PROVISION OF COVERED SHED AND CONNECTED WORKS AT CGRA KOZHIKODE

Amount

Excavation in trenches not exceeding 1.5 M wide and n. exc 1.5 M depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 M wide and exc 1.5 M n. exc 3 M depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 3 m in depth and getting out in soft/loose soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5 M wide and n. exc 1.5 M depth for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in hard/dense soil complete all as specified and as directed.

Material and labour for Plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work all as specified and as directed.

Material and labour for reinforced cement concrete design mix M-30 using 20 mm graded granite stone aggregate in foundaions including rafts, footings, foundaion beams, plinth beams, bases for columns etc, basement slabs, underreamed piles and mass concrete all as specified and as directed. Note : Reinforcement and form work shall be measured and paid separately.

Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in as in beams, cantilever, lintels over 1.5M span etc complete all as specified and as directed.

Material and Labour for reinforced cement concrete M30 design mix using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed

Material and labour for TMT bars(CRS/HCR), 10mm dia and over cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire annealed not less than 0.9mm dia complete all as specified and as directed.

Material and Labour for TMT(CRS/HCR) bars 6 to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wires (annealed) not less than 0.9 mm dia or secured with clips complete all as specified and as directed.

Use and waste for form work to sides of concrete surfaces of columns/ pillars, square or rectangular in plan or roof beams, beam haunch-ings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc, fair finished flat surfaces of concrete all as specified and as directed.

Use and waste of formwork to sides of foundation footing, for rough finished surfaces, flat complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm complete all as specified and as directed.

Removing excavated soil to a distance not exceeding 50 metre away and depositing where as directed at a level not exceeding 1.5m above the starting point, complete all as specified and as directed.

Material and Labour for Granite 18 mm thick of any type work (table rubbed and polished including moulding, grinding ect), and laid over in steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like in over and including 15 mm thick backing coat in CM 1:4 and pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. NOTE: Material and Labour for rounding to edges of Granite slabs shall be measured and paid separately.

Material and Labour for FRP Mangalore pattern roofing tile of any colour & size in any direction and in any position fixed with self tapping screws over top of MS /Structural steel purlin etc complete all as specified and as directed

Supply and fix structural steel work in tubular trusses including special shaped washer complete using ERW or induction butt welded tubes conforming to IS - 1161-1979 grade St.-240 all as specified and as directed.

Supply and fix rolled mild steel in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe-410W(Gde E-250) quality A complete all as specified and as directed.

Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including necessary hangers 6mm dia GI up to1200mm length adjusting level fixed to roof slab by means of cleats made out of FI 40x3mm size 60 cm long and expansion holdfast 12.5mm dia 40mm long with and including PVC profile ceiling of surface laminated any pattern and any shade of 7 to 10 mm thickness and any colour completely all as specified and as directed.

Demolition of reinforced cement concrete of any description as in roof/landing/chajja/shelves and similar suspended work other than ground floor including taking down old roof tratment complete all as specified and directed.

Demolition of un-reinforced concrete in ground floors, pavings n.exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

Material and labour for 80mm thick machine pressed precast concrete interlocking paver block, any shape and size of M-40 grade conforming to IS 15658-2006 with grey cement and pigment laid over and including 50mm thick river sand cushioning, watering and consolidation in the same position complete all as specified and directed.

Material and labour for 100mm thick plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floors including necessary form work all as specified and as directed.

Material and labour for preparation of new or previously untreated steel surface over 10 cm width or girth and applying two coats of synthentic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fix mild steel bolts (Machine made) made with hexagonal or square head one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt exceeding 10 cm and not exceeding 15 cm and dia 11 to 15 mm complete all as specified and as directed.

Supply and fix mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with rivetted or bolted or welded attachment all as specified and as directed.

Material and labour ACP sheet clading with PVDF colour coated exterior grade aluminium composite panel of panel of 3 mm thick using high quality adhesive tape, filling the joint with high quality sealant and fixed over structural steel frame work all as specified and as directed.

