Janpad Unnao ke Vikash Khand Purwa Antargat GRAM SABHA Gadha Kola me Mahapran Pandit Suryakant Tripathi Nirala ka Soondari Karna ka karye

Excavation in foundation in ordinary soffioam clay or sandi including lift upto 1.5m and lead upto 30m. and including Biling watering and ramming of excavated earth into the frenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of earth.as55.1. 251

Providing and laying in cement concrete 1:6:12(1cement: 6 fine sand :12, 40 mm brick aggregrate) As per 5.1.No. 273

M-150 class Brick work in 1:6 cement & fine sand of 1.25 F.M. mortar in foundation and plinth including supply of all materials, Labour and T&P etc. required for proper completion of work. 5.1. 303

Class-150 brick work in 1:4 cement and Coarse sand mortar in foundation and plinth. As per 5.1.No. 305

Mild steel or iron work of small sizes and sections such as holding down bolts, hold fasts, ties, rods, gratings etc. (when not included in an over all rates) wrought to required form including supply of steel bolts, nuts, and wastage etc. and their fitting required for proper completion of work.

R.C.C. work with cement approved coarse sand and 2cm, gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors and windows excluding supply of reinforcement and its binding but including its fixing and binding the same with 24 B.W.G.G.L. binding wire and including necessary centering and shuttering etc. and also supply of all materials, labour and T&Prequired for proper completion of work.ass.1. 283

Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (when not included in over all retes) wrought to required shape as necessary including binding for proper completion of the work and including supply of all steel and wastage & over lapping &hooks, as 5.1. 504

12mm thick plaster with cement mortar in proportion of 1:6 with cement and fine sand of 1.25 F.M. as 5.1. 586

Earthwork in cutting or in embankment in ordinary soil exacavation in the form of regular pits with cartage 5km

Providing and laying Vitrified tiles in floor in different sizes (thickness fobe specified by the manufacturer) with water absorption less than 0.08% and conforming to 15:15622 of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 14 (1 cement 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including 0 grouting the joints with white cement and matching pigments etc The tiles must be cut with the zero chipping diamond cutter only Laving of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. As per DSR 11.49.2 je 1725 35 0 735*108/107

Providing and applying white cement based putty of average thickness of 1mm of approved brand and 1 manufacture over the plastered surface to prepare the surface even and smooth complete. As13.80

Finishing walls with acrylic paint of approved quality on 2 new work with two coats to give an even shade including all As per DSR 13.47.1

Painting or varnishing on iron works in small areas or new 3 wood work with one coat of ready mixed priming paint and teo coat enamel paint including all

S/F of 100mm dia PVC pipes with necessary clamps and nails etc.

Wiring point for light with 1.50sq. mm FR PVC insulated multistrand single core copper conductor cable in H.G PVC conduit concealed in wall with 14 5 SWG copper earth continuity wire piano type switch & ceiling rose angle/batten holder on 3 mm thick phenolic laminated sheet as directed engineer incharge including matching colour wash as per S.1 no. 131(C)

S/wiring of submain with two number 1.50sq. Mm FR PVC insulated copper wire submain as per S.I No. 1304©

1 S/F 6A to 32A SP MCB (10ka) as per S.I No. 1002 CAT B

S/F of LED Tube Light with batten suitable for up to 3 1x22 watt LED tube light including tube on Surface as per s.i. no. 1413 CAT-AA

Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). DSR 10.28

Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all as per DSR 11.56.1

Kota stone Slabs flooring over 20mm thick based laid over and jointed with grey cement slurry as per dsr 11.26.1

Providing and fixing red sand stone 40mm thick out in cement mortar 1:3 cement and sand including pointing with white cement mortar 1:2 cement and stone dust with an admission of pigment matching the stones set as per dsr 7.33 14931.55*.735*108/107

Sign Board & Photo graphy