SPL REPAIR TO OVERHEAD ACSR CONDUCTOR BY CONVERSION TO LT UG CABLE AND CONNECTED ACCESSORIES AT BARAMULLA, SPL REPAIR TO SECURITY INFRA AND OVERHEAD CONDUCTOR AT GULMARG AND CERTAIN OTHER MINOR AND REVENUE WKS UNDER GE 969 EWS

Amount

Excavation in trenches in any type of soil, n exc 1.5 M wide and n exc 1.5 M deep for foundation, etc or for shafts, wells, manholes etc n.exc 10 Sqm on plan and n.exc 1.5m in depth and getting out in any type of soil complete all as specified and as directed.

Removing of excavated soil not exceeding 50m and depositing where directed at a level not exc 1.5 M above the starting point, complete all as specified and as directed.

Returning filling in incl spreading leveling, watering and well ramming in layers n exc 25 cm, complete all as specified and as directed.

M&L for sand cushioning to under ground cables with a layer of sand 8 cm before laying the cable and 15 cm after laying the cable, complete all as specified and as directed.

M&L for Sub class "B" bricks laid dry width wise across the line of cable in treanchs as cable protection, complete all as specified and as directed.

Supply and laying testing & Commissioning in trenches XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 Sq mm 4 Core, complete all as specified and as directed.

S&F Steel tubular swaged poles complete with MS base plate Continuously welded to pole, finial taper plug, bolts, nuts & screws as specified type 410 SP- 31 (09 metres long ) includind two coat of black bituminous paint internally throughout and externally upto embedded portion and including applying two coats of synthetic enamel paint over a coat of red oxide primer with black and white strip of 30 cm each upto 1.5 m height and two coats of aluminium paint over a coat of red oxide primer externally on remaining exposed surface aftereraction in position incl prepration of surface, including dismantling of existing poles, complete all as specified and directed. (earth work ,PCC and copping will be measured and paid for separately under respective item)

M&L cement concrete for foundation fillings and mass conctere type D2 1:4:8 using 40 mm graded aggregate complete all as specified and as directed.

M&L cement concrete for copying of poles using B1 1:2:4, 20 mm graded aggregate, smooth finishing without using extra cement complete all as specified and directed.

M&L cement concrete for foundation fillings and mass conctere type C2 1:3:6 (using 40 mm graded aggregate) complete all as specified and as directed.

Supply and Paint to security lights poles aluminium paint double coating after scrapping old paint with scrapper including 5 white and black strip of size 30 Cm and 1.5M from the ground level with painting of clamps and repairing Note: Ladder for painting is provided by the contractor

S&F LED street light fitting 70 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

S&F GI light grade tubing 40mm for UG cable upto junction box of security lght pole and cable laying, complete all as specified and as directed.

S&F Junction Box for security lights poles fxing with clamps nut bolts with provision of cable in and out Size 300x200x125mm with arrangement for connecting cable made of FRP rectangular shaped IP rating 65 corrosion resistance water proof /Flame proof with On/Off function complete all as specified and as directed.

S&F copper cable 1.5 sqmm 3 core from junction box to security lights, complete all as specified and directed.

S&F Earthing to connected pair of 5 poles at a frequent distance Earthing complete with galvanised steel earth plate electrode 60x60cm. x 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.Omm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion Complete all as specified and as directed.

Supply, laying UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 185 sq mm 3.5 core

Supply, laying UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 120 sq mm 3.5 core

Supply, laying UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 70 sq mm 3.5 core

Supply, laying UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 50 sq mm 3.5 core

Supply, laying UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 3.5 core.

Supply, laying UG cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core.

M&L for earthing with galvanised iron eath plate electrode 600mm x600mmx 6mm thick burried directly in ground (Earth pit not less than 2.25 mtr deep below normal ground level ) with top edge of earth plate not less than 1.5 metres below normalground level, inclusive galvanised iron strip 32x6mm as eath strip connected to earth plate electrode by means of bolts, nuts,check nuts and washers,earth wire protected with and including 40 mm bore light grade ISI marked GI pipe upto 7.5 meters long alI as shown in electrical plate no 5 of MES schedule part-1,with and including PCC 1:2:4 type B1 pit with cover of RCC 1:2:4 type B1.reinforced with welded steel wire fabric not less than 4 kg per sqmtr with handle and angle iron frame,watering arrangment with 20 mm bore Gl medium grade pipe ISI marked,GI funnel with GI mesh,filling with mixture of common salt and charcoal,necessary excavation, refilling, removing away spoil and B32 earth work in any type of soil, including test point, testing and commissioning complete all as specified and directed.

