Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹75.0 LAccepted-AOC KUNNAPPILLIL BUILDING SOUTH MARADY P O MUVATTUPUZHA 686673 | MUVATTUPUZHA | ERNAKULAM | KERALA | 686673 | ₹75.0 L | L1 | Accepted-AOC L1 Bidder |
| 2 | L2₹80.9 L+₹5.9 L (7.84%)Rejected-AOC | ₹80.9 L+₹5.9 L (7.84%) | L2 | Rejected-AOC L2 Bidder |
| 3 | L3₹82.7 L+₹7.7 L (10.2%)Rejected-Finance | ₹82.7 L+₹7.7 L (10.2%) | L3 | Rejected-Finance L3 Bidder |
| 4 | L4₹83.9 L+₹8.9 L (11.9%)Rejected-Finance | ₹83.9 L+₹8.9 L (11.9%) | L4 | Rejected-Finance L4 Bidder |
| Sl No | Description | Qty | Unit | A one furniture L2 | SABROS DECOR SYSTEMS PVT. LTD. L4 | ABHIMAN INTERIORS & TURNKEY CONTRACTS PRIVATE LIMITED L3 | Ashly Furnishing Co Pvt Ltd L1 |
|---|---|---|---|---|---|---|---|
| 1.00Hospital - Furniture | |||||||
| 1.01 | Overhead storage unit: Supplying, fabricating and installing wall mounting storage units of varying dimensions, depth 400 mm, height ranging from 600 mm to 750 mm with following specification. 1.Panel:- 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2.All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. The back panel of the storage unit shall be 12 mm thick IS 710 BWP marine plywood with 1 mm thick lamination. 4. The hard ware includes 90 degree soft close hinges, multipurpose lock & D Handles. 5. The unit shall be assembled using a knockdown fittings system. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engr in Charge prior to fabrication and all works shall be completed as per the approval from the engineer in charge and as per the approved list of make. | 33.6 | sqm | 15,070 ₹5,06,352 | 14,000 ₹4,70,400 | 12,700 ₹4,26,720 Lowest | 14,000 ₹4,70,400 |
| 1.02 | Single sided Workstation Table: Supplying, fabricating and installing Single sided Workstation Table of size 600mm width and height ranging 750mm to 800mm and vertical leg support at 1200 mm intervals max. with following specification. 1. Top, leg and front panel: - 24mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. The front panel shall be 100 mm from the outer edge of the table and leg shall be in line with the outer edge. 2. Keyboard tray, CPU stand and footrest of 18mm thick IS 710 BWP marine plywood with hot/Cold press machine lamination of 1mm. Foot rest & CPU stand shall be 100 mm from the floor. 3. All visible edges shall be covered with 2mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The table should be assembled using a knockdown fittings system. The table shall be tailored to meet the specific requirements/site conditions. The measurement shall be on the basis of table length in running meter. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 102.45 | metre | 10,080 ₹10,32,696 | 12,000 ₹12,29,400 | 6,850 ₹7,01,782.5 Lowest | 10,250 ₹10,50,112.5 |
| 1.03 | Double sided Workstation Table: Supplying, fabricating and installing Double sided Workstation Table of size 1200mm width and height ranging 750mm to 800mm and vertical leg support at 1200 mm intervals max. with following specification. 1. Top, leg and front panel: - 24mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. The seperation panel shall be at center of the table and leg shall be in line with the outer edge. 2. Keyboard tray, CPU stand and footrest of 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1mm. Foot rest & CPU stand shall be 100 mm from the floor. 3.All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The table should be assembled using a knockdown fittings system. The table shall be tailored to meet the specific requirements/site conditions. The measurement shall be on the basis of table length in running meter. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make | 4.8 | metre | 14,968 ₹71,846.4 | 18,000 ₹86,400 | 6,305 ₹30,264 Lowest | 14,700 ₹70,560 |
| 1.04 | Dining Table: Supplying and installing Dining Table of size 1500 mm x 750 mm x 750 mm with following specification. 1.Top Panel: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. All visible edges shall be covered with 2 mm PVC edge banding . 3. Table frame: shall be fabricated with 50mm x 50mm x 2mm thick MS tube frame,supported by legs of 50mm x 50mm x 2mm thick MS tubes, tie member of size 40mm x 80mm x 2mm thick MS tube and all tubular members shall be powder coated with a minimum thickness of 60 microns, andfinished as approved. The contractor is required to submit shop drawings with all details of material,fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 2 | no | 12,400 ₹24,800 | 17,000 ₹34,000 | 7,750 ₹15,500 Lowest | 16,000 ₹32,000 |
