Renovation Up gradation of rooms verandah of Trainees Hostel no. 2 3 Sector 5 under the work of Various Civil Electrical Water Supply, Hor

B Total Amount i/c GST (DSR + Non-DSR):- 3,52,69,318

12 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering

and shuttering - All work up to plinth level :

4.1.3 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20

mm nominal size derived from natural sources)

13 4.1 Providing and laying in position cement concrete of specified grade excluding the cost of centering

and shuttering - All work up to plinth level :

4.1.8 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40

mm nominal size derived from natural sources)

14 5.22/5.22A Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and

binding all complete upto plinth level./ Steel reinforcement for R.C.C. work including straightening,

cutting, bending, placing in position and binding all complete above plinth level

5.22.6/5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more. Kg 500.00 94.45 47,225

15 13.4 12 mm cement plaster of mix :

16 11.39 Providing and laying rectified Glazed Ceramic floor tiles of size 300x300mm or more (thickness to be

specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours

White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement: 4 Coarse Sqm 300.00 1204.02 3,61,206

sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement

and matching pigments etc., complete.

17 8.31 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be

specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle

green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over

12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement

slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade

18 11.41 Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved

make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),

jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and

matching pigments etc., complete.

19 11.46 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with

water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours &

shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse

sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement

& matching pigments etc. complete

20 11.41A Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the

manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved

brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4

coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white

cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only

. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling

system and rubber mallet for placing the tiles gently and easily.

11.41A.3 Glazed Vitrified tiles Matt/Antiskid finish of size

21 16.90 Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm

having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all

colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid

on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns

including grouting the joints with white cement mixed with matching pigments etc. complete as per

direction of Engineer-in-Charge.

“Renovation & Up-gradation of rooms & verandah of Trainee’s Hostel no. 2&3, Sector-5” under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE

22 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and

manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Sqm 18000.00 130.48 23,48,640

23 13.81 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content

less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats

wherever required, to achieve even shade and colour.

24 13.43 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall

13.43.1 Water thinnable cement primer Sqm 11000.00 67.90 7,46,900

25 13.82 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than

50 grams/ litre, of approved brand and

manufacture, including applying additional coats wherever required, to achieve even shade and colour.

26 13.61 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :

13.61.1 Two or more coats on new work Sqm 200.00 138.49 27,698

27 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid

door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC

polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/

rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated

with miter joints after applying PVC solvent cement and screwed with full body threaded star headed

SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N

(Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modulus of elasticity 900

N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer

proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash

fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold

fast/lugs or SS dash fasteners shall be paid for separately).

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width

of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no

extra payment on this account shall be made.

28 26.87 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush

door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade),

calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives

(maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw

withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2,

modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property

of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel

butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws,

all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws

shall be paid separately)

29 9.119 Providing and fixing factory made P.V.C. door frame of size 50x47 mm with awall thickness of 5 mm,

made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm

long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with

19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through RM 423.60 430.12 1,82,199

out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete

as per manufacturer’s specification and direction of Engineer in-Charge.

30 9.120 Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes

of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails.

M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame

covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of

which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles

and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered

in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which

75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock

rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet

be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be

fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm

wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An An

additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel

using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer's

specification & drawing.

9.120.1 30 mm thick plain PVC door shutters Sqm 146.79 2586.62 3,79,690

31 9.97 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade

AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc.

32 9.100 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC

10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc.

33 9.57 Providing and fixing ISI marked IS : 1341 oxidised M.S. pressed butt hinges with necessary screws etc.

complete. (copper oxidized as per IS: 1378)

“Renovation & Up-gradation of rooms & verandah of Trainee’s Hostel no. 2&3, Sector-5” under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs in Steel Township at Rourkela (Odisha).

No DSR/MR ITEM DESCRIPTION Unit Qty RATE

34 9.96 Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than

grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws

etc. complete :

35 9.101 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not

less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with

necessary screws etc. complete.

9.101.2 Twin rubber stopper Each 200.00 65.58 13,116

37 21.1 Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded

built up standard tubular sections/ appropriate Z sections and other sections of approved make

conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including

necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/

neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed

mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling,

C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of

Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) :

21.1.1 For fixed portion

21.1.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 2000.00 491.28 9,82,560

38 21.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making

provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket

required (Fittings shall be paid for separately)

21.1.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron) kg 2000.00 595.06 11,90,120

39 21.3 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with

EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of

engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item):

21.3.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) Sqm 1500.00 1396.56 20,94,840

40 22.5 Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying

cement slurry mixed with water proofing cement compound consisting of applying : (a) First layer of

slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm.

This layer will be allowed to air cure for 4 hours. (b) Second layer of slurry of cement @ 0.242 kg/sqm

mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure

for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface,

treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed

44 10.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work,

including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all kg 2000.00 117.95 2,35,900

45 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50

15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 4504.26 63.74 2,87,102

46 10.15 Providing and fixing M.S. Tubular frames for doors, windows, ventilators and cupboard with

rectangular/ L-Type sections, made of 1.60 mm thick M.S. Sheet, joints mitred, welded and grinded

finish, with profiles of required size, including fixing of necessary butt hinges and screws and applying

a priming coat of approved steel primer.

Fixing with carbon steel galvanised dash fastener of required dia and size (to be paid for separately)

47 13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand

papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Sqm 18000.00 21.97 3,95,460

48 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot &

cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at

1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the

cost of cutting chases and making good the same including testing of joints complete as per direction

of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.

18.8.1 15 mm nominal dia Pipes Metre 1125.00 464.78 5,22,878

18.8.2 20 mm nominal dia Pipes Metre 750.00 541.27 4,05,953

49 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

18.49.1 15 mm nominal bore Metre 100.00 457.46 45,746

50 18.22 Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet :

51 18.53 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality

conforming to IS:8931

52 17.22A Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the

direction of Engineer-in-charge.

53 17.22B Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by

Engineer in charge. Each 100.00 6446.96 6,44,696

(a) 15 mm nominal dia

54 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

17.28.2 Flexible pipe

55 14.4 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and

making good the damages to walls, flooring and jambs complete, to match existing surface i/c

disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of

Engineer-in-Charge.

14.4.1 For door/ window/ clerestory window sqm 10.00 1103.04 11,030

56 14.82 Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as

per directions of Engineer-in Charge.

“Renovation & Up-gradation of rooms & verandah of Trainee’s Hostel no. 2&3, Sector-5” under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE

57 17.2 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with

seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually

controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete,

including cutting and making good the walls and floors wherever required :

17.2.1 W.C. pan with ISI marked white solid plastic seat and lid each 100.00 5837.37 5,83,737

58 17.7 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass

waste of standard pattern, including painting of fittings and brackets, cutting and making good the

walls wherever require:

White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap

59 17.73 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass

screws with concealed fittings arrangement of approved quality and colour.

17.73.2 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm,

weighing not less than 190 gms.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of

430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with

standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including

painting of fittings and brackets, cutting and making good the walls and floors wherever required :

17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern each 16.00 5551.11 88,818

61 MR Providing and fixing 100 MM DIA SWR uPVC pipes (Type-B) : RM 500.00 546.80 2,73,400

62 MR Providing and fixing SWR uPVC P trap (Type-B) : each 100.00 359.27 35,927

63 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592

Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal

12.41 expansion, (i) Single socketed pipes.

Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised

64 12.42 Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring

conforming to IS : 5382, leaving 10 mm gap for thermal expansion.

12.42.1 Coupler

12.42.6 Shoe (Plain)

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and

weighing not less than 440 grams.

66 MR Removing/termination of unwanted weeds/tress/vegitation by using WEEDICIDE as per manufacture

specification/ as directed by EIC. sqm 877.640 31.61 27,742

16.70 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including

strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction

of Engineer-in-charge.

16.70.1 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including

strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction Sqm 200.00 905.54 1,81,108

of Engineer-in-charge.

68 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701

marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet per liter 17500.00 10.22 1,78,850

and overflow pipes but without fittings and the base support for tank

Total Amount (Civil) (A):- 2,47,17,067 3,37,069

Total Amount (Civil) (A):- 2,47,17,067 3,37,069

“Renovation & Up-gradation of rooms & verandah of Trainee’s Hostel no. 2&3, Sector-5” under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE

(B) ELECTRICAL WORKS

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated

copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular

plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor

single core cable etc. as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box

2 1.24 including connections but excluding modular plate etc. as required.

1.24.4 3 pin 5/6 A socket outlet Each 300 128.54 38,562

1.24.5 6 pin 15/16 A socket outlet Each 210 207.55 43,586

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated

copper conductor, single core cable in surface/ recessed steel conduit as required.

1.7.4 2 X 6 sq. mm + 1 X 6 sq. mm earth wire Mtr 230 620.55 1,42,727

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker

4 2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required

2.10.2 Single pole and neutral Each 260 631.09 1,64,083

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for

modular switches in recess etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding

modular plate as required.

Supply/fixing of following sizes of heavy duty exhaust fan for single phase 230 volt, 50HZ AC supply

complete with motor, blades, frame, bracket, louver/ shutter etc as required. (HavellS Make, Cat No -

Ventil Air-DX or equivalent with approval of Deptt).250 mm Exhaust Fan (1500 RPM).

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate

switch box including connections but excluding modular plate etc. as required.

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing

9 5.4 masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre each 10 7872.29 78,723

long etc. with charcoal/ coke and salt as required.

