Addn/Altn to Station Headquarter Building at 17FBSU, AF Trivandrum

Amount

Dismantling of floor/ wall tiling including cement mortar bedding (but not backing) removing of unserviceable tiles and rubbish of the premises complete all as specified and directed

M & L Vitrified coloured tiles 8 to10 mm thick (square/rectangular) area of each tile exceeding 0.36 sqm, in floors over 15mm screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd & directed.

M & L Vitrified ceramic coloured tiles 10 mm thick (square/rectangular) area of each tile exceeding 0.42 but not exceeding 1.00 sqm, in floors over 15mm screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd & directed.

M & L Non Skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors over 15mm screed bed in CM 1:6 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as spd & directed.

All as per item no 2,3,4 above but as in skirting/ dados, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10 mm thick rendering in CM 1:4 etc complete all as spd & directed.

S & F Glazed ceramic coloured tiles in vertical surface 350x250x7mm/450x350x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over rendering 10mm thick in CM 1:4 on wall to receive wall tiles complete all as specified and directed.

M/L for granite (of any type) work (table rubbed and polished) in steps ,jambs,pillars,window cills, cooking plat forms 18 to 20mm thick like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with pigments to match the shade of granite over 15mm screed bed in CM 1:6 including cutting mirror polishing and edge rounded as study table etc complete all as per specified as directed

Taking down chowkats or frames n exc 1.5 sqm each with shutters (without taking off shutter from the frames) complete all as spd & directed.

Taking down chowkats or frames exc 1.5 sqm but n exc 4.0 sqm each with shutters (without taking off shutter from the frames) complete all as spd & directed.

M&L plain fillets, square, rectangular or triangular in section, clean sawn, secured with mills or breads, 2nd class hard wood exc 3cm not exc 6 cm sectional area. complete all as spd & directed.

S& F in repair for 18/19mm thick marine grade prelaminated plywood with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in cupboard shutter /study table including teak wood beading all around the plywood complete all as specified .

S& F stainless steel auto closing hinges suitable for wardrops ,shutter etc complete all as specified and as directed.

S & F Continuous (piano) hinges brass, bright finish or electro galvanised of brass having width of flaps 40mm complete all as specified.

S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge

M & L for Aluminium Anodised powder coated of aluminium frame for doors,windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

M & L Aluminium anodised powder coated for door shutter side hung without sash bar aluminium section 0.55 kg/m including necessary jointing, glazed clip joint cleats, rubber gaskets, including aluminium fittings dead lock 4 levers, two numbers of aluminium alloy anodised tower bolts , hinges, handles etc. including fixing frame to wall members with rawl plugs complete. all as spd & directed by Engr in Charge.

M & L fixed in repair for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.

S & F sheet frosted glass 4.8 mm thick but exc 0.5 sqm in each pane and glazing with oil putty /glazing clips of any description complete all as spd & directed

Demolition of brick work or stone masonry built in cement mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles all as specified

M & L for pre-cast cement concrete block masonry with solid blocks, exc 10 cm in width and setting in CM 1:6,complete all as specified and as directed

Taking down cement plaster any description over wall and ceiling surfaces complete all as spd & directed.

M&L for Rendering 10 mm thick in CM 1:6 of block/ brick masonry, finished even and smooth without using extra cement complete all as specified and as directed

M&L for Rendering 15 mm thick in CM 1:4 of block/ brick masonry, finished even and smooth without using extra cement complete all as specified and as directed

M&L for Rendering 5 mm thick in CM 1:3 of Ceiling surfaces , finished even and smooth without using extra cement complete all as specified and as directed

M&L for preparing new plastered surface and applying two coats of oil bound distemper on walls ,including one coat of alkali resistant priming paint complete all as spd & directed.

M&L for preparing new plastered surface and applying two coats of Exterior weather coat on walls including one coat of primer complete all as spd & directed.

M&L for preparation of new surfaces of ceiling and applying three coat of white wash on Ceiling complete all as specified and directed

M&L for preparing old plastered surface of wall and complete removal of existing treatment and applying two coats of oil bound distemper including one coat of alkali resistant priming paint complete all as spd & directed.

M & L for preparation of old wall surfaces and apply one coat of weather proof anti fungal paint incl necessary scaffolding etc complete all as specified.

