8562/E8

Amount

Excavation in trenches in hard dense soil not exceeding 1.5 metre width and not exc 1.5 metre deep for laying of pipe line and getting out all as specified and directed.

Excavation in trenches n. exc. 1.5 mtr in wide and n. exc. 1.5 mtr in depth for laying of underground cable and getting out in soft rock complete all as specified and directed.

Returning, filling in including spreading levelling watering and well ramming in layers not exceeding 25 cm thick in soil all as specified and directed.

Removing surplus soil to a distance nexc. 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point all as specified and directed.

S&F 32 mm bore GI tubing medium grade with all fittings and fixtures laid in trenches all as specified and directed. Make : Jindal/Tata/Prakash Surya.

S&F of 25 mm bore GI tubing medium grade with all fittings, laid in trenches all as specified and directed. Make : Jindal/Tata/Prakash Surya.

S&F 20 mm bore GI tubing medium grade with all fittings, laid in trenches, including all accesories required for completion of work all as specified and directed. Make : Jindal/Tata/Prakash Surya.

S&F 15 mm bore GI tubing medium grade with all fittings, laid in trenches, including all accesories required for completion of work all as specified and directed. Make : Jindal/Tata/Prakash Surya.

M&L cutting and screwing existing steel tubing of size 50 mm dia for addition/altration of or lenthening screw of pipe to from connector and down in positions or without taking down all as specified and directed

Supply and Install Gun metal gate valve with iron wheel screwed both ends for iron pipe and fixed of size 20 mm all as specified and as directed. Make:-

Supply and Install Gun metal gate valve with iron wheel screwed both end for iron pipe and fixed of size 15 mm all as specified and as directed. Make:-

Supply and fix of rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position with all accessaries such as inlet, outlet, over flow connections, ball/flote valve all as specified and directed Make:-

Supply and fix of rotational moulded polyethylene water storage tanks of capacity 250 ltrs (cylindrical vertical with closed top) hoisted and fixed in position with all accessaries such as inlet, outlet, over flow connections, ball/flote valve all as specified and directed

M&L brick masonry chamber (valve pit) for opening and closing valve with internal dimensions of size 900x900x900mm built in CM 1:4 and plastering 15 mm thick in CM 1:4 internally and externally upto 15 cm below GL including necessary excavation and earth work in any type of soil/strata including fixing MS sheet cover 6 mm thick over angle iron frame of size 25x25x6mm including locking arrangement and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and directed.

Material and labour point wiring with 1.5 Sq mm PVC insulated unsheathed single core stranded copper conductor FRLS cable 1100 Volts grade, drawn through and including 19/20 mm size PVC conduit, along with 1.5 Sq mm continuous PVC insulated unsheathed stranded copper conductor cable for earth continuity wire, connected to earth dolly and to be terminated in pressed steel sunken boxes (having wall thickness not less than 1.22 mm for boxes upto a size of 200 mm x 300 mm and beyond that the wall thickness shall be not be less than 1.63 mm), concealed type, covered with 3.0 mm thick bakelite sheet for mounting switches, sockets, fan regulators etc including testing on completion complete all as specified and as directed One socket outlet 5 pin 5/6 Amps on independent board controlled by one, one way switch. Make of Cable:- Make of Conduit:-

M&L for point wiring in PVC conduit or conceled in some places as per required at site of size confirming to IS 2079-1973 medium grade on surface with PVC insulated unsheathed multistranded copper conductor cable (FRLS) 1.5 sqmm nominal cross sectional area 1100 volts grade complete with all fittings such as Elbow, Tee, bends, junction boxes, saddles including PVC board (ISI Marked) and screws and rawal plug etc including 1.5 sqmm PVC insulated & unsheathed copper conductor cable as earth wire and connected to light/fan & common earth dolly with necessary copper thimbels all as specified and directed by the Engr-in-charge for One light/fan/bell point controlled by one ,one way switch with cable 1.5 sqmm size.

All as per item No 16 above but one socket outlet 3 pin 5/6 Amps on independent board controlled by one, one way switch.

All as per item No 16 above but One socket outlet 5 pin 5/6 Amps on same board with other one, one way switch.

M&L point wiring in PVC conduit conceled as required at site of size confirming to IS 2079-1973 medium grade with PVC insulated unsheathed multistranded copper conductor cable (FR) 2.5 sqmm nominal cross sectional area 1100 volts grade complete with all fittings such as elbow, bends, junction boxes, saddles including PVC board (ISI Mark) and screws and rawal plug etc including 1.5 sqmm PVC insulated & unsheathed copper conductor cable as earth wire and connected to light/fan & common earth dolly with necessary copper thimbels for 15 amp socket point all as specified and directed.

All as per item No 19 above but for socket out let, 15/16 Amps on independent board with 4 Sqmm size cable and 2.5 Sqmm for continuty earth wire connected to common earth dully all as specified and directed.

Supply and fixing switch piano flush type, single pole one way 5 Amps 230 volts all as specified and as directed. Make :- PLAZA/ANCHOR/ Havells

S&F switch piano flush type 15/16 Amps single pole one way all as specified and directed.

M&L for ceiling rose 2/3 terminals 65x25 mm dia poly carbonate isolatedall as specified and directed.

S&F lamp holder,PVC/Polycarbonate type with back plate suitable for batten fittings all as specified and directed.

Supply and fixing socket out let 3 pin 5/6 Amps all as specified and as directed. Make :- PLAZA/ANCHOR/Havells

M&L for socket out let 5/3 pin 15/16 Amps complete all as specified and directed.

M&L for Switch socket combination 5A/16A, 5 in 1 flush type all as specified and directed. Make -Havells /Anchor / Legrand / HPL.

Supply and fixing MCB SP 6 Amp to 32 Amps 240 volt 10 KA all as specified and directed. Make :- Havells/HPL/Legrand/ABB

S&F 9 Watt LED bulb. cool day light, 230/240V AC supply all as specified and directed. Make -Surya/philips, CG,Havells, syska.

S & F surface and wall mounted LED tube light fitting with polycarbonate housing & interated electronic driver with tube rod of 18 watt slim elegant design HSN Code 9405 case lot No 25 and including connected with 3 core 23/0.0076 insulated copper wire from celing rose to fittting connector all as specified and directed. Make:- Havells, CG, Philips, Bajaj.

Supply and fixing wall mounting fans complete with all acessories 230 V, 400mm sweep, 60 CFM air flow, 90 degree swing and 1400 RPM motor speed as required at site all as specified and directed. Make :- Havells model no Dzire HS equivelant CG/Bajaj/Usha/Anchor

M & L for sub main wiring in PVC conduit/conceled of required size 2 x 1.5 Sqmm PVC insulated multistrand copper conductor with 1x1.0 Sqmm PVC insulated multistrand copper conductor as earth continuity wire all as specified and directed. Note:- For the purpose of payment two runs of 1.5sqmm conductors and one run of 1.0 sqmm conductor with casing caping will be measured as one length.

M&L sub main wiring in PVC conduit/conceled of required size 2 x 4 sqmm PVC insulated multistrand copper conductor with 01x2.5 sqmm PVC insulated multistrand copper conductor as earth continuity wire all as specified and directed. Note:- For the purpose of payment two runs of 4sqmm conductors and one run of 2.5 sqmm conductor with conduit will be measured as one length.

M&L of sub main wiring in PVC concealed conduit of required size 2x6 sqmm PVC insulated multistranded copper conductor with 01x4 Sqmm PVC insulated multistrand copper conductor as earth continuity wire all as specified and directed. Note:- For the purpose of payment two runs of 6 sqmm conductors and one run of 4sqmm conductor with conduit will be measured as one length.

Supply, installation, testing & commissioning of reverse Osmosis plant of output capacity 50 LPH with foundation for RO Plant, softner, feed water, characterestics Turbidity < 5ppm, iron <0.3 ppm, Ph range 6.5-7.2, total hardness <500 ppm, TDS <1500 ppm including two set of filters inner plant & additional prefilter set -02 Nos all connected accessories, tool set -01 Nos, bib tap stainless steel -01 Nos etc all as specifed and directed . Note : Rate quoted by contractor to be included for accessories required for smooth functiontion of RO purifier

M&L for earthing complete with galvanished steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5m below normal ground level connected to and including GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6) type C-1 earthing chamber, pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate, reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm, funnel with GI watering pipe of 20 mm bore medium grade, wire mesh and lugs, GI protection pipe of 15 mm bore light grade up to 7.5 metre long, etc complete all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 mtr will be measured and paid separately

M&L for earthing complete with using galvanized mild steel earth plate (electrode) 600 mmx 600 mmx 6.00 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 32X6 mm GI earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead incased in and including 50 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg)duly reinforced with mild steel round bars 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handles with and including necessary excavation & earth work including laying the GI pipe concealed in floor /wall all as per plate No. 3 of SSR Part I complete all as specified and directed and testing on completion. Note :- (i) GI earth wire and protection pipe beyond 7.5 mtr will be measured and paid separately.

Supply , installed, testing and commissioning of UPS EB 800VA Inverter, AC 230 volts, 50 Hz with stand for battery including all connection and standard accessories all as specified and directed .

Supply and installed , testing and commissioning of Tubular battery 12 volt, 150 Ah, standard size, multi color with suitable stand including all accessories all as specified and directed.

Taking down carefully copper/aluminium point wiring (light fan socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fitting etc. removing materials from site and keeping in safe custudy for taking as sch of credit(credit for above items should be made as per conditions separately) and depositing to MES store yard and making good to the disturbed surface of walls, floors roof etc all as specified and directed

Dismantling and taking down of unserviceable old existing submain wire of any size all as specified and directed

Dismantling and taking down of unserviceable old existing XLPE/ Service cable of any size all as specified and directed

Dismantling and taking down of unserviceable distribution boards all as specified and directed.

