R/M to General Pool Accommodation (Housing Board Colony) at Kangra

Amount

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. for thickness of tile 10mm to 25mm (Ten milimetre to Twenty five milimetre) as per direction of the Engineer-in-Charge, within all leads ,lifts and other incidental. The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Dismantling roofing including tridges, hips, valleys and gutters etc. and stacking the material within any lead of G.S. sheet as per direction of Engineer-in-Charge. The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm (Twenty milimetre) thick cement mortar 1:4 (One cement isto Four coarse sand), jointing with grey cement slurry @ 3.30 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete size of tile 600x600mm (Six hundred into Six hundred milimetre) and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore to wall ceiling and floor galvanized mild steel tubes (Medium grade) tube fitting and clamps including making good the wall ceiling and floor and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 20mm (Twenty milimetre) nominal bore to wall ceiling and floor galvanized mild steel tubes (Medium grade) tube fitting and clamps including making good the wall ceiling and floor and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing wood work in frames of doors, windows, clearstory windows and other frames wrought framed and fixed in position in Sal wood. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 40mm (Forty milimetre) thick Teak wood paneled glazed or paneled and glazed shutters for doors and windows including black enameled iron butt hinges with necessary screws. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 200x16mm(Two hundred into Sixteen milimetres) size anodized aluminum sliding door bolts anodized colour and shade with necessary bolts, nuts and screws etc. completed within all leads, lifts of materials and other incidentals. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete 200x10mm ((Two hundred into Ten milimetre) and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete 125mm (One hundred twenty five milimetre) and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with 4.0 mm thick glass panes and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing andfixing vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 Litre (Ten litre) low level white P.V.C. flushing cistern, including flush pipe, with manully controlled device (handle, lever), confirming to IS: 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer- In-Charge and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete and as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rate includes sale tax, octroi, royality, malkana, toll tax, GST, labour cess or other taxes imposed by the Government.

Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer’s specification and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Applying priming coat with Asian/ Nerolac enamel paint or equivalent over new wood and wood based surfaces after and including preparing the surfaces by thoroughly cleaning oil, grease dirt and other foreign matter sand papering and knotting ready mixed paint brushing wood primer pink including carriage of materials within all leads and lifts and other incidentals as per the direction of Engineer-in-Charge. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture and as per the entire satisfaction and direction of Engineer – in- Charge including carriage of materials within all leads and lifts and other incidental . The rate includes octroi, royalty, Malkana, toll tax, GST or other taxes imposed by the Government.

Painting steel work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 15mm (Fifteen milimetre) nominal bore C.P. brass bib cock of approved quality conforming to IS:8931 and as per the direction of the Engineer-in-Charge and carriage of material within all leads, lifts and other incidental . The rate including octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 10 (Ten) litre capacity white P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete and as per direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate includes octroi, royality, malkana, toll tax, GST, labour cess or other taxes imposed by the Government.

Providing and fixing 600x450 mm (Six hundred into Four hundred fifty milimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm (Six milimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete and as per direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate includes octroi, royality, malkana, toll tax, GST, labour cess or other taxes imposed by the Government.

Providing and fixing wash basin with C.I. brackets, 15mm (Fifteen milimetre) C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm (Five hundred fifty into Four hundred milimetre) with a pair of 15 mm (Fifteen milimetre) C.P. brass Pillar taps and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of IS gauge designation 85G with a wire of dia 0.56mm (Zero decimal fifty six milimetres) for doors and windows and clearstory windows including bright finished black enameled iron hinges with necessary screws 40mm (Forty milimetres) second class deodar wood, within all leads and lifts and other incidentals. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 32mm (Thirty two milimetre) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete, as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rate includes sale tax, octroi, royality, malkana, toll tax, GST, labour cess or other taxes imposed by the Government.

Providing and placing water tank make SINTEX having capacity 300 liters (Three hundred liters) each tank necessary fitting s including over flow pipe scour pipe etc. and pads required for inlet and outlet and inside painting ball valve with cover and locking arrangements including painting of good quality complete in all respect within all leads, lifts of materials and other incidentals. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in cement mortar 1:6 (One cement isto Six sand) and as per direction of the Engineer-in-Charge including carriage of material within all leads and lifts and other incidentals. The rate includes sale tax, octroi, royality, malkana, toll tax, GST, labour cess or other taxes imposed by the Government.

Providing and fixing 6mm (Six milimetre) thick plain asbestos cement sheet eiling of approved quality with butt jointing and wood screws (Frame work anx cover fillets to be measured and paid for separately). The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen milimetre) thick water proof termite resistant commercial board of Uniply/Greenply or its equivalent ISI mark maked IS No.1659 (One thousand six hundred fifty nine) in shelves and box for cup board with butt joints and fixing with nails and screws etc. complete as per architect drawing, commercial board including shelves and shutters back side of the cup board shall be 8mm (Eight milimetre) ply All cut portions of the shelves shall be finished with 12mm (Twelve milimetre) thick hard wood edging 6mm (Six milimetre). The shutter of cup boafrd from all side shall also be finished with hard wood edging including shutters of these cup board shall be finished with 1mm (One milimetre) thick lamination of approved shade finished and painted from inside complete as -per specifications approved d4rawing design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkhana and toll tax, GST or any other taxes imposed by the Government.

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying coat of approved steel primer using structural steel etc. as required in grating, frames, guard bar, ladder, railing, brackets, gates and similar works and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

15 mm (Fifteen milimetre) thick cement plaster in single coat on rough side of brick/concretes/ stone walls for interior plastering up to all floor level including arises, internal angles, chamfers and /or rounded angles not exceeding 80mm (Eighty milimetre) in girth and finished even and smooth with cement mortar 1:4 (One cement isto Four sand) within all leads, lifts, and other incidentals as per the direction of Engineer-in-Charge. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing and fixing M.S. tube hand rail of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer as per the direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Providing 0.63mm (Zero point six three milimetre) thick sheet corrugated G.I. sheet roofing fixed with galvanized iron J or L hooks, bolts and nuts 8mm (Eight milimetre) diameter with bitumen and G.I. limpet washers filled with white lead complete excluding the cost of purlins rafters and trusses. The rate is inclusive for carriage of materials within all leads, lifts and other incidentals. The rate including octroi, royality, Malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 470x420 mm (Four hundred seventy into Four hundred ]twenty milimetre) bowl depth 178mm (One hundred seventy eight milimetre) Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required and as per the direction of Engineer-in-Charge including carriage of material within all leads and lifts and other incidental. The rate including of octroi, royality, Malkana, toll tax, GST or other taxes imposed by the Government.

Sameer Bhatnagar

KARAN DHADWAL

ASHISH SHARMA

sunny verma

Ashwani

Neeraj