Karnataka

Active

Works

Buildings

Construction of AEE Quarters in Kudachi GLBC colony

Karnataka Neeravari Nigam Limited

KNNL Division GLBC Div No 1 Ghataprabha | Karnataka

Amount: ₹42.2 LCloses: 25 Jun 20263d left

Tender Value

₹42.2 L

EMD Value

₹84,500

Closing Date

25 Jun 2026, 11:00 pm3d left

Similar Past Results

Similar tender results from the same govt authority in the past 3 years.

Tender Inviting Organisation

Name

Karnataka Neeravari Nigam Limited

Work Description

Construction of AEE Quarters in Kudachi GLBC colony

Tender Information

Tender ID

307342

Reference Number

KNNL/2026-27/BD/WORK_INDENT4577

Tender Type

Open

Product Category

Buildings

Location

KNNL Division GLBC Div No 1 Ghataprabha

Source Website

Subscribe to view

Documents Required

11 documents required · 10 mandatory · 1 optional

Technical Bid

RequiredRegistration Certificate issued from KPWD Class - III & Above

Requiredvalid GST Registration Certificate

RequiredValid EPF Registration Certificate

RequiredEPF Paid challan up to May-2026

Requiredturnover Certificate

RequiredAvailable tender capacity

RequiredPostal Address & Scanned Signature of the Bidder.

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26.Achieved in at least Two financial years an average annual financial turnover of Rs. 42.23 Lakhs. Chartered Accountant should have a UDIN Generated through the ICAI Portal. Any such certificates without UDIN should not be considered and should be treated as an invalid document.

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26. Satisfactory completed at least 90 percent of the contract value as a prime contractor, at least one similar work such as Construction/ Improvements to Buildings of value not less than Rs. 21.12 Lakhs. Updated to the FY in which the tenders are invited.

RequiredITR return filed Copy 2025-26. Assessment year 2026-27.

OptionalThe intending bidders are advised to visit the site of work, make themselves familiar with local situation about the availability of construction materials, work men, land required for construction activities

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)

Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

Proposals for subcontracting components of works amounting to more than 20% of the contract price (for each, the qualifications and experience of the identified sub-contractor in the relevant fields should be attached)

As per Karnataka State Government order No.LD/300/LET/2006 Bangalore Dated 01.01.2007 and Government Letter No.PW/134/BMS/2007 Dated 27-07-2007, a sum amounting to 1%of the bill amount will be deducted towards Construction Labour Welfare fund.

The royalty charges will be recovered as per the govt. Orders issued from time to time

Conditional tenders liable for rejection.

Financial Year will be reckoned as the period between first day of April and Thirty first day of March of succeeding year (both days inclusive).

The intending bidders are advised to visit the site of work, make themselves familiar with local situation about the availability of construction materials, work men, land required for construction activities, etc.

If any of the dates mentioned above happen to be a general holiday, the next working day holds good

Any change / extensions, etc in the tender schedule (calendar of events) will not be published / advertised through news papers changes will be updated on/in e-procurement portal only

The intending bidders should note that, if any of lands either in part/ parts or in whole required for the work is not acquired by the Nigam, it shall be the responsibility of the bidder to take the possession of such land and start the work by obtaining consent of the land owners before commencement of work at no extra cost to the Nigam and no claim / delays whatsoever relating to on account of non-availability of land would be entertained

If the percentage quoted by the contractor for the work is below ninety percent of the estimated amount put to tender or recast amount put to tender of the department, then the contractor shall furnish an additional performance security in the form of Bank Guarantee for an amount equivalent to the difference between the cost as per quoted percentage and 90% of the estimated amount put to tender or recast amount put to tender. In case of contractor quotation rates above 125% of the estimated rates then the amount over and above 125% will be withheld during the progress of work. The additional performance security will be released proportionately to the bill amount till the contractor achieves progress of the entire cost of the work as per the agreement. If BG submitted while issuing fresh BG or extending any existing BG claim period of a minimum one year from date of expiry of validity period of BG is to specified invariably.

