SPECIAL REPAIR FOR SNCO L/IN ACCN, PROVN OF AREA DRAINAGE WORKS WITH COVER SLAB AND PROVISION OF FIRE SHEDS AND METALLIC BOARD AT VARIOUS LOCATIONS AT GANDHINAGAR UNDER GE (AF) CHILODA

Amount

Dismantling floor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 to receive tiles etc on vertical surfaces of walls complete all as specified and directed.

M&L for dark shade Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match premium quality as in floor etc. complete all as specified and directed.

All as per item No 4 here in before but on vertical surfaces/skirting.

M&L for Glazed ceramic coloured tiles in vertical surfaces 300 x 450 x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 SQM but not exceeding 0.18 SQM, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Granite 20 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

S&F in repair urinal spreader of chromium plated of any colour for fixing with 15 mm dia pipe complete all as specified and directed. (Make - Cera Cat part No. F8070201 or Equivalent as approved by GE.)

S&F in repair CP bib cock with wall flange fixed to15mm bore pipe complete with all fittings complete all as specified and directed. (Make- Jaquar Cat part No. FON-40037 or Equivalent as approved by GE.)

S&F in repair Angular stop cock with wall flange fixed to15mm bore pipe complete all as specified and directed. (Make- Jaquar Cat part No. KUP-35053PM or Equivalent as approved by GE.)

S&F in repair Pillar tap single lever tall boy without popup waste system fixed to15mm bore pipe complete all as specified and directed. (Make : Jaquar Cat part No OPP-35001PM or Equivalent as approved by GE.)

S&F in repair Round shape thin rim Table top basin with fixing accessories of size 360mm x 360mm x 120mm complete all as specified and directed. (Make :- Jaquar Cat part No SLS-WHT-6905 or Equivalent as approved by GE.)

S&F in repair Bottle trap 32mm size with 250mm &190mm long wall connection pipes & wall flange complete all as specified and directed. (Make :- Jaquar Cat part No. ALD-769L250X190 or Equivalent as approved by GE.)

S&F in repair EWC with wall hung cistern, Drainage L Bend Pipe, Gasket and Installation Kit with PP normal close seat cover, Hinges, Fixing Accessories, Accessories Set and Cistern fitting, of size 350x480x395 mm with S trap complete all as specified and directed. (Make :- Jaquar Cat part No. CNS-WHT-551SNSPP184LZ or Equivalent as approved by GE.)

S&F in repair 15 mm CP Bib cock 2 way with wall flange fixed to15mm bore pipe complete with all fittings complete all as specified and directed. (Make- Jaquar Cat part No. KUP-35041PM or Equivalent as approved by GE.)

S&F in repair CP Health Faucet with 8mm dia, 1.20 mtr long flexible tube & wall hook complete all as specified and directed. (Make- Jaquar Cat part No. ALD-573 or Equivalent as approved by GE.)

S&F in repair Liquid Soap dispenser with metallic bottle complete all as specified and directed. (Make- Jaquar Cat part No. ACN-1135N or Equivalent as approved by GE.)

S&F in repair toilet roll holder with stainless steel flap complete all as specified and directed. (Make- Jaquar Cat part No. ACN-1153S or Equivalent as approved by GE.)

S&F in repair stainess steel towel rack 600mm lomg with lower hangers complete all as specified and directed. (Make- Jaquar Cat part No. ACN-1181S or Equivalent as approved by GE.)

S&F in repair CP Overhead shower 150x150mm squarel shape single flow (ABS Body chrome plated with grey face plate ) with rubit cleaning system complete all as specified and directed. (Make- Jaquar Cat part No. OHS-35495 or Equivalent as approved by GE.)

S&F in repair CP wall mixer with provision for overhead shower with with 115mm bend pipe on upper side, connecting legs & wall flanges complete with all fittings complete all as specified and directed. (Make- Jaquar Cat part No. FUS-29273UPR or Equivalent as approved by GE.)

S & F in repairs Vitreous China urinals, half stall urinal, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe complete all as specified and directed. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe).

S&F in repairs 32 mm size PVC waste pipe for wash hand basin / urinal / sink of 900mm long complete all as specified and directed.

S&F in repairs vitreous China squatting pan, orissa pattern of size 580x440mm, white with integral foot rest incl connection to trap & flushing pipe complete all as specified and directed.

S&F in repairs 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets flush pipe of polyethylene of low or high density or PVC 32mm dia, for low level cistern with PVC connection 15 mm size with PTMT nuts of length 600mm complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar complete all as specified and directed.

M&L Brick work with fly ash brick, old size bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work with fly ash bricks, old size bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed.

M&L ATT Along the external/enternal wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Taking down cement or cement lime plaster any description incl racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. Note :- Repairs in patch work.

M&L for rendering 10mm thick plaster in CM 1:6 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and directed.

M&L for 5 mm thick cement plaster in CM 1:3 on ceiling finished even and smooth without using extra cement complete all as specified and directed.

M&L for cement plaster 15 mm thick plaster with water proofing compound in two layer (first layer 10mm thick & Second layer 5mm thick) in CM 1:4 on fair faces of brick work or concrete surfaces of walls finished even & smooth with out using extra cement complete all as specified and directed. Note : WPC shall be measured and paid seperately.

Supply only Integral waterproofing compound

M&L preparing new surface of ceiling and applying three coats of white wash complete all as specified and directed.

M&L preparing new surface of wall and applying two coat of oil emulsion distemper over a coat of primer and 3 mm thick wall care putty complete all as specified and directed.

M&L preparing new surface of wall and applying three coat of white wash complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall over applying two or more coats of 100% Premium acrylic emulsion paint (weather) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

M&L for preparing of old surfaces of ceiling and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for preparing of old surfaces of walls and applying one coat of distemper oil emulsion complete all as specified and directed.

M&L for preparing of old surfaces of wall and applying one coat of acrylic emulsion weather coat paint complete all as specified and directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

S&F pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550Mpa as in roof covering fixed with self tapping screw complete all as specified and directed.

S&F MS Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Dismantling water tanks exc 500 but n.exc 1000 Litres capacity.1000 Litres capacity complete all as specified and directed.

S&F rotational moulded water storage tank 1000 Ltr capacity double layer (cylindrical/vertical with closed top) hoisted and fixed in position complete all as specified as directed.

S&F in repairs 20 mm ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Taking up or down steel tubing pipe and connections 15 mm bore complete all as specified and directed.

Taking up or down steel tubing pipe and connections 20 mm bore complete all as specified and directed.

Taking up or down steel tubing pipe and connections 25 mm bore complete all as specified and directed.

S&F 15mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 20mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 25mm dia tubes ‘Medium grade’ galvanized with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves 25 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repair 40 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in floors/ trenches complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints laid in floors/ trenches complete all as specified and directed.

S&F in repair 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F in repair 75 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 110 PVC (SWR) junction single, (Single T) equal or unequal complete all as specified and directed.

S&F in repair 75 PVC (SWR) vent cowl complete all as specified and directed.

S&F in repair PVC (SWR) floor trap, plain with grating including jointing with solvent cement 75 mm bore dia of outlet of pipe complete all as specified and directed.

S&F in repair stainless steel grating doom 150x150mm complete all as specified and directed.

S&F in repairs PVC (SWR) gully trap 125/110mm setting and jointing with solvent cement and making good of disturbing gound with PCC 1:2:4 complete all as specified and directed.

S&F of 110 mm (4") Rain Water Drain Down take Pipes fixing done with Pipe Supporting Clamping System with Rain Water Bracket Set with Pipe Support Channel + U Bolt Rubber Sleeve mounted system running vertically with wall distance 75 mm (3"): Pipe Supporting Clamping made of: Rain water Bracket for 110 mm (4") PVC Pipe with pipe suppon channel having Wall Distance 75 mm (3") made of Low Carbon Hot roll Gauge Corrected Oil Pickled & Orawn (HROP D) Steel (IS 1079); with ribs and notch are Hot Dip Galvanzied + Zn AI Flake coated having Salt Spray Test (Test method - ASTM B-117-20t9) result 2000 hrs. 2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn AI rlake coated with noise absorbing transparent ribbed silicon rubber sleeve mounted; with Hex Flange Nut BSW 5/16 x 18 8 x T3 with Serration set as per DIN 6923 - Zn AI Flake coated. Hotdip Galvanising: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to IN 10204 Material Quantity for one unit : 1. Rain Water Bracket Set with pipe support channel for 110 mm (4“) PVC Pipe; Wall distance 75 mm (3") - 1 Nos. ; 2. U Bolt Rubber Sleeve mounted for 110 mm (4") PVC Pipe Dia. - 1 No.; and 3. Fixing Nail of thickness 6.5 mm and length 63 mm (2 1/2") - 2 nos.

