REPAIR TO DOOR/ WINDOWS AND OTHER JOINERY AT DARJIPURA AT AFS BARODA

Amount

Taking down chowkats or frames with shutters (without taking off shutter from the frame) area exc 1.5 Sqm and n exc 4.0 Sqm each complete all as speified and as directed.

Taking down chowkats or frames with shutters (without taking off shutter from the frame) area not exc 1.50 Sqm each complete all as speified and as directed.

Taking down shutter only of any description area exc 1Sqm but n. exc 2 .0 Sqm complete all as speified and directed.

Taking down shutter only of any description area not exc 1Sqm each complete all as speified and directed.

Taking down Shutter exc 1 sqm but n exc 2 sqm each and refixing in the same opening incl all necessary bolts, screws etc. complete all as specified and directed

Repair to Wooden door, Pannelled doors by removing and refixing broken/damaged styles, top, bottom, lock rails and making good by application of necessary synthetic enamelled paint over a coat of primer complete all as specified and direcetd.

S&F Plain, solid, straight chowkats and frames of second class hard wood, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F Pressed steel door frames(105 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L Pressed steel frames(125 X 60) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

M&L for providing cement concrete type B-0, 1:2:4 using 12.5mm graded stone aggregate to fill the Steel frame complete all as specified and directed.

S&F 2nd class hard wood factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both face.The size of rail and style as per IS:1003(Part-I), klin seasoned and chemically pressed treated complete all as Specified and directed.

S&F 35mm thick 2nd class hardwood glazed and skeleton shutter open rebeted and prepared to receive glass gauze etc (without shash bar ) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing, glass, gauge etc size of member of shutter as specified in SSR Part-I section 8,clause 8.24(a) supplyed and fitted to chowkats complete all as specified and directed.

S&F Factory made flush shutters 35mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water / moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/ SS dash fasteners of required dia and length complete as specified and directed.

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specifications & drawings complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.

Supply and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminte shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame, complete as specified and directed.

Supply and fixing to existing door frames 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing, complete all as specified and directed.

M&L Factory made flush shutters 25mm thick solid core construction, with block board core and plywood face panels, commercial type on both sides as in CB shutter complete all as specified and directed..

S&F 75mm long SS butt hinges and fixed to frame with screws or welding complete all as specified and directed.

S&F for 100mm long butt hinges, medium weight , cold rolled mild steel and fixed complete all as specified and directed.

S&F for 200mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F for 150mm long aluminium anodized barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 300mm complete all as specified and directed.

S&F aluminium alloy anodized sliding door bolt with haps and staple (bolt type) and fixing clip of sheet cast or extruted section or cast aluminium alloy and fixed length of bolt 250mm complete all as specified and directed.

S&F 150mm long aluminium handles cast type anodized complete all as specified and directed.

S&F 100mm long aluminium handles cast type anodized complete all as specified and directed.

S&F Hasp and staple, safety type aluminium anodized including bolt to hinge plate and fixed with screws 100 mm size complete all as specified and directed.

S&F door stopper of aluminum alloy body and tongue double legged anodized with hard drawn steel spring over all length of cover plate 150mm fixed in floor complete all as specified and directed.

S&F in repair 18/19 mm thick pre laminated particle board (ISI Marked) exterior grade, laminated both side fixed with screws to timber work in cupboard, cupboard shutter etc. complete all as specified and directed.

S&F in repair 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.

S&F in repair 25 mm dia SS Curtains rods with brackets and decorative finials and fixed complete all as specified and directed.

M&L 20mm thick Granite work (table rubbed and polished) in jambs, pillars, window-cills, cooking platforms and like, fixed with adhesive or laid in neat cement slurry over and including 10mm thick screed bed in CM 1:6 including dismantling of existing granite complete all as specified and directed.

Taking down cement plaster any description on brick or stone wall/ celling including raking out joint , hacking for key, scrubbing with water etc. complete all as specified and directed.

M & L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of new surfaces of wall and applying two coats of oil bound distemper (any tint/ shade as approved by GE) over and including one coat of primer complete all as specified and directed.

S&F Powder coated aluminium frame and shutters (minimum thickness of powder coating 50 micron) for windows and ventilators etc with one or more rebates including necessary joining cleat, glazing clips, rubber packing, beading, plaster work on edges during fixing (if required) etc complete all as specified and directed.

S&F in repair Door closer hydraulically regulated, designation No. 3, Aluminium (Die Cast Body) universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed

S&F in repair Mortice lock,brass body, vertical type, size 100 mm 4 levers complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia wire and average width of aperture 1.14mm fixed in repair to wooden/ aluminium joinery complete all as specified and directed.

S&F in repair Sheet glass 4mm thick ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed.

S&F 4 mm thick tinted glass fixed to wooden/ aluminium joinery complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed.

S&F Framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings frame work or water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L Framed work (Fe 290 gde E 165) as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and uides) and hanging also fastening and fixing complete all as specified and as directed

M&L for preparing new steel surfaces of any descriotion over 10 CM width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed.

M&L Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M&L for repair of steel door/ gate incl necessary welding, replacement of hinges / hold fast and other minor items, if required to be change and made to gate smooth in function incl greasing etc and application of synthetic enamel paint as required at site complete all as specified and as directed. Note: Replacement of steel sheet / steel frame, if required, shall be measured and paid separately under respective item of BOQ.

S&F Mild steel, plain, black sheet 1.00 mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as require complete all as specified and directed

S&F mild steel hold fast etc conforming to Fe-410-0 or 310-0 complete all as specified and directed.

M&L for cutting holes in brick wall for inserting hold fast etc. built in CM of depth exc. one brick but n. exc. two brick thick wall making good dismantled portion in cement mortar in (1:3) or PCC (1:2:4) type B1 complete all as specified and directed.

M&L for post construction Anti Termite treatment at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre / hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed

Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding.

Harsh Infrastructure (BID ID -3480495)