Supply and fix in Stainless steel metalic Alphabet in capital letter size not less than 45 Cm in height , minimum thickness 75 mm and font will be in ARIAL BOLD TYPE and fixed to wall or on concrete/stone or any type of surface with screwed down or any objects to write any word or any statement for ornamntal purpose complete, all as specified and as directed.

Supply and fix in Stainless steel metalic Alphabet in capital letter size not less than 30 Cm in height , minimum thickness 75 mm and font will be in ARIAL BOLD TYPE and fixed to wall or on concrete/stone or any type of surface with screwed down or any objects to write any word or any statement for ornamntal purpose complete, all as specified and as directed.

Supply and lay cable XLPE 35 Sqmm 3.5 core, 1100 Volts grade, 415 volt, 50 Hz. insulated screened PVC bedded, galvanised steel strip or wire armoured, electric cable, heavy duty, 1100 volt grade with stranded aluminium conductor cables of following sizes fixed in wall/ roof or laying in trenches etc.complete all as specified and as directed.

Cutting the existing bituminous road/cement concrete surface to the required width and depth for laying UG cable/pipe and making good the disturbed surface of road/path to even surface to match with existing level of road using cement concrete 1:3:6 upto a thicknesss of 100mm and removing and depositing the debris to a place complete all as specified and as directed.

Supply and Fix High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 laid in trenches 80 mm bore with all acessoires for cable protection, complete all as specified and as directed.

Supply and fix Distribution board (DB) made out of sheet metal enclosure (CRCA sheet), dust and vermin proof, TPN 4 way, single door, IP-30 protection (4 + 12 module) TPN MCB, 415 V as incomer, SP/DP/TP/TPN as outgoing complete all as specified and directed . Make: Indo Asian /Leygrand/Havells

Supply and fix RCCB with earth leakage and overload proctection Four pole, 415 Volt, 63 A, 300mA complete all as specified and as directed. Make: Indo Asian /Leygrand/Havells

Supply and fix MCB SP 6-32 amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of single pole in the MCB DB,IP 20 transparent lebel holder fully insulated safety shutters suitable for cable up to 35 Sqmm cross sectional area complete including suitable size copper Lugs complete all as specified and directed. Make: Indo Asian /Leygrand/Havells

Material and Labour for point wiring complete using 1.5 Sqmm PVC insulated unsheathed copper conductor, stranded cable (FRLS) upto and including working voltage 1100volts grade, drawn through and including PVC casing and caping including all accessories ISI marked including press fit white PVC open switch/surface board high strength and crack resistance and unsheathed copper conductor stranded cable(FRLS) earth continuity wire connected to DBs/sunken boxes/fittings of size 1.5 Sqmm Cross sectional area and all other metal parts with earth dolly for the following:-. (a ) one light point controlled by one switch 5 Amps

(b ) one fan point point controlled by one switch 5 Amps

(c) One 3 pin socket outlet 5 Amps on Independent board

(d ) One 3 pin socket outlet 5 Amps on same board

All as per Item No. 35 above but with 4 sq mm PVC insulated copper conductor cable(FRLS) including 4 sq mm PVC copper conductor used as earth wire for power point on independent board for One 3 pin socket outlet, 15 Amps.

Supply and fix Modular switch one way 6A, 1 Module complete all as specified and as directed.

Supply and Fix Modular Switch 1 way, 16 Amps, 1 module complete all as specified and as directed.

Supply and Fix Modular Socket, 6 A- 2/3 pin combined 2 module complete all as specified and as directed.

Supply and Fix Modular Socket, 6/16 A- 6 pin combined 2 module complete all as specified and as directed.

Supply and fix Fan step regulator, 120 w, 2 module complete all as specified and as directed.

Supply and fix ceiling rose, 65x50mm 3 terminal,poly carbonate,isolated body white/any shade complete all as specified and as directed.

