PROVN OF CHAIN LINK FENCING AT SECT 1A THAKURBARI UNDER GE (NORTH) TEZPUR

Amount

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed.

S&F angle iron as in posts and struts in fencing incl cutting top to shape as directed, drilling holes, notching for wire etc and flat iron fillets for securing chain link fencing and similar work conforming to Fe-290 Gde E-165 all as specified and directed.

M & L for cement concrete in foundation, filling and mass concrete in M7.5(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed.

Supply only galvanized steel chain link fence fabric of mesh size 100 mm X 100 mm, made out of 4.06 mm nominal dia of mesh wire complete all as specified and as directed.

Fixing only galvanized steel chain link fence fencing including line wires any mesh, size and type to any type of standards, rails, straining bolts, etc. including provn of binding wire complete all as specified and as directed.

M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips and including welding has to be done with minimum 20 cm over lap for new and old of any height. Complete all as specified and as directed.

M&L flat iron (40x60mm) straps for securing corner posts and chain link fencing complete all as specified and as directed.

S & F mild steel screw bolts (machine made), diameter of neck 5 to 10 mm with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exceeding 5 cm long complete all as specified and as directed.

Preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge

Removing excavated material (soils) exceeding 250 m but not exceeding 500 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

S&F galvanized 2 strand, steel barbed wire, 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to nay type of standard rails straining and bolts, including, securing or tying at crossing with and provision of galvanized mild steel wire, staples or steel pins etc complete all as specified and as directed.

PARBIN SIDDIKI

M/S UDIPTA KUMAR BORAH

Raj Enterprise

M/S SHYAMAL SARMAH

M/S IMRAN ALI

M/S Bishwanath Mahato