| 1.05 | "Pedestal Unit with casters: Supplying, fabricating and installing Pedestal Unit of size 400 mmx 450mm x 700mm with following specification. 1.Panel: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. Drawers: 3 nos with soft close sliders,D handle and multipurpose lock. The bottom panel of the drawers shall be made of 9mm thick IS 710 BWP marine plywood and carcase for the drawers shall be made of 18mm IS 710 BWP marine plywood . 3. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The pedestal should be assembled using a knockdown fittings system. The casters are installed at the four corners for easy movement. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in charge and as per the approved list of make." | 61 | no | 7,040 ₹4,29,440 | 6,500 ₹3,96,500 Lowest | 8,800 ₹5,36,800 | 8,500 ₹5,18,500 |
| 1.06 | Managers table with drawer treated with hardwood: size 1525x760x760 mm | 4 | no | 18,010 ₹72,040 Lowest | 25,000 ₹1,00,000 | 21,000 ₹84,000 | 23,500 ₹94,000 |
| 1.07 | Medicine bin rack: Supplying and installing Medicine bin rack with length ranging from 600 mm to 900 mm, depth 400 mm, height 2100 mm with following specification. 1. Panel : - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. Rack includes GI Powder coated track to accommodate smooth operation of bins. Each unit requires approximately 60 bins. 2.All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5mm PVC edge banding. 3. The back panel of the storage unit shall be made of 9mm thick IS 710 BWP marine plywood with 1 mm thick interior lamination. 4. The unit shall be assembled using a knockdown fittings system. 5. The rack includes bottom storage of 600 mm height with doors and necessary soft close SS hinges, SS D handle and lock. Measurement shall be based on the facia area. The dimensions of the rack and track shall be subject to site conditions to accommodate inside bins. Bins will be paid separately. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 9.45 | sqm | 10,692 ₹1,01,039.4 | 15,000 ₹1,41,750 | 9,800 ₹92,610 Lowest | 10,500 ₹99,225 |
| 1.08 | Medicine Plastic Bin: Supplying and installing high quality Medicine Bin of size 140 mm length x 110 mm height x 350 mm depth with single partitions inside the bin and necessary fittings as approved by the Engineer in charge. | 200 | no | 260 ₹52,000 | 350 ₹70,000 | 60 ₹12,000 Lowest | 350 ₹70,000 |
| 1.09 | Back Panelling for overhead storage units: Supply and fabrication of side panelling for overhead storage,bridging the gaps between storage units and the wall/columns with following specification. 1. Panel: -12mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick colour/shade shade shall match with the storage . 2. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. Panel shall be fixed using the means of L bracket which shall not be visible from outside. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material,fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 8 | sqm | 1,048 ₹8,384 Lowest | 2,700 ₹21,600 | 4,000 ₹32,000 | 5,000 ₹40,000 |
Tender Value
₹88.9 L
EMD Value
₹50,000
Closing Date
10 Mar 2026, 3:00 pmClosed
Managing Director, INKEL Limited
1st Floor, Ajiyal Complex, Post Office Road, Kakkanad, Cochin - 682030
Interior Furnishing works
2026_INKEL_839902_1
NIT/INKEL/KIIFB/2025-26/172 dated 24/02/2026
Open Tender
Miscellaneous Works
Item Rate
90 days
THQH Chirayinkeezhu
As per Tender Document
12 documents required · 12 mandatory
₹2,950
₹50,000
31 Aug 2026
24 Feb 2026
12 Mar 2026
25 Feb 2026
10 Mar 2026
3 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Hospital - Furniture | |||||
| 1.01 | Overhead storage unit: Supplying, fabricating and installing wall mounting storage units of varying dimensions, depth 400 mm, height ranging from 600 mm to 750 mm with following specification. 1.Panel:- 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2.All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. The back panel of the storage unit shall be 12 mm thick IS 710 BWP marine plywood with 1 mm thick lamination. 4. The hard ware includes 90 degree soft close hinges, multipurpose lock & D Handles. 5. The unit shall be assembled using a knockdown fittings system. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engr in Charge prior to fabrication and all works shall be completed as per the approval from the engineer in charge and as per the approved list of make. | - | sqm | 1.25 | - |
| 1.02 | Single sided Workstation Table: Supplying, fabricating and installing Single sided Workstation Table of size 600mm width and height ranging 750mm to 800mm and vertical leg support at 1200 mm intervals max. with following specification. 1. Top, leg and front panel: - 24mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. The front panel shall be 100 mm from the outer edge of the table and leg shall be in line with the outer edge. 2. Keyboard tray, CPU stand and footrest of 18mm thick IS 710 BWP marine plywood with hot/Cold press machine lamination of 1mm. Foot rest & CPU stand shall be 100 mm from the floor. 3. All visible edges shall be covered with 2mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The table should be assembled using a knockdown fittings system. The table shall be tailored to meet the specific requirements/site conditions. The measurement shall be on the basis of table length in running meter. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | - | metre | - | - |
| 1.03 | Double sided Workstation Table: Supplying, fabricating and installing Double sided Workstation Table of size 1200mm width and height ranging 750mm to 800mm and vertical leg support at 1200 mm intervals max. with following specification. 1. Top, leg and front panel: - 24mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. The seperation panel shall be at center of the table and leg shall be in line with the outer edge. 2. Keyboard tray, CPU stand and footrest of 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1mm. Foot rest & CPU stand shall be 100 mm from the floor. 3.All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The table should be assembled using a knockdown fittings system. The table shall be tailored to meet the specific requirements/site conditions. The measurement shall be on the basis of table length in running meter. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make | 1 | metre | - | - |
| 1.04 | Dining Table: Supplying and installing Dining Table of size 1500 mm x 750 mm x 750 mm with following specification. 1.Top Panel: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. All visible edges shall be covered with 2 mm PVC edge banding . 3. Table frame: shall be fabricated with 50mm x 50mm x 2mm thick MS tube frame,supported by legs of 50mm x 50mm x 2mm thick MS tubes, tie member of size 40mm x 80mm x 2mm thick MS tube and all tubular members shall be powder coated with a minimum thickness of 60 microns, andfinished as approved. The contractor is required to submit shop drawings with all details of material,fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | - | no | - | - |
| 1.05 | "Pedestal Unit with casters: Supplying, fabricating and installing Pedestal Unit of size 400 mmx 450mm x 700mm with following specification. 1.Panel: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. Drawers: 3 nos with soft close sliders,D handle and multipurpose lock. The bottom panel of the drawers shall be made of 9mm thick IS 710 BWP marine plywood and carcase for the drawers shall be made of 18mm IS 710 BWP marine plywood . 3. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The pedestal should be assembled using a knockdown fittings system. The casters are installed at the four corners for easy movement. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in charge and as per the approved list of make." | - | no | - | - |
| 1.06 | Managers table with drawer treated with hardwood: size 1525x760x760 mm | - | no | - | - |
| 1.07 | Medicine bin rack: Supplying and installing Medicine bin rack with length ranging from 600 mm to 900 mm, depth 400 mm, height 2100 mm with following specification. 1. Panel : - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. Rack includes GI Powder coated track to accommodate smooth operation of bins. Each unit requires approximately 60 bins. 2.All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5mm PVC edge banding. 3. The back panel of the storage unit shall be made of 9mm thick IS 710 BWP marine plywood with 1 mm thick interior lamination. 4. The unit shall be assembled using a knockdown fittings system. 5. The rack includes bottom storage of 600 mm height with doors and necessary soft close SS hinges, SS D handle and lock. Measurement shall be based on the facia area. The dimensions of the rack and track shall be subject to site conditions to accommodate inside bins. Bins will be paid separately. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 1 | sqm | - | - |
| 1.08 | Medicine Plastic Bin: Supplying and installing high quality Medicine Bin of size 140 mm length x 110 mm height x 350 mm depth with single partitions inside the bin and necessary fittings as approved by the Engineer in charge. | - | no | - | - |
| 1.09 | Back Panelling for overhead storage units: Supply and fabrication of side panelling for overhead storage,bridging the gaps between storage units and the wall/columns with following specification. 1. Panel: -12mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick colour/shade shade shall match with the storage . 2. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. Panel shall be fixed using the means of L bracket which shall not be visible from outside. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material,fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | - | sqm | - | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.21 MB
Drwng.pdf
Tender Documents • 2.24 MB
BOQ_1415555.xls
BOQ • 0.36 MB
Tenderdoc.pdf
Tender Documents • 0.91 MB
Corrigendum1.pdf
PDF • 0.12 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .