Construction of Ancillary Building storeroom mens and womens changing rooms and washrooms beside newly proposed Hockey Court at SnCC IIT Hyderabad Kandi Sangareddy Sub Head A Civil Works Sub Head B Electrical works

Amount

Sub Head - A : Civil Works Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.

All kinds of soil

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and lift upto 1.5 m, as directed by Engineer-in- Charge:

All kinds of soil

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 50km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.

Providing and laying in position ready mixed or site batched design mix cement concrete for plain cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/ Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete

All works upto plinth level :

Concrete of M10 grade with minimum cement content of 220 kg /cum

Centering and shuttering including strutting, propping etc. and removal of form for all heights:

Foundations, footings, bases for columns ect for mass Concrete

Lintels, beams, plinth beams, girders, bressumers and cantilevers

Columns, Pillars, Piers, Abutments, Posts and Struts

Suspended floors, roofs, landings, balconies and access platform

Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. Note :- Cement content considered in this item is @ 330 kg/cum. Excess/ less cement used as per design mix is payable/recoverable separately)

All works upto plinth level

Concrete of M25 grade with minimum cement content of 330 kg /cum

All works above plinth level upto floor V level

Concrete of M25 grade with minimum cement content of 330 kg /cum

Providing and laying solid concrete blocks masonry with block of M7.5 grade cement concrete block of required thickness as per drawing in foundation and plinth with RCC band and mullion as per structural detail in cement mortar 1:4 (1 cement : 4 coarse sand) all complete as per direction of Engineer. (The payment of RCC elements shuttering and reinforcement shall be made for separately).

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement.

20 mm cement plaster

18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement : 6 fine sand).

12 mm cement plaster of mix :

1:4 (1 cement: 4 fine sand)

6 mm cement plaster

Neat cement punning.

Finishing walls with Acrylic Smooth exterior paint of required shade

New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 grams/ litre of approved manufacture and of required shade and colour all complete to achieve even shade and colour :

New work (one or more coats over and including water thinnable priming coat with cement primer having VOC content less than 50 grams/ litre

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Reinforcement of R.C.C. work including sraighttening, cutting, bending, placing in position and binding all complete.

Thermo-Mechanically Treated bars.

Providing, supplying and fixing pre-painted metal door frame and shutter single leaf of approved make as per particular specifications with overall size as per site requirement. Door frames shall be made with 1.2mm thk galvanised steel sheet pressed to double rebate profile of size 100mmx58mm with Mitered Joint. The frame shall be extruded profile with inbuilt EPDM seals slid into the groove. Door shutter shall be made with 0.8mm thick galvanised steel sheet pressed formed to provide not less than 46mm thick fully flush double skin panel with lock seam joints at style edges. The internal construction of panel shall be specially designed Honey comb structure. Shutter and frame shall be finished with zinc phosphate steel primer & polyurethene paint etc. complete.

The frame and shutter shall also have provision for required iron mongery(by providing extra metallic reinforcement).The shutter is to be fixed to frame with 4 Nos (for each shutter) -5 knuckle, 2 bearing butt hinges of size 100x75x3mm of approved equivalent make in SS 304 with satin finish as per EN 1935, CE marked all complete as per the drawing and directions of Engineer-In-Charge. The rate includes cost of pre-painted frame and shutter, SS Hinges, EPDM Seals / gasket, fittings for fixing such as fasteners, screws, fixing charges for all levels and leads etc. The clear opening in masonry shall be measured for payment.

a) With Door frame size of 100mmx58mm

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS:16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed > 45 m/sec as per IS 875 - Part 3 (ii) Sites with structure height more than 20m for all wind speeds.

Fixed window / ventilator with mullion / transom.

Using R1 series with frame (33mm & above ) x (35mm & above) & mullion (33mm & above) x (50mm & above). (Height upto 0.90 meter)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Ceramic glazed wall tiles of size 300mm x 200mm and or above shall be provided).

Providing and laying vitrified (full body-mat finish) floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS : 15622 , of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3kg/sqm including grouting the joints with white cement and matching pigments etc., complete.

Size of Tile 600 x 600 mm

Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of ppropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth.

Granite Stone of approved shade

Providing and fixing white vitreous Concealed water closet hindware cornice(92054) /Equivalent with 10 Lt concealed cisten hindware concealo neo with full frame and drain sets(525063)/Equivalent including flush plate cute chrome hindware 508177 including seat and lid with required all necessary fittings ,overflow arrangement with specials of standard make and approved municipal design complete, cutting and making good the walls and floors wherever required :etc. all complete as per direction of Engineer in Charge.

