CA NO. CWE/HILLS/RKT/111 OF 2025-2026 SPECIAL REPAIR TO OP WORKS SHELTER NO 5112/19 AND 5112/21 OF 301 ARMY AVN SQN (SPL OPS) AT MIL STN HALDWANI UNDER GE MES RANIKHET

Amount

Dismantling of wall and ceiling boards (fiber, pulp, insulation etc,) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

S & F false ceiling at all heights with GRG (Glass Fibre With Semi Reinforced Gypsum) false ceiling tiles of Size 595 x 595 mm of approved texture design and patterns with black color or after fixing painting will be done having moisture content less than 2%, humidity resistance edged GRG thick square edged of 99%, NRC0.50 to 0.75 as per IS false ceiling GRG false ceiling 8225:1987, Noncombustible as per BS tiles tiles 4 76 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true with semi perforated 12mm thick micro tegular edged GRG false ceiling tiles horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge.

Supply & fixing PVC Fluted panel /grooved pattern of matt/glossy finish of any size and colour 8 to 25mm thick for ceiling and wall including all fixing viz, U and L as design and pattern including all necessary framed works as per manufacturer s instruction , make as approved by GE complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S& F Rolled sections channel angle Tee section and in tubular section as in main and cross beams, hip and jack rafters; purlins,post where connected to common rafters and running rails and embbeded in concrete complete .

S&F 20mm thick cement fibre board including all fittings ,fixtures,screws,nuts/bolts of appropriate shape and size complete all as specified and as directed

Supply & fixing 3.3mm thick Linoleum sheet , plain coloured, laid dry in floors including stretching, cutting , fitting and incl sealed with an approved adhesive complete all as specified and directed.

Taking down chowkats or frames n.exc 1.50 sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

S&F aluminium three track powder coated of any colour (thickness of powder coating not less than 50 micron) sliding window with three sliding shutter the size of outer frame three track 92x31.5x1.2mm (using two track for glazed window shutter and one track for wire gauged), the section shutter size 37x18x1.2mm) and glazing with 4.8mm thick glass (Plain/floated) incl allround suitable rubber gasket and with MS wire cloth 0.36mm nominal dia of wire and average width of aperture 1.4mm and fixed on aluminium flat and inserted in the frame of shutter with tracking arrangement each sliding window shall be provided with one number handle incl rocking arrangement & 2 numbers sliding rollers of nylon with incl all necessary fittings complete all as specified and directed.

M&L for two coat of synthetic enamel paint to New decorated steel surfaces of girth exc 10cm including preparation of surfaces and one coat of red oxide primer complete all as specified and directed

M&L for one coat of synthetic enamel paint to old decorated steel surfaces of girth exc 10cm including preparation of surfaces complete all as specified and directed

Taking down carefully aluminium/copper wiring of any size (for light, fan, socket or power etc complete) including fixture and fittings such as switches, sockets, ceiling roses, pendent holders regulators, tube lights etc and making good disturbed surfaces of wall, roof etc to match with existing surface.

Supply & Fixing point wiring for one light point/ fan (independent) point controlled by one, one way switch with 1.5Sqmm size, PVC insulated and unsheathed 1100volts grade, single core stranded (multistrand) copper conductor (FRLS) PVC cable drawn into & including medium grade PVC conduit (not less than 20mm outer dia ) with all fittings and accessories fixed concealed (including chase cutting in brick/ stone masonry walls for fixing conduit and plastering and whitewash/colouring the external surface and matching the same with existing surface) and sunk cast iron or pressed steel terminal boxes for mounting fittings like switches, sockets & fan regulators etc with 3 mm thick plastic laminated sheet covers fixed with brass screws and cup washers including one continuous run of PVC insulated (green colour) 1.5 Sqmm multistranded copper conductor cable earth wire and connected to earth dolly complete all as specified and directed Note:- wiring shall be done in colour coding as directed by Engineer in charge.

All as per item No.13 herein before but one light point controlled by one two way switch

All as per item No. 13 herein before but one socket outlet 5 Amps on the same board.

All as per item No. 13 herein before but one 3 pin socket outlet 5 Amps independent.

All as per item No. 13 herein before but one bell point controlled by one bell push switch.

All as per item No. 13 above but with 2.5 Sq mm two single core and 2.5 Sq mm one single core as earth wire for 5/15 Amps socket.

All as per item No 13 herein before but wiring with 4.0 sqmm copper wire (FRLS) PVC and 4.0 sqmm earth wire for socket outlet 5 pin 15 amps on independent board.