M&L for preparing old plastered surface and applying one coat of white wash to ceiling complete all as spd & directed.

M&L applying one coat of synthetic enamel paint on old wooden surfaces exceeding 10 cm width or girth and of wdn surface incl preparation etc all as specified and directed.

Dismantling of water tanks exc 500 ltrs and n exc 1000 ltr capacity and removing from store complete all as specified and as directed.

S & F for 1000 ltrs capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed

S & F in repair 25 mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod &high density plastic ball screwed for iron pipe and fixed .(Minimum weight 15mm-142 gms/20mm -210 gms/25mm -455 gms/40 mm-690 gms)

S&F in repair 32 mm dia PVC waste pipe 90 cm long flexible type for Wash basin complete all as spd & directed.

S & F in repair chromium plated fancy type 15 mm dia Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe/ ppr pipes or brass ferrule complete all as specified and directed

S & F pillar tap cast copper alloy with capstan head chromium plated fancy type, long body, screwed down high pressure 15mm dia bore fixed in repair. complete all as spd & directed.

S&F in replacement steel chromium plated round grating 100mm dia, fixed in position in cement mortar (1:3) complete all as specified.

S&F in repairs10 Ltrs PVC flushing cistern low level white with PVC out pipe, ball valve, float valve and handle including brackets complete all as specified and directed

S & F in repairs 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including short lengths, with all pipe fittings such as ends, elbows, unions, hose clips etc. and fixing to walls etc, complete with saddles (snap clips), wall clips, hooks, protective mild steel tube sleeves and cutting through walls, floors and their making good and also cutting, screwing and waste all as specified and directed

S & F in repairs 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including short lengths, with all pipe fittings such as ends, elbows, unions, hose clips etc. and fixing to walls etc, in walls, floors and their making good and also cutting, screwing and waste all as specified and directed

S & F in repair fancy type 15 mm dia concealed type Stop valves, chromium plated with long shank and cup screwed both ends for iron pipe or for unions and fixed. complete all as specified and directed.Make : Jaquar/CERA/Hindware or any CAM

S&F in repair fancy type 15 mm dia angle cock, cast copper alloy screwed for iron pipe & fixed complete all as specified and directed.Make : Jaquar/CERA/Hindware or any CAM

S & F in repairs brass CP mixture for mixing hot and cold water screwed down for iron pipe and fixed complete all as specified and directed.Make : Jaquar/CERA/Hindware or any CAM

S & F in repairs 125 mm size chromium plated brass shower rose with or without swivel joints and swivel arms for fixing with 15 mm dia bore pipe complete all as specified and directed.Make : Jaquar/CERA/Hindware or any CAM

S&F in repairs stainless steel sink grade 304 with drainage board made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe cast iron cantilever brackets connecting union over all size 915mmx460mm with bowl size 410mmx330mmx160mm complete all as specified and directed.Make : NIRALI/DIAMOND/BLUE STAR/SWASTIK or any CAM.

S&F in repairs health faucet, CP with flexible pipe of bore 15mm with necessary holder , screws and fasteners fitted to wall complete all as specified and directed.Make: Jaquar/Cera/Hindware or any CAM

Supply & fixed (in repair) vitreous china wash down water closet pedestal pattern (EWC) , White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and Health Faucet with pipe complete all as specified. Make: Parry wave/Cera/Hindware/Johnson

S&F in repairs Cascade type water closet with flushing cistern including seat cover and all necessity connections etc complete all as specified and as directed by Engineer-in- Charge Make: Parry wave/Cera/Hindware/Johnson

S & F in repairs, vitreous china WHB white, flat back, size 550x400mm with brackets, inc. cutting for & pinning in ends of brackets, inc. waste fitting, PTMT 32mm dia and pillar taps of PTMT 15mm dia complete all as specified and directed. Make: Parry wave/Cera/Hindware/Johnson

S & F in repairs, vitreous china bowl full stall type urinal, white with grating & union for discharge pipe, complete inc. providing & fixing plugs, bedding urinal against wall in CM 1:2, inc. 60mm long brass screws, pointing around urinal back in cement, complete all as specified and directed. Make: Parry wave/Cera/Hindware/Johnson

S&F in repairs of Toughened glass 10 mm thick as in Urinal partition and similar work including cutting to shape ,drilling holes and necessary fitting arrangement to wall complete all as specified.Make: Modiguar/Float/Saint Gobin or any CAM

Supply an Fixing in repair of CPVC pipes 16 mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified. Make: Prince/Kissan/Supreme or any CAM (All ISI)

Supply and Fixing in repair of CPVC pipes 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.Make: Prince/Kissan/Supreme or any CAM (All ISI)

S&F in repairs 20mm dia tabular towel rail brass CP `D`type , 60 cm long between flanges including one pair of brackets all as specfied.