M&L for sand cushioning for protection of PVC cable with approved sand of uniform thickness, laid dry, by filling in trenches and punning to proper required cover all as specified and directed

Supply and laying of old size sub-class ’B’ bricks laid flat length equal to width of bricks, perpendicular to UG cable over the dry sand cushioning, for cable protection all as specified and directed

M&L for 32 mm dia steel tubes (light grade) galvanised iron with all fittings, laid in trenches/wall/pole for protection of underground cable when crossing the road/fixing as in repair. (MAKE: JINDAL/ PRAKASH/SURYA)

Supply and lay in trenches, fixed to wall/pole UG Cable XLPE insulated screened PVC beded galvanised steel strip or wire armed heavy duty electric cable with multi stranded Aluminium conductor , 1100V grade of size 10 sqmm 4 core all as specified and directed.

S&F in replacement building security light fitting complete with 25 watt LED type pressure die cast aluminium housing and heat resistant toughened glass with frame protection and better optics for uniform distribution etc complete fixed bracket made out by GI pipe (light grade) of suitable size and MS clamp and nut bolts washers etc complete and connected with twin core cable 1.5 sqmm from ceiling rose to fittings connector all as specified and directed (Item HSN code 9405, Item Name : Road Lighting Fixture Model :ENDURAPEARLSL 25 W LED 757SASYTOPCMPC IP 66 Make : Havells/Philips/Bajaj

S&F in replacement of MCB DB SPN, 8 way 240 volt , double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete with blanking plate all as specified and directed.

Supply and fixing MCB single pole with thermal over load as well as magnetic short circuit tripping device with quick , break trip free mechanism , robust design and terminals having heat resistance moulding suitable for single phase circuit of 6 to 40 Amps all as specified and directed.

All as per item No 52 above but MCB DP 63 Amps .

M&L PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) in foundation filling and mass concrete including demolition of existing cement concrete all as specified and as directed

Supply, laying, testing and commissioning of cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminum conductor of size 70 sqmm 3.5 core in replacement all as specified and directed.

All as per Item No 55 here-in-before but of size 16 Sqmm 4 core

All as per Item No 55 here-in-before but of size 10 Sqmm 4 core

Supply and fix in replacement of light grade Galvanised mild steel pipe 80mm bore complete with all fittings, laid under roads, drain, paths, fixed to poles/ walls with suitable mild steel clamps, bolts, nuts and washers all as specified and directed for cable protection. (Note:- Excavation & earth work shall be measured and paid for separately under appropriate item of this schedule )

All as per Item No 58 here-in-before but of size 40 mm bore

M&L in replacement for earthing complete with using galvanized mild steel earth plate (electrode) 600 mmx 600 mmx 6.30 mm thick buried directly in ground, earth pit not less than 2.25 mtr deep below ground level with top edge of the earth plate not less than 1.50 m below ground level and earth plate surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all round the plate using 32X6 mm GI earth strip as earth lead moulded and riveted to earth plate at one end and connected to main equipment at switch/control board at another end, GI earth lead incased in and including 50 mm dia GI ‘light grade’ pipe from upper end of earth plate upto equipment with & including 20 mm dia bore GI pipe ‘light grade’ as water pipe from earth chamber to upper edge of the earth plate, GI funnel with wire mesh fixed on water pipe and provision of PCC 1:2:4 type B1(using 20 mm graded stone agg) as in pits chamber and RCC pit cover 50 mm thick of precast RCC 1:2:4 type B-1 (using 20 mm graded stone agg)duly reinforced with mild steel round bars 6 mm dia @ 150 mm c/c both ways with 10 mm dia mild steel bars as in lifting handles with and including necessary excavation & earth work including laying the GI pipe concealed in floor /wall all as per plate No. 3 of SSR Part I complete all as specified and directed and testing on completion. Note :- (i) GI earth wire and protection pipe beyond 7.5 mtr will be measured and paid separately. (ii) If the desired earth resistance is not found earthing shall be re-done by the Contractor at no extra cost paid by Dept.

M&L in replacement for earthing complete with galvanished steel earth plate electrode size 600X600X6mm thick burried directly in ground vertically to a depth not less than 2.25m below normal ground level with top edge of earth plate not less than 1.5m below normal ground level connected to and incl GI earth lead wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanised iron and connected to test point all as shown in electrical plate No 3 of SSR part I-2009 and as specified or indicated and testing on completion including excavation and earth work in any type of strata available at site, PCC (1:3:6)type C-1 earthing chamber ,pre cast RCC slab 50 mm thick in cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate reinforced with welded steel wire fabric (XPM) weight not less than 4 kg/sqm funnel with GI watering pipe of 20 mm bore medium grade ,wire mesh and lugs ,GI protection pipe of 15 mm bore light grade up to 7.5 mtr long ,etc complete all as specified and directed. NOTE :- GI earth wire and protection pipe beyond 7.5 mtr will be measured and paid separately

Amit Engineering

SEEMA ELECTRICAL

VAIBHAV ENTERPRISES