as per standard data.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) Fire Retardant PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylem sheet covering to switch control box inlcuindg all labour charges etc., complete For Light point as per standard data.

Wiring with 2 runs of 14/0.3mm (1.0 Sqmm) Fire Retardant PVC insulated flexible copper cable (ISI Mark) in existing pipe with 6A Switch, Ceiling rose and 3mm thick hylem sheet covering to switch control box inlcuindg all labour charges etc., complete For Fan point as per standard data.

Supply and fixing of 6A 3 Pin wall plug socket with 6A switch control on a common switch board with earth continutity including wire leads, earth connections along with all labour charges etc., complete as per standard data.

Supply and fixing of 20A modular swich with 20 A modular 3 pin plug socket with earth continutity including wire leads, earth connections along with all labour charges etc,. Complete

Supply and fixing of batten holder slanting holder in lieue. of ceiling rose of light point complete with all connections and all labur charges with 40W bulb (for new installation) as per standard data.

Supply and run of 2 of 36/0.3mm (2.5 Sqmm) FR P.V.C insulated flexible copper cable in existing pipe for mains including all labour changes etc., complete as per standard data.

Supply and fixing of Electrical fan regulator on existing common switch board, including all internal connections and labour charges etc., complete

Supply and fixing of 20W LED Tube light luminaire (on existing light point connection) including all labour charges etc., complete

Supply and transportation of 45 W LED Street light Luminaire made of pressure diecast alluminium body with powder coated, having protective toughned glass, Supply Input voltage 120 - 270 V AC, P.F > 0.90, high power LED's having System efficacy > 100lm/W and junction temprature < 70°C, with Ingrees protection IP66, Luminaire performance complies to IS 10322 (Part 5 / Sec-3), Driver surge protection 4KV, In house additional Surge protection 10 KV with optics distribution , THD<10% at 110 Volts AC, driver efficiency >90%, CCT: 3000K - 5700K, minimum CRI>70, etc., complete. Makes : As per list of recommended brands as category I.

Drilling of bore wells by down the down hammer to a finished diameter of 112/165 mm in all formations/ stratas such as medium hard rock formation etc., including drilling in over burden soils to a diameter of not less than 200mm including insertion of 180mm diameter including the insertion of unplasticized PVC pipe with working pressure not less than 6kg.sq cm as casing pipe confirming to IS specification No. 4965/1988 with ISI mark upto a depth as directed by the department and flushing 8hrs for development, conducting yield test including transportation of building rigs, supporting vehicles, and including crew charges and all other charges required for fixation of pipe assembly complete all done to the satisfaction of department and as stipulated in the technical specification enclosed to these schedule but excluding the cost of PVC casing pipes, couplings and cap, the entire work should be carried out as per IS 2800 part I and II/1979. The rate is inclusive of all tazes and for finished item of work. For upto 90m depth

Drilling of bore wells by down the down hammer to a finished diameter of 112/165 mm in all formations/ stratas such as medium hard rock formation etc., including drilling in over burden soils to a diameter of not less than 200mm including insertion of 180mm diameter including the insertion of unplasticized PVC pipe with working pressure not less than 6kg.sq cm as casing pipe confirming to IS specification No. 4965/1988 with ISI mark upto a depth as directed by the department and flushing 8hrs for development, conducting yield test including transportation of building rigs, supporting vehicles, and including crew charges and all other charges required for fixation of pipe assembly complete all done to the satisfaction of department and as stipulated in the technical specification enclosed to these schedule but excluding the cost of PVC casing pipes, couplings and cap, the entire work should be carried out as per IS 2800 part I and II/1979. The rate is inclusive of all tazes and for finished item of work. For upto 90m to 150 depth

Supply and delivery of 180mm diameter PVC pipes with working pressure of 6Kg/Sqcm as casing pipe for borewells confirming to IS specification No.4958/1988 with ISI mark. The rate is inclusive of Cost and conveyance of all materials to work site and all labour charges, all taxes etc., complete for finished item of work.

Supply and delivery of 180mm diameter PVC casing pipe perforation charges to pipe including Cost and conveyance of all materials to work site and all labour charges, all taxes etc., complete for finished item of work.

Supply and fixing of PVC bore cap suitable for 180mm dia PVC pipe used for bore well. The rate is exclusive of all taxes.

Supply and Transportation of 3.00HP 15 Stage, 5 star Three phase ISI submersible motor pumpset suitable for 4" Bore well. including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work. Makes: Kirloskar / Crompton / Texmo / KSB / Aryan Varsha / Lubi.

Supply and fixing of HDPE (32mm dia) Pipes @ 12.50 Kg/Sqcm conforming to IS 4984 -1995 including transportation to anywhere in A.P,including Excise duty and Sales Tax and labour charges for fixing and connecting etc., complete for finished item of work

Fabrication , transportation and supply of suitable size panel board for single phase submersible motor above 2 Hp to 3 HP consisting of relay, Contactor, starting and running capacitors, Voltmeter, Ammeter, indicator lamps, MCB , on/off switch including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.. Makes: LT / LK / BCH / Crompton/ Siemens.

Supply and fixing of 40mm dia brass Non return valve ISI make including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.

Supply of PVC insulated 3 core 4.00 Sqmm sheathed flexible copper cable for voltage up to 1100V as per IS 694/1990. including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work. Makes: Finolex / RR Kable

Manufacture, Supply and Delivery of Unplasticised PVCs pipes 200 mm dia fie portable water supplies confirming to IS: 4985/2000 (Ond nevision) with bell ends (Socket) as per specification in light (Grey/Natural Ivory Grey/Any other color (except white) inclusive of transportation to the sub divisional stores anywhere in Andhra Pradesh excluding taxes

Supply and Fixing of Gunmetal (GM) Ball valve with SS Ball and 55 Spindlie as per IS-Class 1, indian make heavy type 20 mm NB Size including labour charges for fixing the shutter to the frame etc., complete for finished item of work

Supply and Fixing of 12.7 mm NP bib tap Indian make heavy dutys including labour charges for fixing the shutter to the frame etc., complete for finished item of work

Supply and fixing of Pre-Cast RCC Poles of size 0.15M x 0.15M 2.40M Height including cost and conveyance if all materials to site from approved source, including cost and conveyance of all materials and all labour charges completed as per standard specifications and as directed by the Departmental Engineer-in-Charge

Supply and fixing of Galvanised steel barbed wire (15 278-1962 Type 1) weighing 9.38 Kg per 100 metres (min.), straining and fixing to any type of standard rails, straining bolts, including securing with provision of galvanised mild steel wire, stapples or steel pins etc., as directed (Posts and struts of wood, concrete, steel, etc.) and straining bolts shall be paid for separately) including cost and conveyance of all materials to work site and all labour charges etc., complete for finished item of work.