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 280x345x690 mm Rhine Hindware Model /equivalent with Jaquar urinalSelf closing angle cock pressmatic for urinal with wall flange and 200 mm connecting pipe PRS-CHR-077 /Equivalent including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

Providing and fixing of CERA make CONCORD Snow white sink 550x425x180mm/Equivalent sizewith sink cock with 150 mm long swivel spout of Cera make F2013301/Equivalent of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever require: etc. all complete as per direction of Engineer in Charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

providing and fixing of PVC multi inlet /plain floor trap of approved brand and manufacture with minimum 40mm water seal, suitable bushes/reducers for inlet connection sutable support including all leads, lifts levels and heights etc.

75mm dia Outlet

Providing and fixing at all floors Type B - PVC/Rigid pipes including all fittings such as plain and door bends, tees, elbows, equal and unequal junctions, heel rest sanitary bends, collars etc. confirming to IS13592, IS 14735, including jointing with solvent and providing necessary supports, clamps/MS brackets at specified intervals The joints of pipe and fittings shall be with drip seal jointing in exposed areas lik in shafts etc. and pasted type (solvent ) for all other locations all complete and as per directions of Engineer - in - charge.MS brackets shall be paid separately.

For 110mm dia pipe.

For 75mm dia pipe.

For 50 mm dia pipe.

For 160 mm dia pipe.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. :

Concealed work, including cutting chases and making good the walls etc.

20 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.

External work

32 mm nominal outer dia .Pipes.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of Engineer in Charge.

50 mm nominal outer dia .Pipes.

Providing and fixing of brass ball valves of 2" dia of make Zoloto or its equivalent all complete as per the directions of Engineer in Charge.

32 mm nominal bore

Providing and fixing of brass ball valves of 2" dia of make Zoloto or its equivalent all complete as per the directions of Engineer in Charge.

50 mm nominal bore

Providing and fixing of CP grating of approved quality etc ,complete as per the directions of Engineer-in-Charge.

75 mm Dia

Providing and fixing of ABS body Health faucet with wall hook and 1 metre length PVC hose pipe etc. of approved make CERA F 8030108AB or Equivalent as directed by Engineer In-Charge.

Providing and fixing of chrome finish two way bib cock of approved make CERA (Model No. F2002161) or Equivalent as directed by Engineer In-Charge.

Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

All kinds of soil

Pipes, cables etc. not exceeding 80 mm dia.

Pipes, cables etc. exceeding 80 mm dia. But not exceeding 300 mm dia

Pipes, cables etc. exceeding 300 mm dia but not exceeding 600mm dia.

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality

Rectangular shape 600x450 mm internal dimensions

Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality

Circular shape 560 mm internal diameter

Providing and fixing of Paper Holder of approved make CERA (Model No. F5003109) or Equivalent as directed by Engineer In-Charge.

Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design

100x100 mm size P type

With common burnt clay F.P.S. (non modular) bricks of class designation 3.5

Providing and fixing of Liqiud soap Dispenser of approved make CERA (Model No. F5007111) or Equivalent as directed by Engineer In-Charge.

Restroom Cubicles Providing & fixing Greenlam Sturdo Air Collection- Whirl Restroom Cubicle or equivalent (of following standard dimension which includes 600mm door size width) self-supporting 18mm thick compact laminates made out of, urea free, thermosetting phenolic resins treated Kraft papers as core material and Amino plastic resin treated decor papers on the finish surface, conforming to latest and applicable IS: 2046-1995, EN 438:2016 and NEMA LD3-2005 quality standards with Antivirus, Antibacterial and Antifungal properties (conforming to ISO 21702:2019, JIS Z2801:2010 and ASTM G21-2015 standards respectively) to fulfil the applicable requirements of indoor air quality certifications for Greenguard-Gold standards. This also includes providing and fixing in position necessary hardware made out of Stainless steel (Grade 316), Aluminium 6063 -T6 and Anodised Zinc Diecasted as per manufacturer’s specifications & Architects instructions like (1) SS Spring Loaded Hinges (2) Zn Slide Bolt with Occupancy indicators (3) Zn Coat hooks (5) Aluminium anodised U- F Channels (4) SS Shoe Box (5) SS grade 316 RAB (6) Rubber noise deafening tape, (7) Screws & wall Plugs. All screws will of 316 Grade in stainless steel . All pilasters are supported by stainless steel shoe box. The base of the stainless steel shoe box will be anchored to the floor with a clearance height upto 100mm

Toilet Cubicle with standard dimension of 1840mm Height x 1000mm Width x 1500mm Depth, which includes 600mm door size width).

Providing and fixing of Towel Rail 600 mm length of approved make CERA (Model No. F5014103CH) or Equivalent as directed by Engineer In-Charge.

Providing and fixing ofwall mixer with bend pipe for over head show with built-in non return valve of approved make CERA (Model No. F1014402) or Equivalent,overhead shower arm of approved make CERA(Model No:F 7040104) and overhead shower 95 mm (4" ) dia with 3 flow of approved make CERA(Model No: F7020304AB) as directed by Engineer In-Charge.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.

Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete :

300 mm dia. R.C.C. pipe

Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/ spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete

450 mm dia RCC pipes.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.

With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI- 212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.

For vertical surface two coats @ 0.70 kg per sqm

For horizontal surface one coat @1.10 kg per sqm.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby red

Area of slab Over 0.5 sqm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1 :4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels.

Granite stone slab of colour black, Cherry/Ruby red

Area of slab Up to 0.5 sqm

Providing and fixing of CERA makeF8040204 /equivalent make angle valve for inlet connection of wash basin etc. all complete as per direction of Engineer in Charge.

Providing and fixing of 20 mm Brass balve valve of approved make to fix at main inlet line connection etc. all complete as per direction of Engineer in Charge.

Providing and laying of HDPE pipe 50 mm dia Grade PN8 PE100 including cost and conveyance of all materials to site of approved quality & make with all necessary fittings and joiting of pipe with flanges, nut & bolts and water point provision at required location including saddle and G.I fittings with gi Long Elbow for hose pipe connection etc., the rate includes excavation and refilling of trench and all complete as per the directions of the Engineer-in-Charge.

Providing and fixing in position collapsible steel shutters with vertical channels 20x1 0x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer.

Sub Head - B : Electrical Works Wiring: Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

Group C

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

4 X 6 sq. mm + 2 X 6 sq. mm earth wire

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

15/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing following size modules GI box along with modular base and cover plate & for madular switches in recess etc. as required.

3 Module (100mm X 75mm )

6 module (200mm X 75mm)

Supply and installation of Surface/wall mounted 20W, 230V, LED batten type light fixture, 4 Feet, 6500k - Cool white, IP20, extruded thermal Polycarbonate housing provided for efficient heat dissipation with High optically efficient diffuser and integrated electronic driver with ISI mark as required. Similar to Make : Havells , Model :LED Pride Plus NXT Batten 20 W 6500 K

Supply and installation of Surface/wall mounted 10W, 230V, LED batten type light fixture, 2 feet, 6500k - Cool white, IP20, extruded thermal Polycarbonate housing provided for efficient heat dissipation with High optically efficient diffuser and integrated electronic driver with ISI mark as required. Make :Havells, Model:LED Pride Plus Neo Batten 10 W 6500 K

Supply of Energy Saving BLDC Wall mounted Fan with Remote Control 35W, 400mm sweep with ISI mark as required. (Similar to Make : Atomberg , Model :Renesa wall fan )

Supply, instllation, testing and commissioning of 28W - 33W ceiling mount exhaust fan sweep 100-130 mm, High quality engineering plastic, resistant to colour change with anti-static properties, with minimum 2 years warrenty. Similar to Make: Havells, Model: Ventilair DXC Plastic Domestic Exhaust Fan

Supply, laying and fixing the PVC pipe of 4 KGF/cm2 grade including PN 6 grade bends, Tee and reducer or enlarger including connections with required solvent or sealant for air lock mechanism connection till the discharge of the exhaust fan.

110 mm nominal dia.

Supply, Installation, testing and commissioning of Environmental friendly, long life, corrosion resistant, aluminum die cast housing, 100W LED IP 66 LED FloodLight Suitable for wall mounting etc. as required (Similar to Make: Havells, Model: SPECTRAFLS100W).

MCCB, MCB & DB'S Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (but without MCB's and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.)

4 way (4 + 12), Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

6 way (4 + 18), Double door

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

12 way, Double door

Providing and fixing following rating and breaking capacity and pole MCCB in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.

100 Amp, 30KA, FPMCCB

Supplying and fixing of 415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles and Amps rating in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Four pole 32A

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Single pole

Double Pole

Triple Pole

GEYSER INSTALLATION Supply, installation, testing and commissioning of wall-mounted storage type electric water geyser of capacity 15 litres, suitable for 240V, 50 Hz AC supply, rated at 2 kW power consumption, with adjustable thermostat for temperature range 25°C to 75°C, including all necessary accessories such as mounting brackets, wall plugs, fasteners, inlet-outlet pipes, pressure release valve, insulation, electrical connections using suitable size copper wires from the nearest point, and making good the disturbed surface as required, complete in all respct.

EARTHING Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supply and Laying 6 SWG G.I wire on surface or in recess for loop earthing along with existing surface/recessed conduit/ submain wiring/cable as required.

MV CABLE LAYING Supply loading transportation, unloading at site, storage at site, shifting from storage place to site of following size XLPE insulated PVC sheathed, FRLS aluminium conductor armoured power cable of 1.1 KV grade fonfirming to IS 7098 amended upto date as per specifications.

4C x 35 Sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.

Up to 35sqmm

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade as required.

4 core X 35 Sqmm (32mm)

Krestone Projects Private Limited (BID ID -3257061)

sabavath sujeet (BID ID -3257110)

CIVIC INFRAPROJECTS PVT LTD (BID ID -3257205)

sss constructions (BID ID -3256053)