CERTAIN REPAIR TO COMPOUND WALL, SECURITY FENCING IN ZONE II TO ZONE VIII AT TBRL RANGE RAMGARH

Amount

Dismantling of mild steel work as in angle iron frames/grills mild steel bars/ fencing post etc complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified.

Dismantling of GI barbed wire fencings fixed in RCC/Steel fencing posts complete all as specified and directed.

Dismantling of brick work built in cement mortar of any specification and in any position complete all as specified and directed.

Taking down cement plaster of any description racking out joints hacking for key scrubbing down with water etc to receive plaster complete all as specified.

Material and labour for brick work with sub class 'B' old size bricks built in CM (1:6) all as specified.

All as per serial item No 6.00 but except bricks

Cleaning of bricks/cement mortar from bricks and rubbish off the premises stacking for measurement including all handling etc as directed.

Material and labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate to embedding the fencing post / struts complete all as specified.

Supply and fixing for mild steel work as in grill, framed guard bars and similar work conforming to Fe-290 Grade E-165 including welding if required etc, complete all as specified.

All as per item No 10 above but fixing only angle iron frames/grills, mild steel bars obtained from dismantling

Supply and fixing for mild steel work as in posts/struts in fencing including cutting, tops to shape as directed, drilling holes notching for wire etc, complete conforming toFe-290 Grade E-165 complete all as specified.

Supply and fixing for framed work as in doors or gates of angle or other section conforming to Fe-410-W (Gde E-250 quality-B).

Material and labour for precast cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate for Jallies 25mm thick set in cement mortar 1:4 including all moulding frame all as specified and as directed.

Supply and fixing for GI 2 standed barbed wire2.24mm dia wire with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts including securing or tying at crossing with and provision of galvanised mild steel wire. staples or steel pins etc as directed (Each line wire to be measured) complete all as specified.

All as per serial item No 15.00 above but except barbed wire

All as per serial item No 15.00 above but Restraining, resecuring including making good staples only.

Supply and fixing for MS round bars and flat iron and similar small articles conforming to Fe 410-0 or Fe 310-0, for fixing of chainlink fencing complete all as specified.

Material and labour for 75mm thick PCC 1:4:8 type D-2 using 40mm stone aggregate as in sub base floor/floors and paving etc.

Material and labour Sand filling under floors or in foundations including watering and consolidation

Material and labour for Machine pressed coloured precast inter locking paver block any shape and size, with grey cement and pigment confirming to IS 15658-2006 of 60mm thickness, M-35 Grade complete all as specified and as directed.

Material and labour preparation of old concrete surfaces of any description, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Supply and fixing in repairs for concertina coil 2.64mm dia having a core wire high carbon spacing steel of high tensile strength as per grade of IS-4454 (Pt-I) with a low carbon steel strip punched tape 19mm wide, 0.5mm thick and series of knife edge sharp barbs/blades @ 25mm centre to centre punched all along the length on both the sides of strips at regular interval confirming to IS-513 complete all as specified and as directed.

All as per serial item No 23.00 above but restraining, resecuring including making good.

Site clearance incl. removing of vegetation growth, bushes including taking out from fencings etc. and removing the rubbish n exc. 50m as specified and as directed by Engr-in- charge. (Measurement shall be taken of ground area cleaned)

Material and labour for 12mm thick rendering on fair faces of brick wall or concrete surface in CM 1:6, surfaces finished even and fair with out using extra cement on walls, all as specified.

Material and labour for roughcast finish over 10mm thick plaster in cement mortar 1:3 as specified in SSR Pt-I Clause14.22 in pattern and stage complete all as specified.

Material and labour for cement concrete (1:2:4), type B-1, using 20mm graded mechanically crushed stone aggregate as in coping, bed block benching, kerbs, mud stop, rounded or chamferred on edges including necessary form work/moulds complete all as specified and directed.

Material and labour preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Material and labour preparation of old painted steel surfaces of any description, not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Preparation of new plastered surface and applying two coats of cement base paint over a coat of white wash etc complete all as specified and directed.

Material and labour complete removal of existing treatment by washing, rubbing down & stoping of Cement Base Paint and applying two coats of cement base paint complete all as specified and directed.

Material and labour preparation of old plastered surfaces of walls applying one coat of cement base paint of approved make and colour including cutting of bushes etc. complete all as specified.

ALPHA ENGINEERS AND BUILDERS

Arun enterprises

M/s Krishan Aggarwal

D.N.Gupta and Sons

N.N.CONSTRUCTION

KUKREJA ENGINEERS