Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹46.0 LAccepted-AOC 274 210 DAFNALA ROAD SHAHIBAUG AHMEDABAD GUJARAT 380009 | AHMADABAD | GUJARAT | 380009 | L1 | Accepted-AOC ACCEPTED BEING LOWEST QUOTED | |
| 2 | L2₹50.0 L+₹3.1 L (6.69%)Rejected-AOC | L2 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED | |
| 3 | L3₹50.1 L+₹3.2 L (6.86%)Rejected-AOC | L3 | Rejected-AOC NOT ACCEPTED DUE TO HIGHER RATE QUOTED |
Tender Value
Refer Docs
EMD Value
₹87,000
Closing Date
14 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE ARMY GANDHINAGAR
GE GANDHINAGAR PO BSF CAMPUS GANDHINAGAR 382045
ADDITION ALTERATION TO BLDG NO P 14 QTR 01 TO 08 AT MIL STN DHRANGADHRA
2022_MES_564227_1
GE(A)/GNR/TOKEN/68 of 2022-23
Open Tender
Civil Works
Item Rate
120 days
MIL STN DHRANGADHRA
AS PER TENDER DOCS
6 documents required · 6 mandatory
₹500
GE ARMY GANDHINAGAR
₹87,000
Yes
30 Jan 2023
19 Nov 2022
16 Dec 2022
19 Nov 2022
14 Dec 2022
2 Dec 2022
19 Nov 2022 - 30 Nov 2022
Amount
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
M&L, Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular), area of each tiles exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc. set & jointed in net cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1:6 complete as specified and directed.
M&L, Non-skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed
M&L for coloured glazed ceramic tiles of size350x250x7mm/450 x 350 x 7mm thick on vertical surface such as skirting/dado, set and jointed in net cement slurry and pointed in colour cement to match ver 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
Dismantling stone slab and tiles of any description or thickness in floors,aprons etc. complete all as specified and directed.
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc and including 15mm thick screed bed in CM 1:6 complete as specified and directed.
M&L for kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing etc and including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.
M&L for 18-20mm thick black granite stone slab machine cut in skirting/dado, cooking platform, jams, pillars, windows cills and the like laid over and including 10mm thick screed bed or backing coat in cement mortar (1:4) and jointed with grey cement slurry and pointed with white cement and with admixture or pigment to match the shade of granite stone including grinding and polishing complete all as specified & directed.
M&L for rounding to edges of stone slabs two edge full round,such as in steps,cooking platform and other similar situation complete all as specified and directed.
Demolition of cement concrete (Un-reinforced) in ground floors n.exc 15cm thick (above or below grnd level) complete all as specified and directed.
M&L for factory made Pre-cast cement concrete kerb stone masonry type B-1, 1:2:4 (20mm graded stone aggregate) with solid block exc 10cm and set in CM 1:6 complete all as specified and directed.
M&L for 25mm thick cement concrete type B1, 1:2:4 (20mm graded stone aggregate) to receive floor finishes complete all as specified and directed.
M&L for 50mm thick cement concrete 1:3:6 type C1, using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surfaces even and smooth without using extra cement complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) completed as specified and directed.
M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) completed as specified and directed but except stone complete all as specified and directed.
Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface n. exc 20mm for sand stone and dressing to face stones and dressing of face beds and joints, as specified, of random rubble walling, uncoursed or brought upto courses completed as specified and directed.
M&L for cement concrete 1:3:6 type C1 using 20mm graded stone aggregate as in coping, including necessary formwork etc complete.
M&L for precast cement concrete block masonry ,type B-1 1:2:4 (20mm graded aggregate) set in cement mortar 1:4 with solid blocks exc. 10cm in width and setting in mortar, complete all as specified and directed.
M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
Taking down cement plaster from brick or stone walls incl racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.
M&L for rendering 15mm thick cement plaster 1:6 on stone masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick cement plaster 1:4 on stone masonry surface or surface other than fair face of brickwork surface finished even and smooth without using extra cement complete all as specified and directed.
M&L for preparation of new surfaces of plastered or unplastered of wall and application of three coat of white washing complete all as specified and directed.
M&L for preparing of new plastered or un-plastered surfaces and applying two coats of oil bound distemper over a coat of primer over and including wall care putty complete all as specified and directed.
M&L for preparation of new plastered surfaces of wall and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
Dismantling of asbestos cement (corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding wall, fixed with self tapping screws complete all as specified and directed.
S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed.