M&L 32mm dia bore waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. With long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed as in repairs all as specified and directed.Make :Cera/Parry ware/Hindware/Jaquar or any CAM

S&F 15mm bore PVC connection pipe, 600mm long fixed as in repairs

S&F in repair 75 PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

S&F in repairs glass corner shelf 9 inch size with guards and brackets complete all as specified and directed.Make :Cera/Parry ware/Hindware/Jaquar or any CAM

S&F in repair Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed. Make :Cera/Parry ware/Hindware/Jaquar or any CAM

M&L for applying two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating on existing roof screed/plaster surface including equipment's and supervision charges in following step by (i) Roof substrate must be pressure-washed with water with, a minimum working pressure of 1,400 psi is to be used to remove all dirt, dust, chalking and waste products, complying with standard specification and as directed by the Engineer-in-Charge.

(ii) Inspect for cracks over roof screed, roof wall junction, water drain inlets/outlets if any, and clean and moisten them. Crack’s width should be wide up to 5-6 mm with mechanical cutting machine and Apply bond coat of SBR Latex in the ratio of 1:1 (URP 1: Cement 1) followed by groove should be filled with PMM by preparing Polymer modified mortar of CM 1:1 (Silica sand size ≤ 300microns) admixed with SBR Latex at a dosage of 15% of cement.(iii) Providing 300mm x 300 mm Square / rectangle upstand of M20 grade concrete or with PMM around mechanical equipment like HVAC, air-conditioning, solar panels. Etc. Apply a coat of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating allow to cure for 3-4 hours and followed by apply two coats two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating reinforced with 45 Gsm glass fiber mesh or geo textile without dilution in the interval of 4 -6 hrs. Apply Hybrid PU Sealant at around the junction of fabricated stand inserted and wall mounting mechanical fixtures.(iv) Providing Minimum 50mm thick angle fillet with CM of 1:3 admixed with SBR Latex at a dosage of 12-15% of Cement and a bond coat of SBR Latex mixed with Cement at a ratio of 1:1.

(v) Premix hybrid Polyurethane waterproof coating components A and B with an electric double paddle mixer stirrer for 2-3 minutes at a slow speed. The concrete surface must be brought into surface saturated dry condition (SSD). Providing and apply first coat of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating to the existing screed/plaster at a rate of 0.5Kg/sq.mt/coat. Place a 45-GSM glass fiber mesh or 200- 225 GSM raw mesh between the first and second coats while the first coat is still wet. Allow the first coat to dry for 3-4 hours. Apply the second and third coats of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 3-4 hours after application. Ensure that no void surface is left untreated or uncoated. All coats should be applied in directions perpendicular to each other, ensuring the correct consumption of material, resulting in a total dry film thickness of 1000 microns with system coverage in three undiluted coats at a rate of 1.50 Kg/ sq.mt/coat. Allow the system to air cure for 5-7 days minimum.

(v) Premix hybrid Polyurethane waterproof coating components A and B with an electric double paddle mixer stirrer for 2-3 minutes at a slow speed. The concrete surface must be brought into surface saturated dry condition (SSD). Providing and apply first coat of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating to the existing screed/plaster at a rate of 0.5Kg/sq.mt/coat. Place a 45-GSM glass fiber mesh or 200- 225 GSM raw mesh between the first and second coats while the first coat is still wet. Allow the first coat to dry for 3-4 hours. Apply the second and third coats of two component, cold(brush/roller) applied, UV resistant hybrid Polyurethane waterproof coating with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 3-4 hours after application. Ensure that no void surface is left untreated or uncoated. All coats should be applied in directions perpendicular to each other, ensuring the correct consumption of material, resulting in a total dry film thickness of 1000 microns with system coverage in three undiluted coats at a rate of 1.50 Kg/ sq.mt/coat. Allow the system to air cure for 5-7 days minimum. 'The material should conform to the specified technical properties:'a) Tensile Strength with Fiber ≥9N/mm2 as per ASTM D 2370 b) Elongation at break ≥ 200% as per ASTM D 2370c) Crack bridging ability ≥ 3mm as per EN 1062-7-2004(A) d) solid content ≥55% as per ASTM D 1,644-2001e) Abrasion resistance 15mg confirming to ASTM D 4060f) Shore-A 65 as per ASTM D2240 f) Shore-A 65 as per ASTM D2240 g) Tear Resistance with Fiber 40N/mm as per ASTM D 624.

Dismantling of wall and ceiling boards ( fiber pulp insulation etc ) or insulation boards / slabs, blankets any thickness including cover fillets complete all as specified and directed

M & L Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified .

M & L Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh paid separately) but to Curved surface complete all as specified and as directed.

M & L for 6mm thick WPC wall panelling colour WPC sheet inclusive of solvent cement and fixing at site including framework complete all as specified and directed. Note : Design and pattern as approved by Engr-in -Charge /GE

S & F Anodised aluminium snap grid frame work for false ceiling all as specified of grid size 605 X 605mm.complete all as specified and directed.

M & L for 8mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) all as specified and as directed.

Dismantling plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings. Complete all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI based corrugated steel 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

S & F Pre painted galvalume aluminium zinc coating GI plain steel 0.50 mm thick of any colour having tensile strength of 550 Mpa as in ridge , fixed with self tapping screws as specified and directed by Engr in Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified

S&F MS work in tubular trusses/ rafter/ purlin including special shaped washer etc complete using ERW or induction but welded tubes confirming to IS 1161-1979 Grade 240 complete all as specified and directed.

S&F framed works (Fe 410 W Gde E250,quality B) as in doors or gates of angle or other section with gusset plates ,rails, braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel ,sheeting, or other covering ,running rails and guides)and hanging also fastenings and fixing complete all as specified and directed.

M & L preparation of new or previously untreated steel surfaces, of any description over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over red oxide zinc chrome priming complete all as specified and directed.

M&L RCC type A-1 , 1:1.5:3 (using 20 mm graded aggregate ) for slab supported on walls, beams , and column in floors , desk slabs and in shelves and the line etc. All as spd and directed.

Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick, complete all as specified and directed.

M&L TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending and binding with and including annealed MS wire not less than 0.90 mm dia as required and as directed by Engineer-in charge.

Demolition Concrete in ground floors and paving's not exc 15 cm thickness (below or above ground level) complete all as specified and directed

M&L, 75mm thick PCC 1:3:6 type-C-2 in plinth protection 40mm graded aggregate with necessary form work

Taking down aluminium/Copper point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting, sunken MS boxes etc. removing materials to store for keeping in safe custody or for taking credit and making good the disturbed plaster surfaces of wall, floor, ceiling and painting 2 coat of white wash/distamber to meet the existing surface and removing materials and debris to reinstate the premise neat and clean complete all as specified and directed.

M&L for point wiring with 1.5 sqmm single core PVC insulated FRLSH cable 1100 volts grade with multistranded copper conductor drawn in and including PVC conduit and all conduit accessories concealed and including provision of 1.5 sqmm PVC insulated copper cable FRLSH ISI marked as earth continuity conductor fabricated branded Modular metal flush box concealed in walls with Modular suitable plate with cover with suitable screws for housing switches socket outlets fan regulators etc. all as specified and as directed for the following: -One light point controlled by one switch

all as per above item 89 but for one ceiling fan/exhaust fan point controlled by one switch/ceiling fan regulator.

all as per above item 89 but for for one switch socket outlet 3 pin 5 Amps on independent board

all as per above item 89 but for Wiring with 2.5 Sqmm copper multistranded unsheathed cable and 2.5 Sqmm copper cable for earth continuity conductor controlled by one 15A switch socket independently

all as per above item 89 but for Wiring with 4 Sqmm copper multistranded unsheathed cable and 4 Sqmm copper cable for earth continuity conductor for AC point.

M&L for sub main wiring with PVC insulated unsheathed FRLSH 1100 volts grade multi stranded copper conductor cable 2 runs of 4 sqmm drawn through in and incl suitable size PVC rigid conduit and all accessories fixed concealed to wall/floors along with one run of 4 sqmm PVC insulated unsheathed FRLSH copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size. Note: (a) 2 runs of 4 sqmm cable along with one run of 10 sqmm cable for earth conductor PVC conduit shall be measured as one length including taking down UNSV old wiring.

M&L for sub main wiring with PVC insulated unsheathed FRLSH 1100 volts grade multi stranded copper conductor cable 4 runs of 6 sqmm drawn through in and incl suitable size PVC rigid conduit and all accessories fixed concealed to wall/floors along with one run of 6 sqmm PVC insulated unsheathed FRLSH copper conductor multi stranded cable 1100V grade as earth continuity conductor and connected to common earth dolly including taking down existing sub main wiring of any size. Note: (a) 4 runs of 6 sqmm cable along with one run of 6 sqmm cable for earth conductor PVC conduit shall be measured as one length including taking down UNSV old wiring.

S&F in repair for Switch modular type one way 6 Amps , one module

S&F in repair for Modular socket 2/3 pin multi purpose flush type 2 modular 6 Amps.

S&F in repair for Switch modular type one way 16 Amps , one module

S&F in repair for Modular socket flush type multi purpose 6A/16A-6 pin combined 2 module

Supply & fix in repair modular type fan step regulator 360 Degree rotatable type 120W - 2 Module. Make for Items 3 to 8 : Legrand Myrius / Philips Sleek / Schneider Electric Opate or its equivalent as per Annexure.

S&F in repair for Ceiling rose 65x50mm surface PVC / Polycarbonate, isolated body with three terminals.

S&F in repair for AC box modular socket type with MCB SP 25 Amps 10 KA operating on 240 volts AC with plug top all as specified and directed.

Supply and fix in repairs modular white cover plate with frame of 1/2 module all as specified. Make : Legrand Mylink or equivalent of Indo Asian/SSK/Vision

Supply and fix in repairs modular white cover plate with frame of 3 module all as specified. Make : Legrand Mylink or equivalent of Indo Asian/SSK/Vision

Supply and fix in repairs modular white cover plate with frame of 4 module all as specified. Make : Legrand Mylink or equivalent of Indo Asian/SSK/Vision

Supply and fix in repairs modular white cover plate with frame of 6 module all as specified. Make : Legrand Mylink or equivalent of Indo Asian/SSK/Vision

Supply and fix in repairs modular white cover plate with frame of 8 module all as specified. Make : Legrand Mylink or equivalent of Indo Asian/SSK/Vision

Supply and fix in repairs modular white cover plate with frame of 12 module all as specified. Make : Legrand Mylink or equivalent of Indo Asian/SSK/Vision

Supply and fix in repairs modular metal flush box of 1/2 module all as specified. Make : Legrand Mylink or equivalent of IndoAsian/SSK/Vision

Supply and fix in repairs modular metal flush box of 3 module all as specified. Make : Legrand Mylink or equivalent of Indo Asian/SSK/Vision

Supply and fix in repairs modular metal flush box of 4 module all as specified. Make : Legrand Mylink or equivalent of Indo Asian/SSK/Vision

Supply and fix in repairs modular metal flush box of 6 module all as specified. Make : Legrand Mylink or equivalent of Indo Asian/SSK/Vision

Supply and fix in repairs modular metal flush box of 8 module all as specified. Make : Legrand Mylink or equivalent of Indo Asian/SSK/Vision

Supply and fix in repairs modular metal flush box of 12 module all as specified. Make : Legrand Mylink or equivalent of Indo Asian/SSK/Vision

Labour only for removing of ceiling fan from ceiling by disconnecting all electric connection and spray painting in situ with one coat of synthetic enamel white paint, filling cavities with filler after cleaning all dust/foreign materials and hanging only after completion of E/M and B&R works and connecting up including provision of three core copper cable of suitable size from ceiling rose or connector to fan and testing as directed.

Labour only for removing of exhaust fan metal body AC single phase 230V of size 300/380mm from wall by disconnecting all electric connection and spray painting in situ with one coat of synthetic enamel white paint, filling cavities with filler after cleaning all dust/foreign materials and fixing only after completion of E/M and B&R works with anchor bolt of suitable size and connecting up including provision of three core copper cable of suitable size from ceiling rose or connector to fan and testing, making the surface good with the existing.as directed.

Supply and fix Wall mounting BLDC fan white colour 35W, remote 6 speed fan pull chords portable swing noiseless with 3 blades, air delivery 76 CMM,400mm sweep,1500RPM, blade material ABS plastic all as specified and directed.

Supply and fix exhaust fan, steel body AC single phase 230V of size 380mm sweep with blades and frame and louvers including cutting hole for fixing exhaust fan and making the surface good with the existing. Make: Almonard/Atomburg/Crompton/Usha/Havells

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm including cuttting hole for fixing exhaust fan and making the surface good with the existing. Make: Almonard/Atomburg/Crompton/Usha/Havells

Labour only for removing of indoor unit and outdoor unit of Split air conditioner of 1.5/2TR capacity after disconnecting electric supply from switch board and kept in safe custody. Servicing of indoor and outdoor unit including topping up of refrigerant, if necessary including reinstallation and testing after completion of E/M and B&R repair work in bldg. all as specified and directed.

S&F in repair MCB DB with sheet metal enclosure double door type concealed on wall Triple pole and neutral 6 way 415V with 200A rated bus bar all as specified and directed.

S&F in repair MCB DB with sheet metal enclosure double door type concealed on wall Triple pole and neutral 4 way 415V with 200A rated bus bar all as specified and directed.

S&F in repair MCB DB with sheet metal enclosure double door type concealed on wall single pole and neutral 12 way 240V with 200A rated bus bar all as specified and directed.

S&F in repair MCB DB with sheet metal enclosure double door type concealed on wall single pole and neutral 8 way 240V with 200A rated bus bar all as specified and directed.

Supply and fixing RCBO for earth leakage, overload and short circuit protection 63A , four pole 300mA all as specified.

Supply and fixing RCBO for earth leakage, overload and short circuit protection 63A , two pole 300mA all as specified.

Supply and fixing in repair 40 to 100 Amp rating 415V, 10KA 'C' curve miniature circuit breaker (MCB) of Trible pole and Neutral in the MCB DB complete with connection testing and commissioning.

Supply and fixing in repair 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole and Neutral in the MCB DB complete with connection testing and commissioning.

Supply and fixing in repair 5 to 32 Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB complete with connection testing and commissioning.

M&L for replacing of existing Earthing complete by using GI earth plate electrode 60cm × 60cm × 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less 'than 1.5 metres below normal ground level, connected to using GI earth lead of size 4mm dia by means of bolts, nuts, check nuts and washers etc made of galvanised iron and protected by galvanised iron light grade 25 mm bore & 20mm dia galvanised medium grade for watering and including funnel, wire mesh, RCC 1:2:4 cover slab 50 mm thick with re-inforcement of 8 mm TMT bars @ 100mm c/c both directions and PCC chamber with PCC 1:3:6 type C2 including excavation and earth work, disposal of surplus soil to a distance not exceeding 50 m, charcoal, lugs, common salt complete all as specified and as shown on plate No.3 of SSR Part-I .

S&F in repair LED decorative ultra slim round profile lighting fixture with extruded polycarbonate, environment friendly energy efficient of 4'x20W on wall/ceiling all as specified and directed.

S&F in repair LED decorative ultra slim round profile lighting fixture with extruded polycarbonate, environment friendly energy efficient of 2'x10W on wall/ceiling all as specified and directed.

Supply and fixing in replacement of LED luminaire 600 mm x 600 mm,35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

S&F in repair Surface/recessed type LED ceiling light fitting 18Watt,6500K, size 30x30cm square, warm colour in polycarbonate housing with high brightness LED chips and driver to give glare free light all as specified and directed.

Supply and fixing round shape 15 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fix energy efficient LED building security light Fitting 30 Watts for fixing on existing brackets with suitable GI reducer as per site requirement including three core flexible PVC 0.5 Sqmm cable for connection all as specified and as directed. Make: Wipro/Havells/Phillips

DEFT GROUP ELECTROMECHANICAL (BID ID -3488170)

SCION ENTERPRISES (BID ID -3480914)