Repairs to 250 suction line, foot valve and pump and at electrical work at Lift Irrigation Scheme Unisoo new of MISD Handwara.

Amount

Complete dismantling of 250 mm dia suction line/foot valve including removal of 250mm dia foot valve of horizontal pumping unit by way of cutting of rusted nuts bolts at flanged joints using oxyacetylene gas cutter. Extraction, dragging of entire suction line along steep river bank by deploying various tools and tackles for repairs at site.

Repairs to the damaged MS tail piece pipe by way of welding works approx. 100 cm using welding set, DG set.

Providing and fitting of MS suction bend out of 5.6 mm thick, 250 mm dia approx. 2.5 feet long as per site.

Providing and fitting of 12mm thick 250 mm dia MS flanges by welding works.

Repairs to 250 mm foot valve position by way of reconditioning of hinges, hinge bolts, weight plate, valve seat, valve body by way of welding, patching, grinding etc. Providing and fitting of rubber insertion cloth replacing the rusted/damaged parts, nuts, bolts, hinges etc as per requirement, cutting the old damaged/rusted MS bars of strainer and providing and fitting of new MS bars.

Re-fitting of suction line and foot valve and testing on full load.

Providing and fitting of rubber washers 250mm dia size.

Providing and fitting of nuts and bolts.

Providing and fitting of spare tyre for TC-16 tyre coupling with coupling bolts.

Complete dismantling of single stage horizontal pump by way of disconnecting all leads from the motor and marking the terminals, uncoupling of motor from the pump. Disassembling, dismantling and segregation of various pump parts such as shaft and sleeves, impeller, gland, fasteners, etc.

Complete assembling of single stage horizontal pump after cleaning of all parts throughly with petrol, coupling and alignment with motor, connecting of motor leads and testing on full load.

Mechanical transportation, loading, unloading and handling of pump, foot valve, suction pipe using appropriate means of transport through a lead of approximately 25 kilometer.

Providing and fitting of ball bearing no. 6408 reputed make along with proper and adequate lubrication.

Providing and fitting of 96× 96 flush type analog moving iron AC meter of reputed make.

Providing and fitting of palmative packing.

Meer Engineers (BID ID -2391132)