Tender for the furnishing of faculty cabins at IIM Tiruchirappalli

Amount

Providing Cupboards with openable glass shutters with aluminium anodized frames and with built-in BWP 19 mm ply with 1mm thick approved laminate on both sides, including locks, tower bolts, etc, complete as per the ref image and site condition. Size -1.90 m (width) x 2.1 m (Height) x 0.4 m (depth)

Providing and fixing Running counter of width as specified made of 19mm thick & 12mm thick BWP ply fixed on ply supports as per image All exposed surfaces to be finished with 1mm thick laminate of approved shade and colour, edges to have 2mm thick PVC edge binding etc., all complete as per site condition and as directed by Engineer In-Charge. Measurement shall be taken on the plan area without deductions for socket openings. Counter depth varies Size - 2.25 m (length) x 0.6 m (Width) x 0.75 m (Height)

Size - 3.35 m (length) x 0.45 m (Width) x 0.75 m (Height)

Providing & fixing Laminated Over Head Storage Unit of sizes as mentioned below with 19mm thick ply top, bottom, sides and intermediate members, 19mm thick ply shutters. All exposed surfaces to be finished with a laminate of approved shade and colour, and internal surface to be finished with 0.80mm thick laminate of approved shade & colour. The rate includes the cost of 19 mm-thick ply for shutters, intermediate shelves, 19 mm-thick ply backing, and the cost of self-closing hinges. Providing and fixing 12mm-thick ply, 30mm deep recessed at the bottom of the storage unit to accommodate light fixtures. All edges to be covered with 2 mm-thick PVC edge binding. etc, all complete. Measured net area in elevation (Length x Ht). Overhead Storage - 2.70 m (Length) x 800 mm (height) x 400 mm(depth)

Providing & fixing of the rectangular table of sizes as mentioned below, made of 19mm thick plywood and 12mm thick BWP ply of 100mm wide on the periphery of the table. Table to be supported on 50 mm thick supports made of 2 nos. 19mm thick ply and 1 no. 12mm thick BWP ply resting on rectangular rubber plugs as per the image. All exposed surfaces to be finished with 1 mm thick laminate of approved shade and color. Size-1.7 m (length) x 0.75 m (width) x 0.725 m (height)

Providing and fixing Fabric wrapped soft board panels 12mm thick of size and profile as per detail with grooves made at the junction of soft board panels. Soft Board to be fixed on a backing of 12 mm BWP ply. The rate should include cladding the panels in approved fabric, foam infill as per approved specification, and providing teak wood edge beading (25mm x 12 thk) all along the boundary of the soft board panel. The foam infill is to be 4mm thick and of the required resistance to permeability and insulation to water and temperature as per the direction of the Engineer in Charge. Note the fabric shall be stretched uniformly along the directions of weave making square/straight edges of fabric wall panels in pinup board i/c required screw/adhesive etc., and shall be wrinkle free etc., all complete as per std specification

Providing and fixing a writing board 6mm thick. Lacquered glass fixed to the partition with 9mm BWP ply backing and framing all around with aluminium hat sections and provision for pen holder etc., all complete as per the image

Supplying and placing in position the Pedestal Drawer unit (Credenza) (as per image attached) is made of 19mm thick BWP ply wood. All the exposed edges are sealed with 2 mm-thick PVC, with imported edge banding on the sides and bottom. The top and drawer facia is sealed with a 2 mm thick PVC edge. The drawer unit consists of two box drawer facia that are sealed with 2mmthick PVC edge. The drawer unit consists of 2 box drawers and 1 file drawer. The sides of the Inside drawer box are of pre-laminated particleboard. The drawer box is fitted with a roller Slide for free movement. The drawer unit is provided with a central locking system, where the three drawers are locked with one key. PVC recessed handles are provided for easy opening and closing drawer. The drawer unit is fitted with castors (optional) for easy mobility. PVC edge banding Shall be of approved make. The complete furniture unit is factory assembled with knock-down fittings. The pedestal is fitted with an additional (5th) castor to avoid toppling of the pedestal in case of opening of any /all of the 3 drawers, all complete as per directions of the engineer-in-charge Size-0.80m(width)x0.60m (height)x0.40m (depth)- Drawer type

Size - 0.80 m (width) x 0.60 m (height) x 0.40 m (depth). Openable shutters

Providing wall paneling with 12mm thick BWP plywood finished with laminate of approved shade and color to the wall with necessary hardware etc., all complete as per the detail design and drawing and as directed by Engineer In-Charge

Supplying of Medium back chair with push-back tilting mechanism with a minimum of one-point locking system to enable seating comfort, high density molded fire-retardant PU foam for seat and backrest, ABS cover for seat, height-adjustable back, pneumatic seat height adjustment, Nylon base with hooded twin wheel nylon castors all complete as per standard specifications.

Supplying and applying a two coats of interior wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour and applying putty and primer for the required area including all necessary items etc all complete as per standard specification.

Electrical re-fixing and rewiring work: (i) Dismantling of existing 2 Nos. 6A switch & socket units and 1 No. fan regulator and 4 Nos of switches in each room, including removal without damage for reuse. (ii) Re-fixing and wiring of 2 Nos. 6A switch & socket units and 1 No. fan regulator in each room, including wiring for 5 points (power + fan) using ISI-marked FRLS copper wire through ISI-marked PVC conduits, supply and fixing of the modular box, faceplate, accessories, etc., complete as per standard specifications. (iii)Supply and laying of ISI-marked PVC conduit (20mm dia) with necessary accessories such as bends, junction boxes, clamps, etc., recessed or surface-mounted as per site condition. Make: CPWD-approved brand (iv)Civil works: Chipping of walls for conduit laying, including cutting, refilling with mortar, painting and surface finishing (plastering/putty) to restore the original condition.

Arian Infra (BID ID -3267045)

THE KARAIKUDI CARPENTARY AND BLACKSMITHY MULTIPURPOSE INDUSTRIAL UNITS (BID ID -3261917)

CROWN ENTERPRISES (BID ID -3266766)

ANGARAKA WOOD WORKS (BID ID -3265421)