Supply and laying GI pipe 80 mm bore light grade with fitting for cable protection, complete all as specified and as directed.

M&L for Hot Press moulded SMC boxes with 200 Amps rating busbar, MCB and distribution board (Make : Sintex Product Code GSJB-2014 or equivalent and single core PVC FRLS single core copper conductor 2.5 sqmm in PVC conduit 20mm dia for connecting from junction box to street light complete including MS Clamps fabricated from 25x6mm MS flat iron, nuts, bolts etc for mounting complete all as specified and directed. Note: The rate for MCB's, PVC Cable, PVC conduit will deemed to be included in quoted rate

Dismantling old and unsv cross arms complete all as specified and as directed.

Dismantling HT/LT OH line (ACSR Conductor), complete all as specified and as directed.

Dismantling Insulator of any size and type,complete all as specified and as directed.

S&F 3 Phase Prodigy (SECURE) Distribution Transformer Meter with built-in current transformers, energy audit and system analysis, direct connected 3Ph 4 Wire 415V with current range 40-200A, accuracy class 1.0, frequency 50 Hz, Insulation Class - Protection CIass II, Impulse withstand 10 KV, IS-13779, Dimensions (W x H x D) 365 x 283 x 221mm (with extended terminal cover) complete all as specified and as directed.

S&F Three Phase, 4 wire LCD AC Static Watt Tamper Proof energy meter digital display, current 10-60A, 3x240V class 1.0, Imax -60 Amp all as specified and as directed. Note : all necessary fittings required for fixing meter is deemed to be included in quoted rate.

S&F Single Phase Tamper Proof energy meter digital display, current 10-60A, , Phase 1, 2 wire all as specified and directed Note : all necessary fittings required for fixing meter is deemed to be included in quoted rate. Model No - EM101(L&T) or equivalent in approved make

Supply only 4 Sqmm FRLS copper conductor with casing caping complete all as specified and as directed.

Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable, of size 4 Sqmm, PVC insulated, unsheathed, fire retardant, low smoke (FRLS) drawn through and including PVC capping & casing not less than 25 mm wide with all necessary fitting and including one run single core multistranded copper conductor cable, of size 4.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling complete. Note :- 2 Runs of main cable and one run earth wire with capping & casing will be measured as one RM for payment.

Supply & installation, testing commisioning for 11 KV Trivector Meter with PT ratio 11000/110V and CT ration 100/5A, class of accuracy 0.5 with switch board, outdoor type made out of 3.15 mm thick CRCA sheet and MS angle iron frame with weather proof canopy, mounted on PCC pedestal, cubical type, front and rear side openable, compartment type with hinged door lifting lugs 2 Nos, earthing strips at rear side, bottom detachable gland plate complete with suitable size zinc and passivated nut,bolts spring and washers and locking arrangement for each compartment, provision of air vent, dust and vermin proof, provision of cable type floor mounting, 11 KV CT-PT meter cubical unit alongwith trivector meter, HT cable, 2.5 Sqmm 14 Core control cable (Note :- The cost of CT, PT, HT cable of Size 95 Sqmm 3 Core, Control cable for connection 2.5 Sqmm 14 Core, necessary nuts and bolt required for fixing is deemed to be included in quoted rate)

Supply, installation, commissioning of Metal Top Deep Freezer of capacity 500 Ltr, single phase 240 volt, 50 Hz complete all as specified and as directed.

S&F in replacement voltage stabilizer copper wound for automatic operation, single phase naturally air cooled indoor type wall mounted & designed for input variation between 100/110V to 250V with output voltage stabilized at 230V with accuracy of + 2.5% of capacity 3 KVA complete all as specified and as directed.

M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC unsheathed cable into and including wooden board with bakelite sheet and PVC insulated fire retardant cable of size 2.5 Sgmm as earth continuity conductor.

S&F switch piano Flush type, single pole15 amp 240 volts, complete all as specified and as directed.

S&F Socket outlet 2 in 1, 3 pin, 5 and 15 Amps, flush type complete all as specified and as directed.

Note:- Schedule of credit Rs.1,35,600.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents.

M/S KULBIR SINGH SODHI AND CO

M/S Khan Hussain & Co.

M/S Sky Engineers