S&F of 75 mm (3") Rain Water Drain Down take Pipes fixing done with Pipe Supporting Clamping System with Rain Water Bracket Set with Pipe Support Channel + U Bolt Rubber Sleeve mounted system running vertically with wall distance 75 mm (3"): Pipe Supporting Clamping made of: Rain water Bracket for 75 mm (3") PVC Pipe with pipe suppon channel having Wall Distance 75 mm (3") made of Low Carbon Hot roll Gauge Corrected Oil Pickled & Orawn (HROP D) Steel (IS 1079); with ribs and notch are Hot Dip Galvanzied + Zn AI Flake coated having Salt Spray Test (Test method - ASTM B-117-20t9) result 2000 hrs. 2. U bolt Rubber Sleeve mounted are made of low carbon mild steel with Rod diameter 7 mm approx.; Zn AI rlake coated with noise absorbing transparent ribbed silicon rubber sleeve mounted; with Hex Flange Nut BSW 5/16 x 18 8 x T3 with Serration set as per DIN 6923 - Zn AI Flake coated. Hotdip Galvanising: As per IS 2629 (1985) - 610 grams/m2 (> 85 microns). Material Grade : IS 1079 DD used as per MTC confirms to IN 10204 Material Quantity for one unit : 1. Rain Water Bracket Set with pipe support channel for 75 mm (3“) PVC Pipe; Wall distance 75 mm (3") - 1 Nos. ; 2. U Bolt Rubber Sleeve mounted for 110 mm (4") PVC Pipe Dia. - 1 No.; and 3. Fixing Nail of thickness 6.5 mm and length 63 mm (2 1/2") - 2 nos.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size n exc 1.5 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exc 1.5 sqm but n exc 4.00 sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

S&F powder coated aluminium frame for partitions, doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge

S&F 5.5 mm thick ordinary quality glass fixed to aluminum frame work with rubber beading gasket exc 0.5 sq. m in each pane complete all as specified and directed.

S&F Pressed steel frames size 125X60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed.

S&F Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides with decorative face veneer with lipping/frame to match complete all as specified and directed.

M&L PCC 1:3:6 Type C-0 Filling In P.S. Door Frame complete all as specified and directed.

S&F Solid PVC frame (Single Rebated) of size 60mmx30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer intergral skin wih suitable metal stiffner and fixed with 100x8 sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and directed. (Note:- Door frame shall be water proof, termite proof, elegant and should have excellent srews holding strength to fix hinges and hold doors properly foa a long life)

S&F Factory made solid PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with C type GI or 40x20x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing complete all as specified and directed.

S&F door closer aluminium (extruded section body ) hydraulically regulated designation No 3 universal type suitable for door shutter of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed.

S&F in repair stainless steel spring door closer for door shutter including roller and roller plate complete all as specified and directed.

M&L for glazed and skeleton shutters 30 mm thick 1st class hard wood open rebated and prepared to receive glass divided into squares rebated sash bars any numbers, edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, sizes of memebres as specified in SSR Part-I section 8 clause 8.24 (a) supply and fixed to chowkat, complete all as specified and directed.

S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with MS screw & bolts complete all as specified and directed.

M&L 30mm thick flush door shutter, solid core construction with block board core and ply wood face panels, commercial type on both faces complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section, length of bolt 200mm complete all as specified and directed.

S&F aluminum anodized barrel tower bolt of extruded section, length of bolt 150mm complete all as specified and directed.

S&F 150mm size aluminum handles, cast type anodised complete all as specified and directed.

S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 150mm length complete all as specified and directed.

S&F 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.

S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with MS screw & bolts complete all as specified and directed.

Hacking out old broken glass (any thickness ,size,quality or description) from wooden frames or stone, iron frame, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F for 4 mm thick sheet glass oridinary quality and glazing with oil putty in square not exc 0.5 sq.m in each pane complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates, SS chain etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed by Engr-in-charge.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons etc laid, bedded and pointed in any mortar complete all as specified and directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons etc laid dry or laid dry and pointed complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for 75mm thick Cement concrete Type D2 1:4:8 (40 mm graded graded aggregate) as in sub bases,floor finishes and pavings complete all as specified and directed.

M&L cement concrete type B1 1:3:6 (20mm graded aggregate) for plinth protection etc complete all as specified and directed.

M&L for 20 mm thick screed bed or bedding layer in CM 1:6 for laying floor finishes complete all as specified and directed.

M & L Chequred cement concrete tiles 30cm x30cmx 25mm thick with grey cement and pigment , set jointed in neat cement slurry complete all as specified and directed.

M&L Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade with grey cement and pigment jointed in neat cement slurry and pointed in cement mixed with pigment to match the shade of paver block complete all as specified and directed by Engineer-in-Charge.

All as per item No 109 here in before but except tiles.

M&L factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in getting out in soft/loose soil complete all as specified and directed.

Excavating over areas, exc 1.5 m but not exc 3 m deep and getting out in getting out in soft/loose soil complete all as specified and directed.

Excavating in trenchs not exceeding 1.5 metre wide and not exceeding 1.5 metre in depth and not exc 10 Sqm on plan in soft/loose soil and getting out complete all as specified and directed.

M&L for PCC 1:4:8, type D2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L for PCC 1:3:6, type C2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L Loose filling with aggregates with broken stone or boulders of gauge 80 to 150 mm in soakage pits, soakage wells and Recharge pits etc complete all as specified and directed.