Typographical errors, if any, will not be the ground for any claims by the Bidder/ Firm/ Company.

Amount put to the tender is exclusive of GST. GST will be paid at applicable rates at the time of payment of RA Bills. The increase in GST shall not be paid in the extended period of contract for which the contractor is responsible. Hence, the contractor should quote the rates excluding GST

The officer competent to accept the tender shall have the right reject any or all the tenders without assigning any reason whatsoever.

The time stipulated for completion of work is 5 calendar months.

The defect liability period for the work is 12 (Twelve) calendar months.

Constitution or legal status of Tenderer : Bidder should upload valid KPWD Class - III and above Registration Certificate

Bidder should upload valid GST Registration Certificate

Bidder should upload Valid Employees Provident Fund Registration Certificate along with EPF paid challen for the month previous to the month in which tender is invited May-2026

Tenderer shall note that the Tenders of those found Eligible as mentioned in Clause 3 - Qualification of the Tenderer in Section 2: Instructions to Tenderers (ITT), will only be considered for evaluation.

The tenderer shall furnish required information in all formats. Scan and upload all Formats/Original documents required for this bid to the e-procurement portal. The Original Formats/Documents shall be produced at the time of opening of l Bid for physical verification.

Financial turnover preivious years, and existing commitments / on going works shall be given a weightage of 10 % per year to bring them to the price level of the 2025-26.

Income Tax PAN card and Income Tax returns filed for the Financial year 2025-26 (Assessment year 2026-27).

All Tenderers shall provide the requisite information accurately and in sufficient detail in Section 3: tender and Qualification information. To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26. (a) Achieved in at least Two financial years an average annual financial turnover of Rs.42.23 Lakhs. Updated to the FY in which the tenders are invited. Financial turn over of previous years shall be given a weight of 10% (say) per year to bring them to the price level of the FY in which the tenders are invited. Chartered Accountant should have a UDIN Generated through the ICAI Portal. Any such certificates without UDIN should not be considered and should be treated as an invalid document.

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22 to 2025-26. Satisfactory completed (at least 90 % of the contract value) as a prime contractor, at least one similar work such as Construction/ Improvements to Buildings of value not less than Rs. 21.18 Lakhs. Updated to the FY in which the tenders are invited. The value of the completed works shall be given a weight of 10% per year to bring them to the price level of the FY in which the tenders are invited.

Postal Address & Scanned Signature of the Bidder.

The Conditions of the contract, Bid Document, Designs and Specifications are published specifically for each works separately in KPP Portal as per Standard Tender document

As per as Royalty charges is concerned, contractor should submit MDPs for each material issued from Mines and geology Department, GOK. Otherwise Penalty charges will be recovered as per Nigam circular No. 8708 dated: 26.12.2023

Fee & Financial Details

Tender Fee Amount

₹1,060

EMD Fee Amount

₹84,500

Important Dates

Last Activity

18 Jun 2026

Published

18 Jun 2026

Download Ends

24 Jun 2026

BOQ Preview

•

Construction of AEE Quarters in Kudachi GLBC colony

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, cau...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS C...

•

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

•

Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement complete as per drawing and technical specification.

•

Providing and laying in position Cement Concrete for all foundation work. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid...

•

Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, bas...

•

Providing Size Stone masonry with hard stone in foundation & plinth with Cement mortar 1:6 (1 cement : 6 coarse sand)

•

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification I.S. 3620/1979 having compressive strength not less than ...

•

Providing Half brick masonry with common burnt clay Non Modular bricks of class designation 3.5 in superstructure above plinth level up to floor 1 level cement mortar 1:3 (1 cement :3 coarse sand) i...

•

Providing 12 mm cement plaster with cement mortar 1:6 (1 cement: 6 fine sand) including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost ...

•

Providing 20 mm cement plaster of mix :1:6 (1 cement: 6 fine sand) to brick/stone masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, inclu...

•

Providing and fixing Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of ...

