S0464/25 - Swachh Bharath Mission - Construction of Public Toilet -Swachh Bharath Mission - Electrification

Electrification

90.2.1.1:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single Control light point with 6A, plate ceiling rose - Short point

90.2.1.3:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Single control light point without ceiling rose - Short point

90.2.1.6:Supply and wiring points according to IS 732-1989 using rigid PVC conduit of minimum size 20 mm with specials conforming to IS 9537 part III 1983 and with suitable size specials conforming to IS 3419-1988, fixing the conduit using metal saddles spacing not exceeding 50 cm or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping/ soldering etc complete with suitable size modular type metal switch boxes, modular type front plates (white) etc. up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete. All the terminations in the switch boards and DB's shall be tinned and the wires shall be drawn and fixed along the periphery of the box using suitable ties, tie mounts etc as required. (RoHS compliant modular accessories).Combined plug point with 6 A, 5 pin plug socket controlled by 6 A, switch in the same switch board as that of light points

90.3.20.3:Supply & installation of light fittings on TW round block Supply, conveyance installation testing and commissioning the light fittings of following types made of CRCA with 0.5mm thickness complete with all accessories and lamps etc. directly on wall or ceiling with PVC round block neatly painted to suit the fitting and giving connection with required length of 16/0.20mm 3 core copper conductor flex wire conforming to relevant ISS and giving connections as required.1200 mm 1X20W LED Lamp with box type fixture

OD354609/2025-2026:Supply and fixing Cast aluminum Bulk head fixture on wall/ceiling with front clear glass and giving connections

1.58:Supplying and fixing PVC batten/ angle holder including connection etc. as required.

OD354597/2025-2026:Supply and providing 9 w LED Bulb on existing batten/Bulk head/ pendent Light

90.3.18.2:Supply, fabrication, conveyance and fixing the following sizes of B class GI pipe bent to shape / cut and welded to shape and fixing the same to wall / parapet using clamps as noted along with each size, painting with 2 coats of synthetic enamel paint over a coat of zinc chromate primer, making good the damages, colour washing etc as required.32 mm dia with HG company fabricated clamps

90.15.4.3:Supply Conveyance, installation, testing and commissioning of 70W LED street light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing,acrylic cover complete with THD Less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer)

90.4.8:Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

90.4.10:Conveyance, installation , testing and commissioning of exhaust fans of size up to 450mm in the existing opening, fixing necessary anchor bolts / bolt and nuts etc., as required including giving connections with the supplied wire along with the exhaust fan.

OD354596/2025-2026:Supply of 200 mm sweep Light Duty Exhaust fan in plastic body with self opening lowers working on 230v single phase A/C

90.6.10.1:Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required20 mm

90.10.3.15:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )32A DP switch with indicator

90.10.3.33:Supply and Fixing the following modular switches & accessories in the existing front plates and giving necessary connections as required (RoHS compliant )25A 3pin Shuttered socket

1.24.3:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.15/16 amp switch

1.24.5:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet

1.27.2:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.3 Module (100mmX75mm)

1.27.3:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.4 Module (125mmX75mm)

1.27.4:Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required.6 Module (200mmX75mm)

1.17.3:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 X 1.5 sq.mm

1.17.12:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

1.17.21:Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface / recessed steel/ PVC conduit as required.3 x 4 sq. mm

2.3.3:Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door

2.10.1:Supplying and fixing 5A to 32 A rating, 240/415 volts, 10 kA, ""C"" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole

2.12.1:Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.40 amps

2.14.2:Supplying and fixing following rating, double pole, (single phase and neutral),240 volts, residual current circuit breaker (RCCB), having a sensitivity current 30 milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps

5.4:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

90.16.1.1:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.00 mm copper conductor ( 14 SWG)

90.16.1.2:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required2.65 mm copper conductor (12 SWG)

90.16.1.3:Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required3.15 mm copper conductor ( 10 SWG)