Supply and fixing of following rating of modular type ,white polycarbonate,switches, sockets, fan regulator suitable for 250V, AC, 50Hz.Electrical supply and as directed by Engr-in-Charge.

(a) 6 Amp one way switch, 1 module

(b) 6 Amp two way switch, 1 module

(c) 6 Amp 2/3 Pin combined socket shuttered, 2 module

(d) Modular Switch 1 way 16 Amp, 1 Module

(e) Modular socket 6A/16Amp, 2/3 pin combined, 2 Module

(f) 6 Amp bell push switch modular type

(g) Steped type electronic fan regulator modular, 120W-2 module

Supply and fixing of following sizes of modular front plates, white with frame on existing boxes complete as required.

(a) 2 Module

(b) 3 Module

(c) 4 Module

(b) 6 Module

(c) 8 Module

Supply and fixing anodised rust proof 18 SWG MS box, flush type of following sizes (to be of same make as modular switches and sockets) to be recessed in wall /gypsum partition complete as required :-

(a) 75mm x 105mm x 50mm deep (1-2 Module)

(b) 75mm x 105mm x 50mm deep (3 Module)

(c) 75mm x 105mm x 50mm deep (4 Module)

(d) 75mm x 210mm x 50mm deep (6-8 Module)

Supply and fixing bell electric multi musical type AC 230 volts, 50 Hz complete all as specified and directed.

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in to and including Rigid non metallic PVC conduit ( ISI marked) Heavy grade, 20 mm dia (external) inclusive of junction/terminal boxes, all fittings and accessories fixed concealed with and including 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB to sub main DB including cutting and chasing and making good surface as original by plastering and whitewash/ colour/ distemper etc including taking down existing old sub main wiring complete all as specified. Note :1 The cost of earth wire is included in the quoated rates. 2. Two run of 4 sqmm, one run of 4 sqmm and one run of PVC conduit will be measured as one unit ie one running metre”

All as per item No. 40 herein before but 2 X 6 Sqmm inclusive 6 Sqmm earth wire.

S&F ceiling rose surface bakelite 3 terminal with base plate complete all as specified and directed.

Supply and fixing LED lights T-5 fitting 1x 20W (warm/milky white as required on site), 220V, AC with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose 1.5 RM and life of tube light not less than 50,000 hours complete all as specified and directed.. Note:- LED tube light shall be purches to get minimum 2 year warrenty of material from manufracturer.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible opper conductor cable of suitable size complete all as specified and directed.

S&F lamp holder (modular type) PVC insulated body with back plate for angle/battern fitting complete all as specified and directed.

Supply & Fixing sheet metal enclosure for SPN DBs (double door type) Single pole and neutral 8way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed.

Supply & Fixing sheet metal enclosure for SPN DBs (double door type) Single pole and neutral 4 way including blanking plate as required with 200 Amps rated bus bar, 240 volts fixed complete all as specified and directed.

Supply & Fixing 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

Supply & Fixing 240V, 10KA 'B' curve miniature circuit breaker (MCB) of single pole 5 to 32 Amp and current carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed.

M&L for taking down ceiling fans / wall mounted fans of any size / sweep after disconnecting the wire from existing ceiling rose and refixing the same after painting the same with synthetic enamel paint by spray machine including filter after cleaning dust, taking out burnt/damaged winding, bushes & cleanig of stator and rotor incl etc. Rewinding with 26/27 SWG of enamelled copper winding wire replacement of bearing /bushes, condencer 2.5/4 mfd handing and testing of fan with and including provision of 23/0.0076 copper flexible core twin core not less than 1.5 meter in length and make the fan operational with a guarantee period of one year after installing the repair fan complete all as specified and directed.

Supply and Fixing propeller type AC ventilating fans 230 volts, 50 C/S heavy duty 1400 RPM, 300 mm sweep (Exhaust fan) metal body and blades protected by metal guards,Bird guard for safetry,two sleeves bearings, complete including the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core white 23/.0076 copper cable, rubber insulated from ceiling rose to exhaust fan motor complete all as specified and directed.

S&F sheet metal enclosure with socket plug top and MCB single pole and netural enclosure with a two pin and earth plug and socket complete with one double pole MCB 20 Amp 240 Volts complete all as specified and directed.

S & F LED light fitting 1X10 W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Note:- Contractor shall submit 2 year warranty of material from manufracturer alongwith purchase voucher.

Supply and fixing LED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type (warm/milky white as required on site) with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling, life of tube light not less than 50,000 hours including connecting up with driver three core flexible copper conductor cases of suitable size complete. Note:- Contractor shall submit 2 year warranty of material from manufracturer alongwith purchase voucher.

om enterprises (BID ID -3495400)