M&L Loose filling with aggregates with broken stone or boulders of gauge 40 mm to 80 mm in soakage pits, soakage wells and Recharge pits etc complete all as specified and directed.

M&L Loose filling with aggregates with broken stone or boulders of gauge 6 mm to 20 mm in soakage pits, soakage wells and Recharge pits etc complete all as specified and directed.

M&L Cement concrete type B0 1:2:4 (12.5mm graded aggreded) in benching, coping and the like including weathering slightly rounded or chamfered angles as directed including form work and finishig all exposed surfaces complete all as specified and directed.

M&L Extra for forming fair finished drain or drain channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred stopped ends etc complete all as specified and directed.

M & L Rendering 15mm thick on fair faces brick surfaces in cement mortar 1 : 4 finished even and smooth without using extra cement complete all as specified and directed.

M&L for Pre cast RCC 1:2:4 type B1 using 20 mm graded stone aggregates as in cover slab for soakage well / manhole and similar works supported on walls and set in cement mortar 1:6 incl necessary form work and demolition complete all as specified and as directed by Engr in charge.

M&L for mild steel TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specfied and directed.

Boring holes 300mm diameter & 25 m depth in soil for recharge pits and getting out and Removing/disposal of soil to a distance of n exc. 50 m complete all as specified and directed by Engineer-in-charge.

S&F 150mm bore PVC (SWR) slotted pipes Grade B single/double socketed, in any length with rubber ring joints, laid in bore holes for recharge pits complete all as specified and directed by Engineer in charge.

Returning filling in including spreading,levelling,watering and well ramming in later not exceeding 25 cm in layers in soft and loose soil complete all as specified and directed.

Removal of excavated soil to a distance n exc. 50 m and deposited where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Supply and laying of factory made precast PU shape storm water drain 2000 mm long, having in to in dimension 450 x 450 mm from top T-6 load carrying capacity – 4.8 T Axle Load – 2.4 T Wheel Load confirming to JIS having high performance self-compacting concrete of M40 Cylinder Strength/ M50 Cube Strength & Fe 500 / Fe500D shall be use for reinforcement. The product shall have tie shape joint 10-20 mm width X 25 mm depth groove as per JIS on both sides of each storm water drain for jointing two precast storm water drain using cement mortar or suitable non shrink grout. The precast utility duct must consist of special in built inlets at appropriate location for fixing De-shackle for mechanical installation, including supply, transportation, installation on specific location at site in line, level, gradient and plumb with necessary testing commissioning etc complete as per instruction of Engineer in Charge.

Supply and laying of factory made Precast perforated Lid having length of 500 mm, width suitable for placing on U - Shape storm water drain (PUSD) sizes 450 x 450 mm, thickness of 70 mm respectively. Lid should have T-6 load carrying capacity – 4.8 T Axle Load – 2.4 T Wheel Load, confirming to JIS & meeting IS requirements having High Performance Self Compacting Concrete of M-40 cylinder strength/ M-50 cube strength. The Fe 500/ Fe500D shall be used for reinforcement. The each lid unit should have slits of 155 mm X 20 mm slit on two sides along the width of the lid for storm water intake. Lid should have anti-skid finish at top(except 300 mm lid) . Each lid may have in-built, specially designed lifting inserts of appropriate load carrying capacity and fixed at specific location to avoid the tilting of the lid for safe & fast installation complete all as specified and directed.

M&L for 1.6mm thick Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and directed.

S&F bands, straps, supports or stays, including bolts, hooks, and pintle hinges and similar articles for hanging fire hydrant cylinders, using steel section confirming to Fe-290, Gde E-165 complete all as specified and directed.

S&F Project boards made out of 3 mm thick aluminium composite panel, front face fully covered with and including retro reflective sheet type-IV, supplying and pasting machine cut high quality self adhesive reflective sheet border/ symbols/ legend/ arrows letter (hindi or english) of any colour, as approved, fixing of board on wall with self tapping screws complete all as specified and directed.

S&F Acrylic sheet of 300mmx250mm with background colour of white and writing instruction on each plate in hindi or english of total words not exceeding 400 Nos. In red as per sample approved by GE.

S&F Acrylic sheet of 100mmx300mm with background colour of white and writing instruction on each plate in hindi or english of total words not exceeding 10 Nos. In red as per sample approved by GE.

S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. (Fe 410-W(Gde-E- 250) quality-A) complete all as specified and directed.

M&L for preparing new surface of steel of any description over 10cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Shreeganesh Construction (BID ID -3157647)

JIYA CONSTRUCTION (BID ID -3155676)

ARTI CONSTRUCTION (BID ID -3156528)

NEW TECH PROJECT INDIA (BID ID -3156300)

Ramdev and Sons (BID ID -3156326)

Shree Builders (BID ID -3156206)

Haritwal traders (BID ID -3156623)