Supply&fixing of ceiling fan 48"sweep including all necessaryconnections for proper functioning of

10 MR fans.(make:usha/orient/khaitan) EACH 60 3407.25 2,04,435

SUPPLY & FIXING OF 18WATT, 200-240VOLTS, B-22 CAP TYPE:BC/ES (PIN/SCREW TYPE), COLOUR:

11 MR COOL DAY LIGHT CFL LIGHT (MAKE: PHILIPS/BAJAJ/HAVELS/CG/GE) ON EXISTING HOLDER AS Each 150 413.91 62,087

DIRECTED BY ENGINEER IN-CHARGE AND AS PER SITE REQUIREMENT.

Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode,

12 5.9 including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall Mtr 150 151.71 22,757

be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240

V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,

interconnections, powder painted including earthing etc. as required. (But without

MCB/RCCB/Isolator)

2.3.1 6 way , Double door Each 5 2324.18 11,621

2.3.2 8 way , Double door Each 60 2710.84 1,62,650

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB

14 2.4 distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar,

earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without

2.4.1 MCB/RCCB/Isolator

4 way (4 + 12), Double door EACH 1 4310.16 4,310

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete

with connections, testing and commissioning etc. as required

Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current

17 2.14 circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supply & Fixing of bakelite angle holder/pendent holder/batten holder on the existing wooden

18 MR board/round block/bakelite sheet with all connection complete as required. (ANCHOR make holders Each 150 44.25 6,638

are to be used)

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable

size of phenolic laminated sheet cover in front including painting etc. as required.

“Renovation & Up-gradation of rooms & verandah of Trainee’s Hostel no. 2&3, Sector-5” under the work of Various Civil, Electrical, Water Supply,

Horticulture, Hospitality jobs in Steel Township at Rourkela (Odisha).

SL No DSR/MR ITEM DESCRIPTION Unit Qty RATE

Supplying and fixing MOTOR STARTER-25A on the existing modular plate switch box including

21 MR connections but excluding modular plate etc. as each 55 821.17 45,164

required(make:C&S,ANCHOR,L&T,SIEMENS,HAVELS,ABB,SCHNEIDER)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker

22 2.10 suitable for inductive load of following poles in the existing MCB DB complete with connections,

testing and commissioning etc. as required.

2.10.3 Double pole Each 70 691.14 48,380

2.10.5 triple pole and neutral Each 5 1293.79 6,469

Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

Supply & fixing of Surface Mounting cool white/warm white LED fitting

(Philips/Bajaj/GE/CG/C&S/MESCAB/Lighting Technology) of 18w with suppy voltage 100V - 265

V,50HZ, Pre-treated CRCA frame in Powder coated white finish,LED Efficacy: >90 lm/W

,Weather protection: IP 20

25 SUPPLY AND LAYING OF CABLE 3.5 X 95MM2 AL. THE CABLE 1100V GRADE SHALL CONFIRM TO

IS:1554(PART-1) WITH STANDARD ALUMINUM CONDUCTOR CONFIRMING TO CLASS-2 OF

MR-46 IS:8130/84. THE CABLE SHALL BE WITH ARMOUR OF GALVANISED ROUND WIRE/FLAT STEEL STRIP. MTR 810 2014.32 16,31,599

CABLE SHALL CONFIRM TO THE IS INDICATED WITH ITS LATEST AMENDMENT. CABLE SHALL BE WITH

ISI CERTIFICATION MARK. CABLE SHALL BE LAID IN EXISTING TRENCH.

26 SUPPLY AND LAYING OF CABLE 4 X 25MM2 AL. THE CABLE 1100V GRADE SHALL CONFIRM TO

IS:1554(PART-1) WITH STANDARD ALUMINUM CONDUCTOR CONFIRMING TO CLASS-2 OF

MR-45 IS:8130/84. THE CABLE SHALL BE WITH ARMOUR OF GALVANISED ROUND WIRE/FLAT STEEL STRIP. M 510 895.22 4,56,562

CABLE SHALL CONFIRM TO THE IS INDICATED WITH ITS LATEST AMENDMENT. CABLE SHALL BE

WITH ISI CERTIFICATION MARK. CABLE SHALL BE LAID IN EXISTING TRENCH

Supply & fixing of 200 Amps.HPL/HAVELS/INDO ASIAN make ICTPN switch fuse unit with 200

Amp.HRC fuse on MS frame grouted on the wall surface or on the existing panel board including all

incoming & outgoing cable connections with necessary socketing arrangement and cable entry

box where ver necessary complete as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including

connections etc. as required.

Supply & fixing of 63 Amp.,3 phase 6way per phase Distribution box fitted with copper bus of 25x3

mm per phase.each bus having provision of incomer at the centre with 10 mm brass nut bolts and 8

29 MR SWG copper rod rivetted & brazed with the copper bus.There will be one no.20 way neutral bus fitted Each 8 12655.50 1,01,244

over porcelain base suitable for connection with 8 mm brass nuts/bolts with socketing for outgoing.

1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in

30 surface/recess including cutting the wall and making good the same in case of recessed conduit as

TOTAL AMOUNT (Electrical) (B):- 73,00,070 29,15,112

TOTAL AMOUNT (Electrical) (B):- 73,00,070 29,15,112