S&F mild steel rolled section Fe-410-W(Gde E-250), quality 'A' as in post, main and cross beams, rafters, purlins connected to common rafters fixed with angle iron clips or other connecting plates complete all as specified and directed.
M&L for PCC 1:2:4 type B2 using 40mm graded stone agreegate as in bed blocks complete all as specified and directed.
M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
Dismantling timber scantling 40 sqcm and over in section, an any position (framed) complete all as specified and directed.
Ditto all as per item No 40 above but fillet rails, post rafter purlin etc under 40 sq cm in section (unframed) complete all as specified and directed.
S&F, in repairs, false ceiling at any height, 600x600mm grid with Armstrong 'Prelude XL 32' grid system and 16mm thick mineral fibre acoustic tile 'RH-99 classic lite' with suspension system complete all as specified as per manufacturer's instruction. Make : Armstrong or equivalent as approved by GE.
Taking down chowkats or frame of any descrip tion exc 1.5 Sqm each and n.exc 4 Sqm (without taking off shutters from the frames) complete as specified and directed.
S&F, MS angle iron framed work as in doors or gates of angle or other section conforming to Fe 290(Gde E-165) with gusset plates, rails, braces, etc complete including hanging also fastening and fixing complete as specified and directed.
Cutting holes into or through stone walls built in cement mortar or cement lime mortar and walls of cement concrete having superficial area exc 150 sq.cm but n exc 400 sq.cm complete all as specified and directed.
Providing, cement concrete type B0 1:2:4 (12.5mm graded aggregate) in copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating as directed.
S&F, 35mm thick, second class HW in glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass, etc. size of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) supplied and fitted to chowkats complete all as specified and directed by Eng-in-Charge.
S&F 35 mm thick, 2nd class hard wood factory made, plain, framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube, supplying and fixing in opening as per specifications and drawings complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed by Eng-in-Charge.
Taking down chowkats or frame of steel window/ ventilator n exc 1.5 Sqm each (without taking off shutters from the frames) complete as specified and directed.
M&L for anodised aluminium frame/shutters for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.
S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks ad similar work conforming to Fe 290, Gde-E-165 complete all as specified and directed.
S&F 4mm thick Sheet glass, ordinary quality with and including neoprene beadings in square nexc 0.5 sq.m in each pane
S&F, stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed to wooden door Shutters/aluminium sliding shutters complete all as specified and directed.
S&F Glazing with sheet, 3mm thick, ordinary quality and glazing with oil putty and glazing pins in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.
M&L for preparation of new wooden surface of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.
M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparation of new steel surface of any description exc. 10cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed.
S&F, in repairs, 250mm length of bolt aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cost or extraded sections and fixing bolts and sliding bolts of extraded sections or cost aluminium alloy.
S&F, in repairs, 150mm size, aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F, in repairs, aluminium, anodised barrel tower bolt of extruded section and fixed 200 mm of size complete all as specified and directed.
S&F, in repairs, 150mm long floor door stopper of aluminium alloy body and tongue with hard drawn steel springcomplete all as specified and directed.
S&F butt hinges, medium weight, cold rolled, mild steel of size 100 mm complete all as specified and directed.
S&F, in repairs, 18/19mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice laminations and other side balancing white lamination, fixed with screws to timber frame work in cup boards, rebated or flat edged complete all as specified and directed.
M&L for 6mm thick external teak wood lipping fixed to18/19mm thick block or Veneered particle boards with nails complete all as specified and directed.
S&F continuous (piano) hinges, mild steel bright finish or electrogalvanised, width of flap 40 mm complete all as specified and directed.
S&F hasp & staples 125mm in size, safety type alu. anodised fixed with screws complete all as specified and directed.
S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.
S&F 100 mm size extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.
S&F, in repairs, 20mm dia,stainless steel, fancy type, tubular curtain rod fix on decorative brackets with decorative globe at both ends complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, such as manholes cover etc complete all as specified and directed.
M&L for providing precast cement concrete type C1, 1:2:4 (20mm graded aggregate) in landings, cover slabs(for manholes etc) with plain fair faces, including chamfers, weathering, throating etc and setting in cement mortar 1:6 complete with joints to match complete all as specified and directed.
S&F mild steel TMT bars 6 to 8mm dia and over, cut to length, bent to shape required, inclding cranking, bendiing spirally for hooping for columns, hooking ends and biinding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F, in repairs, vitreous china squatting pan, 'Orissa’ pattern, white of size 580mm x 440mm with integral foot rest, P or S trap (excluding flushing cistern and flush pipe) complete all as specified and directed.
S & F in repairs white glazed earthen ware vitreous china wash hand basin of size 550x400mm with and including CI brackets, 32mm bore brass CP waste coupling Inlet/ outlet, PVC flexible pipe, 600mm size for 15 mm bore pipe with brass nut and washers etc complete.
S&F, in repairs, 10 litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet ball valve, float and handle including brackets and connection to pipe or lever etc. complete all as specified and directed.
S&F in repairs 32mm waste fittings brass chromi-um plated for glazed ware basin etc with long screwed shanks and fly nuts flange end complete ISI marked complete all as specified and directed.
S&F, in repairs, 15mm brass chromium plated fancy type bib cock with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.
S&F, in repairs, 15mm stop valves, fancy type brass chromium plated for iron pipe or for unions and fixed to 15mm bore pipe, complete all as specified and directed.
Supply only 15mm pillar taps, brass chromium plated fancy type with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe or for union and fixed to 15mm bore pipe, complete all as specified and directed.
S&F, in repairs, brass chromium plated, tubular towel rail 20mm dia, D type, 60 cm long between flange complete all as specified and directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F, in repair, kitchen sink with drainage board made of stainless steel 1mm thick including supply and fixing 32mm CP waste coupling, plug, washer, 32 mm bore and 60cm long PVC waste pipe including cantilever brackets made of mild steel duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, cutting for and pinning in ends of brackets to errecting stand into wall, over all size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed.
S&F in repairs, 0.63mm thick, stainless steel plate rack of size 120cm x 90cm x 18cm complete all as specified and directed.
Supply only PVC waste pipe 32mm bore of size 900mm to 1200mm long complete all as specified and directed.
S&F, in repairs, chromium plated over head shower 125mm size with or without swivel joints, including fixing to pipe or union complete all as specified and directed.
S&F, in repair, brass, chromium plated, soap dish complete all as specified and directed. Make - Jaquar or equivalent as approved by GE
S&F, in repair, PTMT, Grating, 150mm size(minimum wt 100gms) with hole for waste pipe fixed with cement mortar complete all as specified and directed.
S&F, 20mm bore, ball valves high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed complete all as specified and directed.(Minimum weight -210 Gms) complete all as specified and directed.
S&F in repairs rotational moulded polyethylene water storage tanks of capacity 500 Litres (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR-Part-I including disconnecting and removal of old U/S PVC tank complete all as specified and directed.
Taking up or down steel tubing and connections for 15mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connections for 20mm bore of pipe complete all as specified and directed.
Taking up or down steel tubing and connections for 25mm bore of pipe complete all as specified and directed.
S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 15mm bore of pipe complete all as specified and directed.
S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 20mm bore of pipe complete all as specified and directed.
S&F steel water tubes, medium grade, galvanized, with all fittings and fixed to walls and ceilings or laid in floors for 25mm bore of pipe complete all as specified and directed.
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 15mm bore of pipe complete all as specified and directed.
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 20mm bore of pipe complete all as specified and directed.
Refixing old serviceable steel tubing and connections in new or old position (walls, ceilings, floors etc.) for 25mm bore of pipe complete all as specified and directed.
S&F 32mm bore, low density polyethelene pipe(LDPE) of pressure rating 6Kgf/Sqcm fixed to wall, ceilings or in floors etc complete all as specified and directed.
Dismantling of cast iron , SGSW, PVC or reinforced concrete drain pipes jointed in neat cement mortar and taking out of trenches if required.
S&F 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/ walls complete all as specified and directed.
S&F 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ring joints laid in trenches or in floors/walls complete all as specified and directed.
S&F PVC (SWR) bends of any radius with oval and access door of 75mm dia complete all as specified and directed.
S&F PVC (SWR) bends of any radius with oval and access door of 110mm dia complete all as specified and directed.
S&F PVC (SWR) vent cowl of 110mm dia complete all as specified and directed.
S&F PVC (SWR) Floor/ Nahani trap with grating of diameter of outlet 75mm including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and directed.
S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete fixed all as specified.
Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc for manholes,septic tanks,wells etc not exceeding 10 sqm on plan and not exceeding 1.5m in depth and getting out Hard dense of soil complete all as specified and directed.
Returning, filling in, including, levelling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and directed.
Removing excavated material n.exc 50m and depositing where directed at a level n.exc 1.5 above the starting point complete all as specified and directed.
Demolition and breaking up drain pipes (salt glazed stoneware, AC or reinforced concrete), set in cement mortar for 200mm bore of pipe complete all as specified and directed.
M&L cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) in bed to drain pipes including packing under and haunching against the side of pipes after they are laid and tested for 200mm internal dia of pipe complete all as specified and directed.
M&L salt glazed stone ware (SGSW)drain pipes laid in tenches and jointed specified in size of pipe is Grade 'A' 200 mm internal dia of pipe complete all as specified and directed.
Cuting into existing manholes for connecting new drain making good to pipes and rendering, cutting out existing benching forming branch channel 1/2 round 3/4 section in cement conrete 1:2:4 type B1 smooth finished for 200mm bore pipe complete all as specified and directed.
Taking down carefully unserviceable copper/aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.
Taking down carefully old UNSV submain wiring of any type/any size removing material to store for keeping in safe custody or for taking credits (credit for above items should be made as per condition seperately).
M&L for wiring with and including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. complete all as specified and directed for the following :-
(a) One light/cealing fan/ Exhaust fan point controlled by one switch
(b) One 3 pin, 5 Amps, socket outlet on the same board controlled by another switch.
(c) One multi pin 5 Amps, socket outlet on Independent board.
(d) One bell/ buzzer point controlled by one push buttons independent
M&L for wiring with and including multistranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number drawn in and including medium grade PVC casing and capping double lock type 32mm in size, fire resistant, ISI marked including with its fittings and fixtures such as tees, bends, elbows, junction boxes, etc. including multistranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLS cable 1100 Volts grade, ISI marked with valied CML number as continuity earth wire and including pressed steel sunken concealed terminal box with 3mm thick industrial laminated sheet cover for mounting switches, sockets and fan regulators etc. for one 3 pin, 15 Amps socket outlet point on independent board complete all as specified and directed.
S&F, lamp holder, PVC/Polycarbonate, with back plate suitable for batten fittings complete all as specified and directed
S&F, switch piano, flush button, single pole, one way, 5 Amps complete all as specified and directed
S&F, bell push, flush type 5 Amps complete all as specified and directed.
S&F, switch piano, flush button, single pole, one way 15 Amps complete all as specified and directed
S&F, socket outlet, 2 in 1, 3 pin, 5 Amps, flush type complete all as specified and directed
S&F, socket outlet, 2 in 1, 3 pin, 15 Amps and 5 Amps flush type complete all as specified and directed
Taking down the existing ceiling fans complete with down rods and refixing the same with supply of new down rod of size 15 mm dia made of GI pipe med grade aprox 1 metre length incl flexible wire all as specified and directed.
Taking down the existing Kwh Meter complete with wooden board and refixing the same with supply of new wooden board of sutaible size inclu refixing of connection wire all as specified and directed.
S&F, ceiling fan step type regulator,AC 230 Volts complete all as specified and directed.
S&F, bell, A.C. 230 Volts, single pole, Ding doll, complete all as specified and directed.
S&F, in repairs, sheet metal distribution board, SPN, 8 way 240 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed.
S&F, in repairs, sheet metal distribution board, 3 phase with neutral ( TPN ) of 4 way 415 Volt, double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed.
S&F, ceiling rose, 3 terminal , any shade, of PVC/Polycarbonate, isolated body complete all as specified and directed.
S&F, in repairs, miniature circuit breakers, type curve ‘B’ , 10 KA, SP, 6 to 32 Amps complete all as specified and directed.
S&F, in repairs, miniature circuit breakers, Single pole and neutral, type curve ‘B’ 10KA, 32 Amps 230 Volts. complete all as specified and directed.
S&F, Distribution Board Power line VTPN, 4 way, 415 volts, factory made powder coated, double door with neutral and earth link, including 3 pole MCCB 63 Amps rating, 10KA breaking capacity for incoming supply and including 12 Nos single pole MCBs 6 Amp to 32 Amp 'B' series for outgoing supply complete all as specified and directed. As per Cat No DSDLVDRBAOFO04 of Standard or equivalent make approved by GE from the make specified in Appx 'C'.
S&F, in repairs, sub-main wiring with 2 single core, 4 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper multi stranded conductor drawn in and including PVC casing and caping of 32mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLS, copper conductor multi stranded, 4 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed. Note: 2 runs of main conductor, one run of earth conductor and one run of PVC casing and caping shall be measured as one unit length complete all as specified and directed.
S&F, in repairs, LED light fitting, batten type, housed in extruded from powder coated aluminium, 18 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.
S&F, in repairs, LED Mirror light fitting, housed in extruded from powder coated aluminium, 10 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.
M&L, in repairs, earthing complete with galvanized steel earth plate electrode of 60 cm x 60 cm x 6mm thick buried directly in ground [earth pit not less than 2.25 metre deep below normal ground level] with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized earth wire of 4mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel all as shown in electrical plate No. 3 of MES SSR Part I all as specified and testing on completion including provision of earth lead protected by 15 mm dia light grade GI pipe & watering pipe shall be 20 mm bore medium grade GI pipe including all excavation and earth work in any type of soil, PCC pit with RCC cover, char coal, salt, funnel etc complete. Note : Rate quoted by tenderers shall be deemed to include for following provisions;-[i]. Excavation & earth work in any type of soil including removing of surplus material upto 50 M.[ii]. PCC 1:3:6 type C1 using 20mm graded stone aggregate in pit & 40mm thick precast RCC 1:2:4 type B1 cover 50x50 cm with 8mm TMT bars @ 10 cm C/C both ways with handles.[iii]. Main earthing lead from earth electrode to test point upto 7.5 mtr.[iv]. Funnel with watering pipe [GI pipe] 20mm bore [ISI marked] medium grade & copper lugs, charcoal & salt as reqd.[v]. GI protection pipe of size 15 mm bore light grade 7.5m.
S&F security light luminaries 25 watt with wall mounting bracket of suitable size and clamps, nut bolts etc.having pressure die cast housing with epoxy power coated dark graphite grey colour finish,prismatic polycarbonate cover with individual LED lenses-IP65 prewired Conforming to Crompton of equivalent make of wipro/Havells/Philips wipro.
Excavation in trenches in soft / loose soil n . exc 1.5 mtrs wide and not exceeding 1.5 mtrs depth for taking out / laying of under ground cables and getting out all excavated materials with bricks bats etc as directed .
Returning, filling in, trenches with soft/ loose soil including spreading levelling watering and well ramming in layers not exc 25 cm with excavated soil complete all as directed.
Removing surplus spoil to a distance not exc 50 mtr away and depositing where directed at a level n.exc. 1.5 mtr above the starting point complete all as specified.
M&L for Sand coarse filling in trenches obtained from local river for cushioning of UG cable all as specified and directed .
Supply and laying well burnt best quality locally available bricks of good tolerance laid flat for protection of UG cable all as directed .
M&L tubing GI tubing light grade laying for protection of LT under ground cable of size 40 mm bore.
Supply, laying, connecting and testing of LT under ground electric cable 10 sqmm, 4 core,XLPE insulated armoured heavy duty with stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape 1100 Volts grade , laid in trenches or drawn through GI pipe or fixed to wall with providing suitable size of metal clamps, cable glands, aluminium lugs, GI nuts bolts and washers complete wherever required complete all as specified and as directed .
M&L for GI water tubing, medium grade laid in trenches/ on wall etc with running fittings complete for size 40mm dia of pipe. Make of GI Steel Water Tubing- TATA/JINDAL/SURYA. Make of GI FITTINGS- Only ISI marked Fittings.
M&L for GI water tubing, medium grade laid in trenches/ on wall etc with running fittings complete for size 25mm dia of pipe. Make of GI Steel Water Tubing- TATA/JINDAL/SURYA. Make of GI FITTINGS- Only ISI marked Fittings.
M&L for GI water tubing, medium grade laid in trenches/ on wall etc with running fittings complete for size 20mm dia of pipe. Make of GI Steel Water Tubing- TATA/JINDAL/SURYA. Make of GI FITTINGS- Only ISI marked Fittings.
S&F gun metal gate valve with iron wheel head, both ends screwed of size 40mm dia complete all as specified and directed.
S&F gun metal gate valve with iron wheel head, both ends screwed of size 25mm dia complete all as specified and directed.
M&L for construction of brick masonary valve pits of size 600x600x600mm (internal dimension) with brick work in cement mortar (1:4) including excavation and earth work, Concrete work, 3mm thick MS sheet cover with locking arrangement, hinges and handle incl angle iron frame, rendering work, painting to all steel surfaces with two coats of black bituminous paint over a coat of red oxide primer complete and including demolition of existing damaged valve pit .
M&L for cutting of existing CI/GI Pipe line for taking branch connecting by necessary cutting/welding work,providing GI fittings such as tee/reducers etc upto 100 mm bore complete including necessary earth work complete all as directed at site.
Shree Builders
SNEH TRADERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .