Development of Garbage dumping yard at Chand Pur Sunder Nagar Distt Mandi HP Sub Head CO Hazard waste collection center

Amount

Excavation in foundations, trenches etc. in all types of earth work, lift upto all height stacking the excavated soil not more than 3.00 meters clear from the edge of the excavation and then returning the stacked soil in 15 centimeters layers, when required into plinths sides of foundation etc. Consolidating each deposited layer by ramming and watering and disposing of all surplus excavated earth as directed within all leads and all lifts including carriage by mechanical transport( Any damage to public/ private property during excavation cutting will be born by the contractor).

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8(1 cement:4 sand:8 graded stone aggregate 40mm nominal size) and curing complete excluding cost of form work in foundation and plinths including all leads and and lift including all type of carriage. (Crushed/broken stone aggregate to be used)

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30xx5mm so as to give a fair finish including cantering, shuttering and propping etc. with wooden battens and ballies, height of propping and centering bellow supporting floor to ceiling not exceeding 4 mtr. And removal of the same for insitu-re-inforced concrete & plain concrete work within all leads and all lifts including carriage by mechanical transport Foundation footings bases of columnws etc and mass concrete.

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30xx5mm so as to give a fair finish including cantering, shuttering and propping etc. with wooden battens and ballies, height of propping and centering bellow supporting floor to ceiling not exceeding 4 mtr. And removal of the same for insitu-re-inforced concrete & plain concrete work within all leads and all lifts including carriage by mechanical transport: (Crushed/broken stone aggregate to be used) Square, rectangular or polygonal in plan

Providing and laying mechanically mixed and vibrated cement concrete work1:1 1/2:3(1 cement:1 1/2sand:3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including all leads and and lift including all type of carriage. (Crushed/broken stone aggregate to be used) in : Foundation footings, bases of columns and like and mass concrete.

Providing and laying mechanically mixed and vibrated cement concrete work1:1 1/2:3(1 cement:1 1/2sand:3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work including all leads and and lift including all type of carriage. (Crushed/broken stone aggregate to be used) in: Columns pilers posts and struts upto floor two level.

Steel work welded build up sections, trusses and framed work, including cutting, hosting fixing in position and applying a priming coat of red lead paint in beams joists channels, angles,tee, flats with connecting plates of angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like including all leads and and lift including all type of carriage.

Providing and fixing 0.60 mm thick prepainted steel sheet in roofing with hot diped metallic zinc coated sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 microns over 5 microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm diameter with prepainted limpets and rubber washers complete with accessories as required as per the direction of Engineer Incharge. within all leads and all lifts including carriage by mechanical transport(

Providing and fixing ridge or hips 60cm over all with 0.60 mm thick prepanted steel sheet in roofing with hot diped metallic zinc coated sheet with top coat of regular modified polyester(RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyester of 5 microns over 5 microns primer coating including fixing with preprinted iron J or L hooks, bolts and nuts 6mm diameter with prepainted limpets and rubber washers complete with accessories as required as per the direction of Engineer Incharge. within all leads and all lifts including carriage by mechanical transport

Providing and fixing M.S. BP Sheet 1.66 mm to 2mm thick in eavProviding and fixing M.S. BP Sheet 1.66 mm to 2mm thick in eaves board/facia/soffits/ceiling including cutting, fixing and bending to steel roof members and applying a coat of red lead primer complete as per the instruction of engineer in charge( Base members of steel work shall be measured and paid separately)es board/facia/soffits/ceiling including cutting, fixing and bending to steel roof members and applying a coat of red lead primer complete as per the instruction of engineer in charge( Base members of steel work shall be measured and paid separately) within all leads and all lifts including carriage by mechanical transport

Supplying and fixing wovenplains G.I. wire 3.15 mm thick corresponding to SWG-8 fencing of mesh 50mm to 50mm to any type of standard rails, strainging bolts. etc. including provision of binding wire, staples etc including all leads and and lift including all type of carriage.

Random rubble masonry/polygonal rubble masonry(uncoursed/broughrt to courses) with hard stone of approved quality in foundation and plinths including leveling up with cement concrete(1 cement:6 sand:12 graded stone aggregate 20mm nominal size) including all leads and and lift including all type of carriage. in cement mortar 1:6 (1cement:6 sand) in foundation and plinth.

2nd class brick work using common burnt clay building bricks in super structure above plinthnlevel upto floor two level including all leads and and lift including all type of carriage. in cement mortar 1:6(1cement:6 sand)

Stone soling properly hand packed filling interstices with Kharanja stone and consolidating with power roller to the required gradient and camber including spreading watering and rolling of binding materials moorum for earth etc complete as per HPPWD specification including all leads and and lift including all type of carriage.. 100mm spread thickness( finished work including materials and labour)

Filling in plinth with sand under floors including watering, ramming, consolidating and dressing complete including all leads and and lift including all type of carriage.

Providing and laying 40 mm thick cement concrete flooring 1:2:4(1 cement:2sand:4graded stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement including all leads and and lift including all type of carriage.

Providing and fixing Oxidised MS sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete.300x16mm

Providing and fixing M.S. bright finished nickel plated pull bolt lock with necessary screws etc. complete.

PAWAN SHARMA

rajesh kumar