90.16.5.1:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG)

90.16.5.2:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.65 mm (12 SWG)

90.16.5.3:Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.3.15 mm (10 SWG)

1.21.4:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.40 mm

OD354603/2025-2026:Supply and providing 8/10 mm SS hook

OD354601/2025-2026:Supply and fixing 25x6 mm brass bolt, nut and washer

OD354598/2025-2026:Supply and fixing 12x3 mm brass bolt, nut and washer

OD354602/2025-2026:Supply and fixing Hot press molded SMC meter box size 350x250X150 mm Sintex make GS-MB- 3425or equivalent make

OD354600/2025-2026:Supply and fixing 63 A 2 way neutral link on SMC or DMC base and giving connections

OD354599/2025-2026:Supply and fixing 63 A Fuse unit with HRC link on existing board using suitable bolt , nut and giving connections

OD370378/2025-2026:Supply, conveyance, installation, testing and commissioning of 1.0 HP open well submersible motor pump set of pipe size 32X32 mm having a head range of 12/16 mtr working suitable for 1 phase , 240V, 50 Hz AC supply .TEXMO/ AQUATEX make Cat. No: ASM SP 625K or equivalent make and giving connections and trail run on full load.

OD370377/2025-2026:S & F Motor starters of the following ratings Submersible pump controllers with ammeter, voltmeter and DPMCB for single phase 1.0 HP submersible motor pumps (DOL) L and T make MF-G1 or equivalent make

OD370379/2025-2026:Supply and providing 12 mm nylon rope

OD370380/2025-2026:S&F 32mm Non Return valve .

OD370382/2025-2026:S&F 32mm Ball valve .

OD370383/2025-2026:supply, threading, laying and jointing 32 mm12 kg HD pipe with all accessories for suction/delivery pipe

OD370392/2025-2026:Supply, conveyance, installation, testing and commissioning of fully automatic electronic water level control system using with suitable level sensors for upper tank and lower tank or sump indicating Empty /Normal/Low/Full for upper tank and Empty /Normal/Half/Full for sump conditions indicating using LED , necessary LED indications for voltage, power ON , Pump ON , Pump Fault and motor fault cut off with buzzer alarm and option for Auto/Manuel mod operation suitable for single phase motor pump set etc.

90.6.6.2:Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes.2.50 sq mm

OD354604/2025-2026:Supply, conveyance, installation, testing and commissioning of Fully Automatic Floor /Wall mounted type Sanitary Napkin Incinerator with a capacity of 10 pads /cycle and made of CRCA steel having minimum 1.20 mm thickness and internal insulation using thermal ceramic sheet , epoxy powder coated housing with SS covering at inside , with suitable length flexible metallic flue gas pipe and working on AC single phase 220-240V, 50Hz power supply, provided with suitable range protection MCB, ON, OFF, temperature cut off indicator with LED indication lamps/ Display indication etc. and unit conform to the Municipal waste management rules 2016/ CPCB guidelines . Make : ZETA OZON INVENTIONS Model : ( ZOI -NIG /AC/10/V.1 ) or equivalent HLL or equivalent with warranty of 3 Years including Fully Comprehensive AMC

OD368085/2025-2026:Supply Installation Testing and commissioning of Existing ACP based LED Signage Name board Matter : PUBLIC TOILET in English and Malayalam with 3 nos Logo State Govt. of Kerala, Swachh Bharath and Suchithwa Mission with name of Ezhazhakode Eloor nagara Sabha . Name board size: 574cm x 78 cm or nearest size , English / Malayalam letter size : -25 cm height 3D ACRYLIC LETTERS and Logo 3D ACRYLIC LED BOX with clear VINYL UV PRINT with LED , board consisting front 3 mm Acrylic, side - Aluminum Trim channel , 60 mm Trim cap including 4 mm PVC tray for LED laying and fixing on existing ACP Panel and giving necessary connections .