Comprehensive Maintenance and Repairs Replacement of Defective Parts of Lifts of ECE Make at Naval Park and Nausena Baugh under GE Utility-I, Visakhapatnam

Amount

Notes for Serial Item No. 1: [a] MINIMUM MANPOWER TO BE EMPLOYED: The contractor shall be required to employ the following minimum tradesmen for Serial Item No. 1 of BoQ in following combination for round the clock of 24 Hours and shall report to Office of AGE [E/M] for day to day maintenance and efficient operation of Lifts: [i] One Lift Mechanic and one Helper per Shift of 08 Hours from 0600 Hours to 1400 Hours for 28Nos. of Lifts. [ii] One Lift Mechanic and one Helper per Shift of 08 Hours from 1400 Hours to 2200 Hours for 28Nos. of Lifts. [iii] One Lift Mechanic and one Helper per Shift of 08 Hours from 2200 Hours to 0600 Hours for 28Nos. of Lifts.

[b] The rate quoted is deemed to be inclusive of supply and fixing of all Major and Minor Spares viz. Mechanical / Electrical / Electronic / LED Lights etc. except Spares catered vide Serial Item No. 2 to 30 of BoQ as and when required for trouble free and smooth operation of lifts also including overhauling as and when required to all mechanical parts of lifts, Rewinding of Electric Motors, repair/maintenance of Gear Unit, repair / maintenance of Door Drive, Controllers, Pulleys, Limit Switches, Relays etc. complete all as directed by the Engineer-in-Charge. All the safety measures including ARDs shall be ensured for serviceable condition round the clock and cost of their spares, etc. shall deemed to be included in the rate quoted. Nothing extra shall be paid extra on these accounts. Spares catered vide Serial Item No. 2 to 30 of BoQ shall be measured and paid separately as "Supply Only" whenever required and rate quoted for Serial Item No. 1 of BoQ shall be excluding the same. However, fixing / repairs shall be deemed to be included in the rate quoted. [c] The rate quoted shall be deemed to be inclusive of testing of each lift by Licensed Lift Inspector of Government of Andhra Pradesh twice in Contract Period for worthiness of the Lift in respect of safety. Certificate issued by the Licensed Lift Inspector shall be submitted to the Engineer-in-Charge and a copy of Certificate shall be displayed in all Lift Cabins as directed by Engineer-in-Charge. [d] Emergency Light and necessary tools shall be available in a tool box in the shift for smooth functioning of lifts. [e] Conveyance and communication system like mobile phone etc. shall be provided by the contractor to all Lift Mechanics and Helpers. [f] The contractor shall abide by the latest Labour Rules and Minimum Wages Act. [g] Wages paid by the contractor to the persons employed shall not be less than the minimum wages fixed by State / Central Government from time to time whichever is higher. The contractor shall also insure the workmen employed on the job.

[h] The contractor is responsible for Insurance, EPF, ESI, Gratuity, Bonus, Labour Welfare Cess etc., as applicable and shall be paid to the Workmen as per existing Labour Rules / Acts / Regulations and rate quoted shall be deemed to be included for the same. [i] INSURANCE AND DRESS CODE: The contractor shall provide the workmen with Dark Blue Colour Uniform [Formal Pant & T-Shirt] with labels showing / printed i.e. "Name of the Firm and Designation" on Front and "GE [U - I] [V]" on the back of the T-Shirt along with protective clothing / gear. The contractor shall also provide shoes to the workers and the persons shall not be allowed to enter the work site without wearing shoes. [j] The contractor shall be responsible for all Accidents / Injuries happening to the workmen. Any accident causing Minor / Fatal Injury, Partial Disability due to any untoward incident or non-adherence to Safety and IE Regulations or fault in maintaining of Lifts System / Safety Mechanism or on account of any mishandling / wrong operation / lack of knowledge of safety precautions or on account of any circumstances beyond his/their control, the contractor shall be solely responsible for settling all claims of compensation to the deceased, failing which department will have a right to recover any sum indicated / claimed by Labour Commissioner / Court authorities. No claim whatsoever will be entertained in this regard. No compensation is payable by the department on this account. Contractor shall provide first aid boxes to meet any emergency situations. [k] The contractor shall carryout the comprehensive maintenance of the lifts catered under subject work through the any Original Equipment Manufacturers of the Lifts as listed here in after or from their accredited / authorised agencies only. The lowest bidder shall submit MoU from the Any Original Equipment Manufacturer of the Lift as as listed here in after or from their accredited / authorised agencies to provide technical support, trained persons for maintenance & testing and spares before commencement of the work to GE. The spares shall be of the make as per existing or compatible make of any OEM of the lift as listed here in after.

List of the OEM's of the Lifts: Johnson Lifts Pvt. Ltd. / Thyssenkrupp Elevators India Pvt. Ltd. / Omega Elevators / Escon Elevators Pvt. Ltd. / LT Elevators Pvt. Ltd. / IES Elevators Pvt. Ltd. / Kone India / Schneider India Pvt. Ltd. / Kinetic Hyundai Elevators Movement Tech Ltd. / Hitachi Lifts India Pvt. Ltd. / Mitsubishi Elevator India Pvt. Ltd. / Otis Elevator Company India Ltd. / Fujitech India Pvt. Ltd.

Supply only APLCD R4 PCB Mother Board for goods lift (2000Kg) complete all as specified and as directed.

Supply only Main Contactor with Coil, 60 Amps , Power Contactor with 2 NO + 2NC Auxiliary Contacts and with 230 Volts, DC Coil complete all as specified and as directed.

Supply only Power Contactor, 32 Amps with 02 No + 2 NC Auxiliary Contacts with 230 Volts AC / 110 Volts DC complete all as specified and as directed.

Supply only Trailing Cable 12 Core X 0.75 Sq.mm complete all as specified and as directed.

Supply only Microprocessor L 40 BWA complete all as specified and as directed.

Supply only Input Module 24 Volts DC I/P or Potential Free Relay O/P Contact to match with Micrologix 1200 complete all as specified and as directed.

Supply only Full Length Infrared Sensor 64 Beams for Car Door including Transmitter, Receiver and Control Unit working on 230 Volts, AC complete all as specified and as directed.

Supply, install, testing and commissioning of Automatic Rescue Device of Microprocessor based control with VVVF Drive, Thoshiba compatible, ISI marked for Power Control, Battery backup of 72 Volts with Battery Charging Unit / Circuit, Inverter Circuits with Transformer for break door control 12V, 72 AH batteries in 06 Nos including provision of all indications like Battery Charging, Rescue Operations ON / OFF, Lift Moving Up / Down, Safety complete Lift at floor shall be on front panel including necessary power and control wiring between existing controller and ARD for the safe and satisfactory operation of the ARD suitable for 8/10 Passenger Lift (544Kg / 680Kg) of multi-storeyed Buildings up to G+14 Floors complete all as specified and as directed.

Supply, install, testing and commissioning of Automatic Rescue Device of Microprocessor based control with VVVF Drive, Thoshiba compatible, ISI marked for Power Control, Battery backup of 72 Volts with Battery Charging Unit / Circuit, Inverter Circuits with Transformer for break door control 12V, 72 AH batteries in 06 Nos including provision of all indications like Battery Charging, Rescue Operations ON / OFF, Lift Moving Up / Down, Safety complete Lift at floor shall be on front panel including necessary power and control wiring between existing controller and ARD for the safe and satisfactory operation of the ARD suitable for Goods Lift (2000Kg) of multi-storeyed Buildings up to G+14 Floors complete all as specified and as directed.

Supply only Converter Card of Automatic Rescue Device to Convert 72 Volts DC Input to 24 Volts DC Output for Control Circuit complete all as specified and as directed.

Supply only Mosfet Card of Automatic Rescue Device to covert 72 Volts DC to 230 Volts AC 3 Amps Rating complete all as specified and as directed.

Supply only Rotary Encoder 1024 Pulse for Speed feedback of Main Drive complete all as specified and as directed.

Supply only Door Motor with Built-in Rotary Encoder and suitable VVVF Drive for Car Door operation complete all as specified and as directed.

Supply only VVVF Drive 11 KW to 15 KW for Lift Motor of 9 KW to 11 KW including feeding all parameters and interfacing with Controller Micro Processor and Drive including setting of basic parameters to obtain the desired and designed value of various motions of the lift complete all as per manufacturer's instructions, complete all as specified and as directed. [a] Input Voltage: 380 to 460 Volts [b] Phase: 3 Phase [c] Motor Power in KW: 11 KW [d] Capacity in KVA: 55.04 KVA

Supply only CPIP PCB board related to controller for communication signals and registration complete all as specified and as directed.

Supply only WDT PCB board related to controller for communication signals and registration complete all as specified and as directed.

Supply only PU-10 PCB board related to controller for Programming complete all as specified and as directed.

Supply only Gear Box suitable for 10 Passenger Lifts with 1.5 MPS Serving G+14 Floors with a travel of 45 Metres along with Traction Sheave and testing all as per manufacturer’s instructions complete all as specified and as directed.

Supply only Maintenance Free Sealed Battery, 12 Volts, 7 AH Capacity complete all as specified and as directed.

Supply only Maintenance Free Sealed Battery, 12 Volts, 12 AH Capacity complete all as specified and as directed.

Supply only COP made out of AISI 304 Grade Stainless Steel Sheet of minimum 1.2 mm thick [Scrolling Type] including Buttons, Lock, all other relevant features and wiring complete all as specified and as directed.

Supply only LOP made out of AISI 304 Grade Stainless Steel Sheet of minimum 1.2 mm thick [Scrolling Type] including Buttons, Lock, all other relevant features and wiring complete all as specified and as directed.

Supply only over speed governer pully of 10 passenger lifts with 1.5 Mps serving G+14 with a travel of 45 meters for mechanical safety complete all as specified and as directed.

Supply only over speed governer pully of 2000 Kg goods lifts with 0.5 Mps serving G+14 with a travel of 45 meters for mechanical safety complete all as specified and as directed.

Supply only Stainless Steel False Ceiling including 4 Nos. of 8 Watt LED Downlights as in indirect lighting and one No. fan grill suitable for 8 Passenger Lifts complete all as specified and as directed.

Supply only Main motor sheave four groves and 540 mm dia, speed 1.5m/s for passenger lifts complete all as specified and as directed.

Supply only Main motor sheave four groves and 640 mm dia, speed 0.5m/s for goods lifts complete all as specified and as directed.

Supply only Defelector Pulley five groves and 540 mm dia for passenger lifts complete all as specified and as directed.

Supply only Main Hoist Steel Rope of size 13 mm, Heavy Duty complete all as specified and as directed.

Velox Engineering Solutions Pvt Ltd

SANTOSH CONSTRUCTIONS