•

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to open...

•

Ceramic Cool Tiles for Roof. Providing and fixing Ceramic Cool tiles of size 254x254x15mm thickness thermal insulation properties as per GRIHA guidelines with satisfactory SRI greater than 70% & R va...

•

Providing & fixing flat iron brackets 50x3 mm size with necessary bolts, nuts and washers etc. for fixing G.S. sheets gutters with purlins.

•

Providing and fixing 15 cm wide, 45 cm overall semi-circular plain G.S. sheet gutter with iron brackets 40x3mm size, bolts, nuts and washers etc., including making necessary connections with rain wate...

•

Supply and Installation of Multicell Standing Seam polycarbonate panels having flux 7.0 as per EN 16153 & EN ISO 10077-2. For min joints, panel shall be 1000 - 1200 mm wide with standing seam on both...

•

Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately) : 12 mm thick

•

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth co...

•

Providing Honne wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and si...

•

Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden fram...

•

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Clerestory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspensio...

•

Providing and fixing factory made Green certified, Anti Termite, UV resistant, high water absorbant single extruded WPC (Wood PolymerComposite) solid plain flush door shutter of required size comprisi...

•

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Two coats applied on walls @ 1.25 L/10 m² over and including one coat of...

•

Painting wood work with Deluxe Multi Surface Paint of required shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @0.75 L/10 m² of approved brand and manufacture to ...

•

Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two coat applied @ 0.90L/10 m² over an under coat of primer applied @ 0.80 L/10 m² of approved brand and manufa...

•

Providing & fixing of 3-track x 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastom...

•

Providing and fixing chromium plated brass curtain rod with ISI mark hav ing wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., whereve...

•

Providing and fixing Stainless Steel Fixtures conforming to 304 graded steel as per direction of engineer in charge-SS Handles 300mm-1,SS Aldrop 16mm dia, 200mm-1,SS Tower Bolts 200x10mm-2,SS Door sto...

•

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 m...

•

Providing and laying vitrified floor tiles with thickness 9-10 mm in different sizes with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours ...

•

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, e...

•

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed t...

•

Providing and fixing 18 mm thick gang saw cut granite of any color and shade, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and ...

•

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle gre...

•

Providing and fixing factory made solid Foam uPVC profile for kitchen cabinet frame (45 x 20 mm) of approved shade, quality and make. The profile shall be laminated on both sides, made from rigid foam...

•

Providing and fixing factory made Kitchen Cabinet Shutter/Partition 20 mm nominal thickness of approved shade, quality and make, made from rigid foam sheets (Single extruded) having density 600 kg/m3 ...

•

Providing and laying Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and...

•

Providing & fixing upvc ventilator with Exhaust Turbo speed fan with 5 blades (300mm x 300 mm & above sized fan) with copper motor having mounting arrangements as per direction of Engineer in charge ...

•

Providing Flush/ Ruled pointing: Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) after raking joints to depth nicely lining, including cost of materials, labour, curing as per s...

•

Wall polishing on masonry or concrete walls with wax polish of approved brand and manufacture to give an even surface including preparing the surface after thoroughly brooming the surface to remove al...

•

Providing and fixing PTMT bib cock of approved quality and colour. 15 mm nominal bore, 165 mm long, weighing not less than 110 g

•

Providing and fixing Single lever sink cock (Lifting type cold water cartridge) with swivel spout and wall flange made of Stainless steel with all concealed fitting arrangements & all necessary acces...

•

Providing and fixing PTMT grating of approved quality and colour.Rectangular type with openable circular lid

•

Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes...

•

Providing and fixing Unplasticised Polyvinyl Chloride (uPVC) pipes, for cold water supply including all uPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step ...

•

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including PVC (S.W.R) drain pipe 100 mm diameter and 1.20 m long complete as per standard design

•

Providing and fixing Sewer (SWR) pipes, including all fittings, This includes jointing of pipes & fittings with one step solvent cement, trenching, refilling & testing of joints complete as per dire...

