Termination of the LILO of 220 kV Sherpur Jhajra at 120 MW Vyasi HEP UJVNL for direct at 400 kV substation Sherpur PGCIL with a line length of apx 2.5 km partially O H approx. 1.5 Km with multi-circuit towers and partially with UG apx length 1 Km

Amount

Price Schedule-A

Supply for Termination of 220 kV Jhajra- Sherpur Line from AP 16 to cable termination point near at 400 kV Substation Sherpur (PGCIL) Dehradun" with Multicircuit tower

Design

Designing of 220 kV Multi circuit tower (i.e. 4 circuits) suitable for (30 deg-60deg)/dead end type tower along with Body extensions (i.e. +3M, +6M, +9M & 12M), normal stub & raised chimney stubs with Cleat, Bolts, Nuts & Washers, etc. as finalized by PTCUL.

Designing of 220 kV Multi circuit tower (i.e. 4 circuits) suitable for (15 deg-30deg) along with Body extensions (i.e. +3M, +6M, +9M & 12M), normal stub & raised chimney stubs with Cleat, Bolts, Nuts & Washers, etc. as finalized by PTCUL.

Designing of 220 kV Cable ternination Multi Circuit type tower (i.e. 4 circuits) along with Body extensions (i.e. +3M, +6M, +9M & 12M), normal stub & raised chimney stubs with Cleat, Bolts, Nuts & Washers, etc. as finalized by PTCUL.

Designing of Normal and Raised chimney RCC type foundations (Dry, FS and PS soil) useable for 220 kV Multi Circuit type tower (i.e. 4 circuits) suitable for (30 deg-60deg)/dead end type tower along with their extensions.

Designing of Normal and Raised chimney RCC type foundations (Dry, FS and PS soil) useable for 220 kV Cable ternination Multi Circuit type tower (i.e. 4 circuits) along with their extensions.

Designing of Normal and Raised chimney RCC type foundations (Dry, FS and PS soil) useable for 220 kV Multi Circuit type tower (i.e. 4 circuits) suitable for (30 deg-60deg)/dead end type tower along with their extensions.

Fabrication, Galvanizing & Supply of Normal Stub/Raised Chimney Stub for various type of towers with cleat including Nuts & Bolt.

220 kV Multi Circuit type tower alongwith body extension.

220 kV Cable ternination Multi Circuit type tower alongwith body extension.

Fabrication, Galvanizing and supply of various type of complete lattice towers with bolts & nuts, step bolts, pack washers, spring washers, D-shackles including Body/Leg extensions.

220 kV Multi Circuit type tower alongwith body extension.

220 kV Cable ternination Multi Circuit type tower alongwith body extension.

Supply of Galvanized templates

Galvanized Template (01 Nos.) of 220 kV Multi Circuit type tower including Bolts, Nuts & washers etc.

Galvanized Template (01 Nos.) for 220 kV Cable ternination Multi Circuit type tower including Bolts, Nuts & washers etc.

ACSR Zebra Conductor

Design and supply of hardware Fittings

Tension fitting for Twin ACSR Zebra Conductor suitbale for 2x160 KN Insulator

Tension fitting for GS Earth wire 7/10 SWG

Pilot fitting suitable for Twin ACSR Zebra (90 kN insulators)

220 kV, 160 KN porcelain Long rod Insualtor string (String consisting 02 No. 160 KN Porcelain long rod insulator)

220 KV, 90 KN porcelain Long rod Insualtor string (String consisting 01 No. 90 KN Porcelain long rod insulator)

Accessories for conductor

Bundle Spacer Damper For ACSR Twin Zebra Conductor

Rigid Spacer For ACSR Twin Zebra Conductor

Mid span compression joint for ACSR Twin Zebra Conductor

Flexible Copper Bond

Repair sleeve for Zebra Conductor

Supply of following tower accessories

Number plate

Danger Plate

circuit Plate (set of two)

Phase Plate(set of three)

Anti-Climbing device

Grounding work for Pipe type earthing including excavation and backfilling (Set of Two).

Supply of following items for aviation requirements

Span markers

Obstruction lights (to be provided as per IS 5613)

1 Medium + 2 low intensity

1 Medium + 4 low intensity

Supply of Wind Measuring Equipment

Supply of OPGW

OPGW 48 Fibre - 220 kV

All requiered hardware such as Tension assemblies, earthing bond and downlead clamps as needed for a tension tower suitable for 48 Fibre OPGW on 220 kV lines

Vibration Damper

Reinforcing rod

Splice enclosure along with the downlead clamps as needed for 48 Fiber OPGW

Approach Cable 48 Fibre

Junction Box (OPGW-Approach cable) along with downlead clamp for 48 Fibre

FODP 48F : Indoor Type, rack mounted with FCPC coupling and pig tails (5 mtrs each).