Material and labour for extension of ceiling fan Down rod of size 20 mm dia medium grade steel tub, for existing ceiling fan up to a length suitable to comes just below the false ciling including painting of two coat synthetic enamel paint over a coat of red oxide primer including necessary welding and drilling works complete all as specified and directed.

Earthing with Galvanized steel earth plate electrode of size 600mmX600mm, 6.00 mm thick buried directly in ground vertically to a depth not less than 2.25 metres below the normal ground level with top edge of the plate not less than 1.5m below normal GL and connected to galvanized iron strip of size 32 x 6 mm size by means of bolts, nuts, check nuts and washers of galvanized iron steel all as shown in Electrical Plate No.5 connecting to earthing test point, including necessary earth work in any type of soil, PCC earth chamber made in PCC 1:3:6 type C1 (using 20mm graded aggregate), common salt, charcoal, CI funnel, earth pit cover in RCC 1:2:4 type B1 (using 20mm graded aggregates), with 8mm CTD bars @ 100mm c/c in both ways, including necessary form work complete including necessry test on completion including taking out old earthing all as specified and as directed. Note : The unit rate shall also include for excavation, earth work in hard/dense soil PCC (1:3:6) type C1 pit, RCC cover slab, GI funnel with 40 mm dia watering pipe, wire mesh, 15mm dia light grade GI protection pipe for earth lead etc., complete

Material and labour for Sub main wiring using two runs of single core PVC insulated cable(FRLS) 4 sqmm copper conductor multi stranded and one run of 4 sqmm copper conductor insulated cable (FRLS)using as earth wire drawn through and including suitable size non metallic rigid PVC conduit not less than 25mm dia with accessories including taking down old aluminium/Copper Sub main wirng complete all as specified and directed. Note- 3 run of 4 sq mm PVC copper wire and One run of PVC conduit shall be measured and paid as one unit.

Supply only LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. Make: Havells/ Philips/Bajaj

Supply only LED light fitting mirror type with high out put diffuser 2 feet,10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. Make: Havells /Philips/Bajaj

Supply and fixing LED street/Security light fittings, new generation energy saving and environmental friendly long life versatile die-cast aluminium IP 66 luminaire with high power LEDs 200 watts heat resistant toughened glass with frame with necessary fixing arrangement of suitable fabricated arrangement made of flat iron/angle iron/heavy grade GI pipe with clamps, bolts, nuts and wahers all as specified and directed by the Engineer in charge. Make: Cat No : Endura Pearl Magnum Plus 200W HEE WTX of havells or Equalent in Crompton/Philips

Supply and fixing LED street/Security light fittings, new generation energy saving and environmental friendly long life versatile die-cast aluminium IP 66 luminaire with high power LEDs 120 watts heat resistant toughened glass with frame with necessary fixing arrangement of suitable fabricated arrangement made of flat iron/angle iron/heavy grade GI pipe with clamps, bolts, nuts and wahers all as specified and directed by the Engineer in charge. Make: Cat No : ENDURASUNDOWNSL 120 WLED765PASYBOTG of havells or Equalent in Crompton/Philips

Supply and fix energy efficient 5 star rated high speed BLDC ceiling fan with remote, 370RPM, 1200mm sweep, including motor-blade set, downrod, shackle, assembly kit, canopy , remote etc, Operating voltage 230 volt single phase complete all as specified and as directed. Make: Havells/Crompton Greaves/Usha.

Supply and fix Exhaust Fan of size 300 mm sweep with louvers, with plastic body AC 230 V, 50 Hz, and connecting to ceiling rose terminals with 23/.0076 flexible cable and making good the disturbed surface to match with existing finishes complete all specified and directed.

Schedule of Credit (Minus) Rs.350.00 NOTE: Bidder shall insert credit amount of Rs. 350.00 as rate in Green field under Col-13.

VIJAY CONSTRUCTIONS

M/s.Sai Agency

SHAIJAL T M