•

Providing and fixing Double Towel rail 600mm length made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy

•

Providing and fixing Robe hook with 5 points made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy

•

Providing and fixing Wall Mixer Non Telephonic made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Economy

•

Providing and fixing Overhead rain showers of minimum dimension 225x225mm & wall flange made of Stainless steel with all concealed fitting arrangements & all necessary accesories complete - Class Econ...

•

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cist...

•

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making go...

•

Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the wal...

•

Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I....

•

RCC hume pipe Circular pump house: Providing precast RCC Circular Hume pipe pump house with M.S door and RCC conical roof as per specification and drawings - Internal dia Mtr. 1200 mm & height of 2....

•

Erection and positioning of RCC Hume pipe pump house/Cistern on size stone masory platform including transportation charges and handling,finishing with all necessary tools ,plants and materials etc.,c...

•

Supplying and fixing of PVC casing and capping on the wall or ceiling using necessary materials like bends, junction box, elbows, screwsat an interval of 300 mm as required 25 mm

•

Supplying PVC flexible conduit pipe 20mm dia fixing on surface over inverted tapered wooden plugs orphill plugs o rrawl plugs and clamped using heavy gauge saddles at an interval of 300mm using NF scr...

•

Supplying heavy gauge PVC conduit pipe 25mm dia 2mm thick confirming toIS2509 with suitable size bends,metal/PVC Junction boxes,adhesive pasteetc.,and running before concreting the slab. The conduit s...

•

Supplying and wiring adopting loop system in existing PVC Conduit /casing capping using 2x1.5Sqmm (Phase & Neutral) & 1x1.0 sqmm (Earth wire) FRL Smultistrand PVC insulated copper wire (confirming toI...

•

Wiring for lighting/power circuit using one of FRL SPVC insulated 1100V grade, multi strand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...

•

Supplying and fixing superior quality modular switch mounting polycarbonate plat ewith necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

•

Supplying and fixing of modular switch&connected accessories on existing modular switch plate as per IS 3854 and IS 1293. Stepped Fan Regulator Two Module

•

Supplying and fixing of modular switch&connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A Bell Push

•

Supplying and fixing of modular switch&connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6/16A Universal Socket

•

Supplying and fixing of modular switch&connected accessories on existing modular switch plate as per IS 3854 and IS 1293. 6A One Way Switch

•

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box.

•

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers. 32 A

•

Supplying and fixing HRC fuse units base on existing switch /panel board. 32 to 63 A

•

Supplying of Ceiling Fan with Capacitor rating As per guide line of BEE5star rating and IS:374/19 and also comply with IS:1709/1984 with latest amendment, Rated voltage 220V/50Hz, Rated power upto 35W...

•

Fixing a ceiling/ Wall mounting fan of all capacities and all types to theexisting 'S'' hook with fan regulator to the existing board together with supplying and fixing 5A. ceiling rose, necessary len...

•

Supplying of recess mounting non integrated type LED down light 15 to 18W luminaire comprising of pressure decast/ extruded aluminium housing, with spring loaded false ceiling clamps, LED of Power/COB...

•

Supply of LED Street light luminaire with pressure die cast aluminium housing body for optimal thermal dissipation.Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyc...

•

Gas pipe line: Cu ETP Straight copper tubes of diameter 8mm

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Specification for water supply sanitation.pdf

Others - Specification for water supply& sanitation • 4.02 MB

1 Tender Notification.pdf

Others - Tender Notification • 0.48 MB

3 Specification for construction of Buildings-Civil works.pdf

Others - Specification for construction of Buildings-Civil works • 3.50 MB

Circular.pdf

Others - Circulars • 34.42 MB

6 Drawing Building.pdf

Others - Drawing Building • 0.59 MB

Bid documents_4577.pdf

Tender Document • 0.71 MB

5 specification_electrical_works_.pdf

Others - specification electrical works • 4.88 MB

Ready to Participate?

Download all tender documents and submit your bid