Supply for Termination of 220 kV Jhajra- Sherpur Line from cable termination point to 400 kV Substation Sherpur PGCIL Dehradun through Under ground Cable

Design, manufacturing & supply of 220 kV 1600 sq. mm. Single Core XLPE insulated Copper Cable ( 6+1 Spare ).

Supply of 6.6 kV 300 Sqmm. Sheath bonding Cable

Supply of Polymer type outdoor termination kit suitable for 220 kV 1600 Sq.mm Copper Cable.

Supply of straight through joint suitable for 220 kV 1600 Sq.mm Cable

Three Phase earthing link box without SVL.

Single Phase earthing link box with SVL.

Single Phase earthing link box without SVL.

Supply of polymer type Lighting Arrester suitable for 220 kV 1600 Sq.mm. cable with surge counter meter.

Supply of route marker (@ 50 Meter interval

Supply of HDPE Pipes (250 mm dia)

Pipe Earthing for termination kit & Lighting Arrester

Warning tape in buried trench

Supply of earth continuity Conductor of 1.1 kV 1Cx300 Sq. mm.(for earthing)

Supply of Ms flat 75x12 mm Earthing material

Supply of Ms round 40 mm for earthing (having 3 mtr. length)

Description of Work / Item(s)

Amount

Price Schedule-B

Erection for "Termination of 220 kV Jhajra- Sherpur Line from AP 16 to cable termination point near at 400 kV Substation Sherpur (PGCIL) Dehradun" with Multicircuit tower

Survey

Detailed route Survey, Profiling, Alignment etc. including prepration of Tower schedule, Optimisation of tower locations etc and prepration of forest case complete in all respect

Check survey and final peg marking

Soil Investigation

Setting of Normal/Raised chimney Stubs, inlcuding all foundation work but excluding the cost of concreting and excavation.

220 kV Multi circuit tower

220 kV Cable termination Multi circuit tower

Concrete for foundations including all material, shoring and shuttering, forming, concreting and curing of water inlcuding cost of cement for M-20 (i.e. 1:1.5:3 mix) & M-10 (i.e. 1:3:6 mix) concrete (cost of supply of MS steel bar is not to be included).

M20 (i.e. 1:1.5:3 mix)

M10 (i.e. 1:3:6 mix)

Excavation of foundation pits including all earthwork, backfilling and levelling etc.

Super structure erection of various type of towers, tower parts, tower body extension (complete) and leg extension with bolts & nuts including all work above ground level excluding hoisting of insulators & fitting of danger plate, number plate, phase plate, circuit plate, anticlimbing device but punching of bolts.

220 kV Multi Circuit type tower including Erection for 3 mtr. 6mtr., 9 mtr. 12 mtr. Body Extension

220 kV cable termination multi circuit tower including Erection for 3 mtr. 6mtr., 9 mtr. 12 mtr. Body Extension

Laying, Stringing Tensioning, clamping, jointing etc. complete with Twin ACSR zebra conductor including hoisting of insulators and fitting of vibration dampers, Armourd rods, jumpers at tower etc. for complete route for D/C twin zebra.

Release/destringing of existing Twin ACSR Zebra conductor of 220 KV double circuit ine including all associated work for destringing.

Grounding work for Pipe type earthing including excavation and backfilling (Set of Two).

Protection of tower footing

Revetment with rough stones and random rubbles with 1:5 cement mortor inlcuding cost of all material, labour and T&P, excavation backfilling, levelling etc. as per approved drawings.

Cement concretting requried for bottom pad for revetment work in 1:4:8 ratio.

Cement concretting requried for top of revetment walls in 1:3:6 ratio.

Tack welding on bolts and nuts on Ist section of towers with supply & application of zinc rich primer and two coats of enamel paints

Fixing of the following tower accessories

Danger plate

Number plate

Phase Plate (set of three)

Circuit Plate (set of two)

Anti-Climbing device

MS Steel bars for reinforcements

Installation of Avaition Items

Span markers

Obstruction lights (to be provided as per IS 5613)

1 Medium + 2 low intensity

1 Medium + 4 low intensity

Painting of Towers (as per aviation guidelines)

Installation of Wind Measuring Equipment

Erection of OPGW

Laying, Stringing Tensioning, clamping, jointing etc. complete with OPGW 48 Fibre - 220 kV and all requiered hardware such as Vibration damper, tension assemblies, earthing bond and downlead clamps as needed for a tension tower suitable for 48 Fibre OPGW on 220 kV lines

Reinforcing rod

Splice enclosure along with the downlead clamps as needed for 48 Fiber OPGW

Approach Cable 48 Fibre

Junction Box (OPGW-Approach cable) along with downlead clamp for 48 Fibre

FODP 48F : Indoor Type, rack mounted with FCPC coupling and pig tails (5 mtrs each).

Erection for Termination of 220 kV Jhajra- Sherpur Line from cable termination point to 400 kV Substation Sherpur PGCIL Dehradun through Under ground Cable

Detailed Survey, Laying of 220 kV 1600 Sq. mm. cable ( 6+1 spare) including excavation of ground for min. 1.9 meter depth/as per the site requirement for trefoil arrangement and constraints in normal or hard soil Sand/brick installed, roads or any other site condition/underground conditions refiling, raining of earth etc. with suitable size RCC/HDPE pipes as cover on strategic locations for complete machanical protections of the Cable showing all danger sign etc. in the ground and above on the route including structure installation, earthing, bounding shielding size testing and commissioning in all respects.

Complete Route Survey, Check Survey including trial pits, Profiling, Alignment etc. including prepration of Tower schedule, pegmarking of locations etc.

Earth work excavation by mechanical means (hydraulic excavator) or manually means

Laying of 1600 Sq.mm. 220 kV Cable including all the works related to laying of XLPE cable, sheath bonding cable and earth countinuty cable like excavation, sand filling, RCC slab, warning tape, backfilling, removing of extra excavated earth etc. complete in all respect including testing & commissioning of cable system.

Laying of 1600 Sq.mm. 220 kV Cable by HDD mathod including all the works related to laying of cable like excavation, sand filling, RCC slab, warning tape, backfilling, removing of extra excavated earth etc. complete in all respect including testing & commissioning of cable system.

Providing and laying of position cement concrete or specified grade including the cost of centering, shuttering, material, forming, concreting, curing of water and cost of CC for 1:3:6 (excluding the cost of Reinforcement of slab).

Providing and laying of position cement concrete or specified grade including the cost of centering, shuttering, finishing, forming, concreting, curing of water and cost of cement 1:1.5:3 (excluding the cost of Reinforcement of slab).

Reinforcement for RCC work including cost of all size of bars, straightening, cutting, bending, placing in position and binding all complete upto plinth level cods twisted bars.

Brick work with commen brunt clay F.P.S. brick of class designation 7.5 in foundation & plinth as per requirement cement mortar 1:4 ( 1 cement : 4 Coarse sand ), work also include plaster of walls of ratio 1:6 & curing of water.

Installation of straight through joint suitable for 220 KV 1600 Sq.mm Cable

Installation polymer type outdoor termination kit suitable for 220 kV 1600 Sq.mm Copper Cable (for monopole) including earthing etc.

Pipe earthing and connecting with 75x12 mm earth strip

Installation of Polymer/Porcelain Type Lightening Arrestor, Surge counter.

Erection of route marker @ 50 Meter interval

Installation of single phase link boxes

Installation of three phase link boxes

Laying of MS Flat 75x12 mm including cutting, bending and all welding work

Laying of MS round 40 mm including reiser cutting, bending and all welding work

Price Schedule-C (Type Test Charges)

Type Test Charges for "Termination of 220 kV Jhajra- Sherpur Line from AP 16 to cable termination point near at 400 kV Substation Sherpur (PGCIL) Dehradun" with Multicircuit tower

Fabrication and type testing of towers using ungalvanised (black) steel

220 kV Multi circuit tower (i.e. 4 circuits) suitable for (30 deg-60deg)/dead end type tower with +9M Body extension & max. Leg extension.

220 kV Multi circuit tower (i.e. 4 circuits) suitable for (15 deg-30deg) with +9M Body extension & max. Leg extension.

220 kV Cable termination Multi circuit (i.e. 4 circuits) suitable for Dead end type tower with +9M Body extension & max. Leg extension.

Note: Valid Type Test certificates of all other materials are to be submitted at no extra cost.

Description of Work / Item(s)

Amount

Total Price Schedule-A (Supply) from BoQ1 sheet WITHOUT GST

Total Price Schedule-B (Erection) and Total Price Schedule-C (Type Test Charges) from BoQ2 sheet WITHOUT GST

Add GST* Amount on (Total of Price Schedule-A + Total of Price Schedule-B + Total of Price Schedule-C above)

UNIVERSAL CABLES LIMITED (BID ID -384545)

UNIVERSAL CABLES LIMITED (BID ID -384545)

UNIVERSAL CABLES LIMITED (BID ID -384545)