Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹36.5 LAccepted-AOC | L1 | Accepted-AOC ACEEPTED BEING LOWEST TENDER | |
| 2 | L2₹37.0 L+₹27,133.05 (0.74%)Rejected-AOC 137 3 STREET NO 4 RAJINDER NAGAR DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | L2 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 3 | L3₹37.8 L+₹1.1 L (2.96%)Rejected-AOC 1 259 CHUKKUWALA DEHRADUN UK | DEHRADUN | DEHRADUN | UTTARAKHAND | L3 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 4 | L4₹37.9 L+₹1.2 L (3.38%)Rejected-AOC C 9 53 SECTOR 8 ROHINI NEW DELHI 110085 | NEW DELHI | NEW DELHI | DELHI | 110085 | L4 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER | |
| 5 | L5₹40.8 L+₹4.1 L (11.1%)Rejected-AOC | L5 | Rejected-AOC REJECTED BEING NOT LOWEST TENDER |
Tender Value
₹48.1 L
EMD Value
₹96,200
Closing Date
15 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE I RND DEHRADUN
GE I RND DEHRADUN DEAL RESIDENTIAL COMPLEX RAIPUR ROAD DEHRADUN 248008
ADDITION/ALTERATION AND SPL REPAIR TO BLDG NO P-65 AT VIGYAN VIHAR RESIDENTIAL AREA IRDE AND PROVISION OF PCC BLOCK WITH PATROLLING TRACK ALONG WITH SECURITY WALL AND HARDSTANDING IN FRONT OF CERS, TECH AREA-III OF DEAL UNDER GE (I) RND DEHRADUN
2022_MES_565012_1
GE(I)RND/9205/E8/22-23
Open Tender
Civil Works
Item Rate
180 days
DEAL DEHRADUN
Class D Category a (i) FOR UNENLISTED CONTRACTOR (i) Enlistment criteria may be seen in Para 1.4 and 1.5 of section of Part I of MES Manual on contracts-2020 as available in all MES formations (ii) Copy of police verification /passport.
6 documents required · 6 mandatory
₹500
Yes
GE I R N D DEHRADUN
₹96,200
Yes
6 Jan 2023
24 Nov 2022
17 Dec 2022
24 Nov 2022
15 Dec 2022
8 Dec 2022
24 Nov 2022 - 8 Dec 2022
Amount
Demolition of cement concrete of any description and in any position not other wise specifically provided for (in roof ) complete all as specifed and directed,
M & Lfor 75 mm thick Plain Cement concrete type C- 2, 1:3:6 (40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.
M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with liquid water proofing compound on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed. Note:- The WPC shall be measured and paid separately under respective items of Sch "A" BOQ.
Roughening surfaces of old concrete floor/terrace by picking including taking down existing detoriated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiseling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance not exc. 1000 metre, complete all as specifed and directed .
M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for Non approachable roofs complete all as specifed and directed,
M&L for Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. complete all as specifed and directed,
M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane for approachable roofs with One layer of APP based polymeric membrance minimum weighing 3 Kg/ Sqm & minimum 3 mm thickness reinforced with polyster non woven fabric (wt not less than 150 gms/ sqm) laid on primed surface by forced application complete all as specified. with lap of 100 mm and the over lap shall be sealed by flame complete all as specifed and directed,
M&L for Applying two coats of aluminum paint on top of membrane . complete all as specifed and directed, NOTE:- The work of water proofing treatment shall be got executed throughh expert team of manufacturers or authorised applicator of manufacturer and shall be approved by GE.
Supply only Liquid water proofing compound ISI Marked (used 200 ml per bag of cement) complete all as specified and directed.
M&L for PCC 1:2:4 type B1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, coping, benching, kneelers, apex stone, bed plates, kerbs, etc. including weathering, slightly rounded or chamfered angles and throating, including necessary from work etc complete all as directed.
Taking down chowkhats with shutters (without taking off shutters from frame) not exc. 1.50 sqm each complete all as specified and directed.
S&F powder coated aluminium frame for doors, windows or partition including aluminium beading, hinges of required size,jointing cleats, screws, dash,fastners,plug for fixing with wall, columns etc complete all as specified.
S&F powder coating anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing complete all as specifed and directed
S&F 4mm thick figureed glass , pin headed type and glazing with oil putty in squares of any description not exceeding .5 sqm in each pane (work will be carried out upto 4th floor) complete all as specified and directed.
S&F stainless steel wire cloth 0.36 mm Nominal dia and average width of aperature 1.4 mm and fixed with stainless steel wire staples in repair complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description and in any position complete all as specified and directed
S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framed work and similar works conforming to Fe-290 Gd E-165 complete all as specified and directed.
M&L for Pre- painted colour galvalume aluminium Zinc coating GI based corrugated tile profile steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed
M&L for Pre- painted colour galvalume aluminium Zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws etc complete all as specified and directed
S&F mild steel work in tubular trusses complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 and complete all as specified
S&FMS Plates (plain or chequered) Fe-290 (Gde- E- 165) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed.
S&F 20 to 25 mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed to other end, or screwed both ends, each screwed and to fitted with washers and one hexagonal or square nut exc 30 cm long complete all as specified and directed
M & L for excavating hard/dense soil in post holes (or similar holes) each n exc 0.5 cum , getting out , returning , filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering , and removing surplus soil to a distance n exc 50 m and making good surfaces.
M&L for precast rubber moulded pre painted glossy finish in two different coloured concrete Interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade complete with & including 50 mm thick compacted sand cushioning layer and joint filled with sand etc complete, all as specified and directed.
M & L for providing and injecting chemical emulsion for post construction Anti-termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron. complete all as specified and directed.
M & L for At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same etc. complete all as specified and directed.
M&L preparation of new steel and iron surfaces of any description exc 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zink chrome. complete all as specifed and directed
M&L for PVC SHEET WALL PANELLING of solide thickness 5 mm consisting of panels of desired size stuck on inner frame work of 50mm wide strips of 5mm thick prelam PVC sheet. The panel & strips shall be of 600 kg / cbm density manufactured by an ISO-9000 certified company. The strips should two PVC strips. The PVC strip shall be fixed to the wall using 65mm long M.S screws through the groove in the strip by using PVC fasteners. The distance between two screws shall not be more than 200mm. A groove of 2mm may be left at the joint of two panels for aesthetic looks. The exact size of the panel and correspondingly of the grid may vary depending on the size of the wall. Optionally a U Channel at top, bottom and side edges and strips of 5mm thick PVC sheet of width 75mm feathered at the edges shall be stuck at the places where two panels are joined, using solvent cement and colour approved by GE complete all as specified and directed ( Note- Including all nesscesary fittings and scafolding for heighted site)
Demolition of reinforced cement concrete of any description and in any position complete all as specified and directed.
S&F rotational moulded polyethylene water storage tanks 1000 ltr capacity (cylindrical vertical with closed top) hoisted with and including 20 mm dia ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed in position all as per SSR Part I complete all as specified & directed.
S&F 20mm bore GI tubing medium grade with all fittings and fixed to wall, celling or laid in floors with and including Taking up or down 20 mm steel tubing and connection including cleaning for re-fixing or removal to store. all as specified and directed .
S&F 15 mm bore GI tubing medium grade with all fittings and fixed to wall, celling or laid in floors with and including Taking up or down 15 mm steel tubing and connection including cleaning for re-fixing or removal to store. all as specified and directed .
S&F in repair for 110 mm dia PVC ( SWR) bend .Complete all as specified and directed.
Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and directed
M&L for Brick work with sub class B bricks ,straight or curved on plan exc 6m mean radius built in CM 1:6 Complete all as Specified and directed
Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys , scrubbing down with water etc, complete all as specified and directed.
M&L for plastering 15 mm thick on fair faces of concrete/brick surfaces in cement mortar 1:6 finished fair and even without using extra cement complete all as specified and directed.
M&L Complete removing of existing treatment from wall / ceilling by using machinary complete all as specified and directed.
M&L for Prepration of new/ scrapped surface of wall / ceilling and applying 3mm thick Asian acrylic damp proof wall care putty in two coats as per manufactur instruction complete all as specified and directed.
M&L for Preparation of puttyied / new plaster surfaces of wall/ceiling and applying one coat of alkali resistant primer complete all as specified and directed.
M&L for Prepration of primed surfaces of wall / ceiling and applying two coats of oil emulsion distemper complete all as specified and directed.
M&L for Prepration of primed surfaces of wall / ceiling and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.
M & L For Separating, scraping and cleaning of reinforcement complete all as specified and directed.
S& F 15 mm bore Pillar taps, cast copper alloy fancy type with capstan heads CP screwed down high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe. complete all as specified and directed
S & F 15 mm Bib taps, Fancy type chromium plated handle, sc-rewed down, screwed for iron pipe or for brass ferrule and fixed, complete all as specified and directed
S&F vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, MS brackets 2 numbers including cutting for and pinning in ends of brackets complete all as specified and directed.
S&F PVC connection 15mm size with PTMT nuts of length 450mm,complete all as specified and directed
M & L for18 to 20mm thick Granite stone slab (of any type/Colour ) Slabs machine cut in skirting/dado and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing over and including 15mm thick cement mortar 1:4 , on fair faces of brick work or concrete surfaces as backing for Granite stone slab complete all as specified and directed.
M&L non skid coloured ceremic tiles 7 to 8 mm thick (square/rectangular) area of each tilles exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. Set & jointed in neat cement slurry and pointed in colored cement to match coloured tiles laid over and including 15 mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed
M&L coloured glazed ceremic tiles in vertical surface 350x250x7 mm /450x350x7 mm thick set & jointed in neat cement slurry and pointed in colored cement to match coloured tiles laid over and including 10 mm thick rendering in cm (1:4) complete all as specified and directed
S&F brass chromium plated Tubular towel rail, 20mm dia, D type, 60 cm long between flanges complete all as specified and directed
S&F in repair Grating 100 mm dia of CP with or without hole complete all as specified and directed.
S&F in repair PVC (SWR) pipe 110mm bore single socketed in any length with rubber ring jounts laid in trenches or in floor.complete all as specified and directed
S & F in repair For PVC(SWR) pipes 75 mm bore single socketed in any length with rubber ring joints fixed to walls.
S & F in repair PVC (SWR) bends any radius 110 mm bore
S & F in repair PVC (SWR) bends/shoes, 75 mm bore dia fitted with access door.
M&L for surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish of any kind of soil , lead up to 50 m and lift up to 1.50 m and , as directed by Engineer-in- Charge:
M&L for PCC 1:5:10 type E-2 using 40mm graded crushed stone aggregate as in foundation filling, mass concrete and sub base of floor etc complete all as specified and directed.
M&L for 100mm thick Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) using 20 mm nominal size of stone aggregate finished with a floating coat of neat cement, including cement slurry, complete all as specified and directed.
M&L for Finishing (two or more coats applied @3.28 ltr/10 sqm) walls with water proofing cement paint of required shade complete all as specified and directed.
M&L for 4.8 mm thick sheet glass ordinary quality and glazing with oil putty in square area exceeding 0.5 Sqm in each pane complete all as specified and directed.
M/S Anil kumar
Sharda Enterprises
Amit Associates
Gupta Brothers
M/S P K ARORA
Bedi Refrigeration Works
SHREYA INFRA DEVELOPER & CONSTRUCTION COMPANY
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .