ANNUAL RATE CONTRACT FOR LAYING OF CI/DI PIPE LINE, CONSTRUCTION OF VALVE CHAMBER, TUBE WELL AND HAND PUMP FOR WARD 17, SOUTH ZONE FOR YEAR 2025-26

Name of work:- Annual Rate Contract for Laying of CI/DI Pipe line,

Construction of Valve Chamber, Tube Well and Hand pump

for ward 17, South zone for year 2025-26

QTY Item Description RATE

Excavation for pipeline trenche including all

safety provisions using side rails and stacking

excavated stuff upto a lead of 90 mt. cleaing the

site etc. complete for lifts and strata as

specified in all sorts of soil and soft murrum.

(GWSSB SOR 22-23, Sec. B, I.no.

1 (1) O.O TO 1.5 Mt. Depth M3

1 (2) 1.5 TO 3.0 Mt. Depth M3

1 (3) 3.0 TO 4.5 Mt. Depth M3

Lowering, laying and jointing C.I.

S & S Spun pipes suitable for Tyton joints/

Mortar lined D.I. K-7 pipes of various classes

with C.I./D.I./M.S. specials of following

diameters in proper position, grade and

alignment as directed by Engineer-in-charge

labour, including transportation, loading,

unloading & giving hydraulic testing

(GWSSB SOR. 22-23, Sec B, I.no.6., P.no. 36)

Refilling the pipeline trenches including

ramming, watering, consolidation, disposal of

surplus stuff as directed within a radious of

3kms. (GWSSB SOR.22-23, Sec.B, I. No.14.1,

Lowering, Laying, Jointing in position following

C.I./DI Double Flanged Sluice valve including

transportation from store to siteof work,

loading, unloading including cost of all labour

jointing material, including nut, bolts and

giving satisfactory hydraulic testing etc.

(GWSSBSOR.22-23, Sec.B, I.no.15.(a),

Lowering, Laying & Jointing DI Specials

suitable for tyton joints of following diameter in

proper position, grade and alignment as

directed by Engineer-in-charge including cost of

EPDM rubber ring, cutting & grinding the pipe,

including transportation, loading, unloading

from store to site of work, labor, giving

hydraulic testing etc. complete. ( VMC SOR-06-

07, Page No- 4, I.No-10)

Lowering, laying and jointing cast iron pipe line

by lead joint with specials such as tees, bends,

reducers, valves including lighting, guarding,

barricading, testing etc. complete including cost

of jointing materials, such as lead, hemp yarn

etc. complete. but excluding excavation and

(VMC SOR-06-07, page no-2 I.no 04)

Labour charges for cutting CI/DI pipes with the

help of requisite tools as directed.

(GWSSB SOR 22-23, Sec.B, I.No. 18(a), P.no.42)

1 1) Pipe thk. Upto 10 mm. Cm.

1 1) Pipe thk. Upto 11 mm to 20 mm. Cm.

Transportation of pipe with loading & unloading

with a crane is as per annexure.(B)

(Consider for metallic Pipe Average Load in

(GWSSB SOR.22-23, Sec. 2E, P.No.105,

Providing and casting in situ masscement

concrete in 1:4:8 using black stone crushed

metal of size 25mm to 40mm incl.

Consolidation curingetc. complete. (GWSSB

SOR 22-23, Sec.C, I.no.1, P.no.43) proportion

Brick work using common burnt clay building

bricks having crushing strength not less than

35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

(R & B SOR 24-25,I.no.06002BA, P.no.86) +

1 Providing and casting in situ C.C in grade M-

20(Proportions as per mix design or as per table

of IS 456 2000 in masses by weigh batching)

using granite, quartizite , trap metal of size

6mm to 20 mm for RCC work, including

scaffolding centering, formwork, needle vibrated

consolidation, curing complete up to 6 meter

ddepth or height. (excluding cost of M3

reinforcement and neat finishing) with

centering and shuttering/deshuttering etc

complete for structure other than water

(GWSSB SOR.22-23,Sec C, I.No.4(4), P.No.43)

Item No. 12 (A)

Supplying, cutting, bending, binding & placing

in position steel as per plan and design and as

per ISS 2502 including cost of steel and binding

wire for reservoir/structures only including lift

up to 6 meter upto 6mt. height or depth below Kg.

G.L for all diameters.(Thermo mechanically

treated(TMT) bars Fe-415 grade for all

diameters)(GWSSB SOR.22-23, Sec.C,

Item No. 12 (B)

Supplying, cutting, bending, binding & placing

in position steel as per plan and design and as

per ISS 2502 including cost of steel and binding

wire for reservoir/structures only including lift

up to 6 meter upto 6mt. height or depth below Kg.

G.L for all diameters.(CRS steel all diameter Fe

500 grade confirming to relevant I.s)(GWSSB

SOR.22-23, Sec.C, I.No.9(9.5), P.No.45)

Providing 15mm thick cement plaster in single

coat on Rough (Similar) side of single or half

brick walls for interior plastering upto floor two

level and finished even and smooth in (i)Cement

mortar 1:3 (1-cement:3-sand)

+ Extra over items for finishing with a floating

coat of neat cement slurry. (R & B S.O.R. 24-

Providing & supplying & fixing of steel beam for

supporting precast slab including one coat of

primer and two coat of anticorrosive paint etc.

complete.(GWSSB SOR.22-23, Sec-C,

I.No.22.1(A)(2), P.No.31) +( Sec.B,

Providing and casting in situ mass cement

concrete in 1:3:6 proportion using black stone

crushed metal of size 12mm to 25mm incl.

Consolidation curing etc. complete. with

1 (GWSSB SOR.22-23,Sec C, I.no.2.2.1, P.no.43

M.S.Specials (GWSSB SOR.22-23,Sec A,

A) M.S. specials plain & socket

1 1) upto 300 mm dia. Kg.

1 2) above 300 mm dia. Kg.

B) M.S. specials flanged ends

1 1) upto 300 mm dia. Kg.

1 2) above 300 mm dia. Kg.

Providing & laying C.I. Rod box of approximate No.

weight of 13.5 kg. As per drawing (VMC S.O.R.

1 06-07, Page No- 10, I.No-10)

Breaking of asphalt, Metal soling, etc Road.

(R.A. no. 42/2024-25 ( Road Dept.)

Reinstatement of asphalt road pavement

including providing and supplying all materials,

labour including soling, metalling, grouting M2

with tack coat, carpet, etc complete.

1 (Approved Rate)

Removing of existing C.I. cap

(VMC S.O.R. 06-07, Page No- 3, I.No-7)

1 80 mm Dia. No.

1 100mm Dia. No.

1 150mm Dia. No.

1 200mm Dia. No.

1 250mm Dia. No.

1 300mm Dia. No.

1 350mm Dia. No.

1 400mm Dia. No.

1 450mm Dia. No.

1 500mm Dia. No.

1 600mm Dia. No.

Removing of existing Pipeline incl. removal of

specials, valves, jointing material including

carting and stacking of removed material from

site of work to the department store as directed

excl. excavation and refilling.(GWSSB SOR.22-

23, Sec.G, I.No.15(A), P.No. 81)

1 80 mm Dia. Rmt.

1 100mm Dia. Rmt.

1 150mm Dia. Rmt.

1 200mm Dia. Rmt.

1 250mm Dia. Rmt.

1 300mm Dia. Rmt.

1 400mm Dia. Rmt.

1 450mm Dia. Rmt.

1 500mm Dia. Rmt.

Item No. 22 (A)

Connection transfer from old CI pipe to new CI

(Approved Rate)

Item No. 22 (B)

Providing and supplying ISI mark G.I. Pipes

with coupling & fittings of B-class and

diameter including taxes, insurance, loading,

unloading, transportation to departmental

stores, stacking etc.complete (Medium Duty)

including lowering, laying & jointing pipes with

fittings in proper position, grade and alignment

as directed by Enginer-in-chatge including

conveyance from store to site of work, labour

giving hydraulic testing etc. complete.

(GWSSB SOR.22-23,Sec A, I.no.6.1(b), P.no.10

+ Sec-B, I.No 7.1,P.no.36)

1 (1) 15mm Dia. Rmt.

1 (2) 20mm Dia. Rmt.

1 (3) 25mm Dia. Rmt.

Providing and supplying ISI mark

stoneware Pipes of class-A and

following diameter including all taxes,

insurance, loading, unloading, tansportation to

site of work, including lowering, laying and

jointing with cement joint in C.C(1:1) in proper

position, grade and alignment etc.complete

(GWSSB SOR.22-23, Sec.A, I.No.11.1, P.No.17

+ Sec.B, I.No.12, P.No.40)

1 1) 100mm Dia. Rmt.

1 2) 150mm Dia. Rmt.

Dismentaling tiled of stone floors laid in mortar

including stacking of serviceable materilas and

of unserviceable materials with all lead and lift. M2

(R&B SOR 2024-25 P NO. 147 I.No NO.20005)

Demolition including stacking of serviceable

and disposal of unserviceable materials with all

lift. (i) R.C.C. work (R & B SOR 24-25, P. No.

Laying and fixing of 50mm thick interlocking

paver block as per design given by Engineer

Incharge with 50mm thick sand bed layer,

watering, compacting paving with compacter by

mechanical compacter etc. complete as per

specification .( R.A. NO. 35/2024-25, ROAD

Filling in foundation and plinth with brick Bats

Chhara in layers of 20cm. thickness including

watering, remming and consolidating etc.

complete.(Up to 10 ton) (R & B SOR 24-25,

I.no. 04009A, P.no.69) +1 % Cess

Providing and fixing pre-cast Rubber Dye /steel

Dye inter locking concrete block 60mmthick

with grade of concrete M300

pnumaticcompressed / vibrated mechanically

and asper approved design Confirming to IS

15658 :2006 including 35 mm Sand layer for M2

levelling and filling the joint with sand in proper

line and level as per guidlines of IRC : SP 63-

2018 etc. Complete (R & B SOR 24-25, I.no.

HS/MS pipe cutting with necessary tools

(GWSSB SOR.22-23, Sec.E, I.No.8.2), P.No.67)

1 1) up to 5 mm thick Rmt.

1 2) 5 to 10 mm thick Rmt.

3) above 10 mm thick

1 HS/MS pipe welding incl. finishing of joint. Rmt.

(GWSSB SOR.22-23, Sec-E, I.No. 7.2, P.No.67 )

Removing the Sluice valve as directed by

engineer in charge shifting and placing the

same valve in line and level as directed by

engineer in charge (VMC S.O.R. 06-07, Page

Dewatering by pumping set of required capacity

including tamporary platform carting pumping

at site and fixing same in position including

all accessories and fuel labour etc. complete.

(GWSSB SOR 22-23 part 2, Sec.E, I.no.1, P.no.

1 Filling in plinth with sand under floors

including watering ramming, consolidating and

dressing complete

Box cutting the Road surface to proper slope

and camber for making a base for road work

incl. removing the excavated stuff and

depositing on the road side slope us directed

upto 50 Mt.lead. ( R & B SOR 2024-25, Page No

- 177, It code 26008,) +1% Cess

1 Carting of conveying and utilising the M3

stuff in bank from end of cutting with all

required lead and lift.(C) Above 400 Meters upto

500 Meters.( R & B SOR 2024-25, Page No -

178, It code.-26010C) + 1% Cess

1 Providing and laying compacted granular sub-

base (GSB) in required layer by providing

course graded material (Grading V) using rever

bad material such as unscreened gravel (CBR M3

more then 30%) including spreading, watering

consolidation by vibratory roller etc. complete.

(Road Project Approved R.A. no. 20/24-25)

1 Providing & laying compacted machine crushed

black stone aggregate (Sevalia/Timba area) wet

mix macadam (W.M.M.) in the material with

water to OMC in mechanically mix (pug mill)

carriage of mix material by tipper to site laying

with motor grader spreading and compacting in

sub base, base course on well prepared under

base on compacting with compacting power

vibrator roller to achieve the desired density

(mechanically laid)

(Road Project Approved R.A. no. 21/24-25)

Labour Charges for repairing of leakage in

HDPE pipeline with but welding of folling dia

meter at different places including necessary

excavation manually or by mechanise

excavation, dewatering removing of mud,

cleaning of pipe and leakage portion of pipe

from trench with inclussive of mechanical

devices JCB if necessary & labours required

with providing jointing material with welding

mechine etc. comp. (including all material

)(GWSSB SOR 22-23 part 1, Sec.G,(M&R)

Labour Charges for repairing of leakage in

HDPE pipeline of folling dia meter at different

places including necessary excavation manually

or by mechanise excavation, dewatering

removing of mud, cleaning of pipe and leakage

portion of pipe from trench with inclussive of

mechanical devices JCB if necessary & labours

required with providing material such as MS

clamp of required size with nut, bolt etc. comp.

(incl. all material but Exclu. cost of

pipe)(GWSSB SOR 22-23 part 1, Sec.G,(M&R)

Labour charges for repairing of leakage in

HDPE pipeline of folling dia meter at different

places including necessary excavation manually

or by mechinery,dewatering, removing of mud,

cleaning of pipe and leakage portion, cutting

the pipeline,jointing & reparing using C.I.D.

Joints inclusive of using all required

machinery, labour,DG Set, Fuel Operetor, CID

Joints, rubbe rings, nut bolts, etc. complete. (

but Excluding cost of pipe)GWSSB SOR 22-23

part 1, Sec.G,(M&R) I.no.9, P.no.76)

Excavation by JCB machine:

Excavation for pipe line trenches in shorts of

soil and soft murrum/tar road etc. including all

1 safety provision using site rails and stacking

excavated stuff up to a lead of 90 m cleaning Hour

the site etc. complete as per the instruction of

engineer-in-charge for lifts abd strata as

specified with the help of JCB machine.

(rates are approved by ARC of feeder standing

committee tharav no.368, DT.22-09-23)

Hiring of JCB breaker machine with operater/

1 driver, diesel etc. complete. Hour

(rates are approved by ARC of feeder standing

committee tharav no.484, DT.26-10-23)

Item No.44 hour

Hiring of earth mover like JCB including driver

(GWSSB SOR 13-14 , Sec –F, Item no.

Hiring of Hydra I Crane with Driver (8 working

(GWSSSB SOR 22-23, SEC 2E, PG NO

Structural steel work ( Confirming to IS 4923-

bolted or welded in builtup for all type sections,

work, including cutting, hoisting, fixing in

applying a priming coat of approved steel

complete as per the structural designs and

Engineer in charge.)

R&B SOR 2024-25 I NO. 20054 PG NO.

Providing and laying cement concrete 1:2:4 (1-

Cement : 2- Coarse sand : 4- graded stone

aggregates 20 mm nominal size) and curing

complete excluding cost of formwork in (A)

Foundation and Plinth

R&B SOR 2024-25 I NO. 05010AA PG NO.

PART - B (Valves & Specials)

Providing & supplying of Following Slucie

Valve Ductile Iron/Spheroidal Graphite (S.G.)

Iron Double flanged resilient seated Sluice

Valves Full bore in accordance with BS

5163/EN 1074-1&2 of PN-10/16 rated, with

Body and Bonnet of Ductile Iron confirming to

GGG-50/40 or IS 1865 Gr. (SG 500/7 or SG

400/15), Wedge of WRAS or DVGWapproved

EPDM rubber (approved for drinking water),

Integral Wedge nut, Shaft of S.S. AISI 420, O

rings of NBR. Body & Bonnet coated with

electrostatically applied epoxy powder coating

to DIN 30677-2 & GSK guidelines or equivalent

to GSK Guideline.Blue colour RAL 5005/5017

with a coating thickness of 250 microns both

inside & outside. Sluice valve shall be

compatible for buried applications without valve

chamber. Face-to-face dimensions as per BS

5163/EN558 and Flange drilling as per IS

1538. 100% tight shut-off. Manual operation by

Hand wheel at present but it should be

upgrdabale and suitable for motorized

operation by Electrical Actuator suitable for

SCADA system. (Rate from quatation of

JUPITER Engineering co)

1 1) 100mm Dia. P.N. 16 No.

1 2) 150mm Dia. P.N. 16 No.

1 3) 200mm Dia. P.N. 16 No.

1 4) 250mm Dia. P.N. 16 No.

1 5) 300mm Dia. P.N. 16 No.

1 6) 350mm Dia. P.N. 16 No.

1 7) 400mm Dia. P.N. 16 No.

1 8) 450mm Dia. P.N. 16 No.

1 9) 500mm Dia. P.N. 16 No.

1 10) 600mm Dia. P.N. 16 No.

Item No.4 (B) (1)

Providing and supplying of DI tail pieces for

sluice valve at store or at site of work including

freight. Loading, unloading, insurance,

inspection charges, octroi and all taxes etc.

complete as per IS-8329-1994 with ISI

mark.(GWSSB SOR 22-23,Sec.A ,I.no.8.2.B,

1 1) Flange Ended 80 to 300 mm Dia. Kg.

2) Flange Ended 350 to 600 mm Dia.

Item No.4 (B) (2)

P & S CI tail pieces. (GWSSB SOR 22-23,Sec.A

1 1) 80 to 300 mm Dia. Kg.

1) 350 to 650 mm Dia.

Manufacturing, supply & delivery of ductile iron

flange socket spigot bends, tees, reducers or

any other specials as per BS-EN-545/1995

class-A series K-12 suitable for use with D.I.

Pipe manufactured as per IS:8329/1994

delivery of specials is to be to GWSSB store or

site of works any where in Gujarat including all

taxes, loading, unloading, carting, stacking,

insurance, inspection charges, octroi etc.

complete. (GWSSB SOR-22-23,Sec.A,

1 1) 80 to 300 mm Dia. Kg.

1 2) 350 to 600 mm Dia. Kg.

Providing and supplying at store or site of work

C.I. special's like tees, bends, reducers, caps

etc. as per IS 1538-1993 with ISI mark,

inclusive of transporting, all taxes, Insurance,

Inspection charges, octroi, loading and

Unloading etc. complete.

(GWSSB SOR 22-23,Sec.A ,I.no.19.1.A, P.no.28)

1 1) Up to 300 mm Dia. Kg.

1 2) 350 to 600 mm Dia. Kg.

Part – C HSC ON DI PIPE MAINS USING MDPE PIPES

House Sevice Connection (1/2") 20 mm

Composite DI Strap Saddle for DI pipes , SS No

304 Body with SS Strap, Size - 80 - 300 NB x

1 1/2" ( V.M.C. approved rate dt. 02/11/2018)

Regulating Brass Ferrule, size 15 mm (1/2") ( No

1 V.M.C. approved rate dt. 02/11/2018)

Metel Inserted female threaded adaptor with No

SS304 material. As per ISO 14236-2000.

Pressure rating will be PN 16, Size - 20 mm x

1 (1/2") ( V.M.C. approved rate dt. 02/11/2018)

Double Compression Elbow with Compression No

on both side , PN 16 size - 20 mm ( V.M.C.

1 approved rate dt. 02/11/2018)

U PVC ball valve with Compression / Female No

threaded, PN 16, Size 20 mm x (1/2") ( V.M.C.

1 approved rate dt. 02/11/2018)

MDPE Blue Pipe as per ISO 4427, Pressure 16 Rmt

kg. Size - 20 mm ( V.M.C. approved rate dt.

House Service Connection (3/4") 25 mm

Composite DI Strap Saddle for DI pipes, SS 304 No

Body with SS Strap, Size - 80 -300 NB x 3/4" (

1 V.M.C. approved rate dt. 02/11/2018)

Regulating Brass Ferrule , Size - 20 mm (3/4") No

( V.M.C. approved rate dt. 02/11/2018)

Metal inserted female threaded adaptor with SS No

304 material. As per ISO 14236-2000. Pressure

rating will be PN 16, Size - 25mm x 3/4" (

1 V.M.C. approved rate dt. 02/11/2018)

Double Compression Elbow with Compression No

on both side, PN 16, Size - 25 mm ( V.M.C.

approved rate dt. 02/11/2018)

U PVC ball valve with Compression / Female No

threded, PN 16, Size - 25 mm x 3/4"

MDPE Blue Pipe as per ISO 4427, Pressure 16 Rmt

Kg, Size - 25 mm ( V.M.C. approved rate dt.

House Service Connection (1") 32 mm

Composite DI Strap Saddle for DI pipes, SS 304 No

Body with SS Strap, Size - 80 -300 NB x 1" (

1 V.M.C. approved rate dt. 02/11/2018)

Regulating Brass Ferrule , Size - 25 mm (1") No

Metal inserted female threaded adaptor with SS No

304 material. As per ISO 14236-2000. Pressure

rating will be PN 16, Size - 32mm x 1" ( V.M.C.

approved rate dt. 02/11/2018)

Double Compression Elbow with Compression No

on both side, PN 16, Size - 32 mm ( V.M.C.

approved rate dt. 02/11/2018)

U PVC ball valve with Compression / Female No

threded, PN 16, Size - 32 mm x 1" ( V.M.C.

approved rate dt. 02/11/2018)

MDPE Blue Pipe as per ISO 4427, Pressure 16 Rmt

Kg, Size - 32 mm ( V.M.C. approved rate dt.