Construction of Pauri-Devprayg Motor Road From Dandapani Market To Kadath And Khandah Motor Road .

Amount

Excavation of Hill side in marked aliganment between the said chainage for marking the road 5.20 m wide on straight reaches with extra widening on curves as specified and shown on the road plan and L section in all type of soil, Rocks and shales and inculding the disposal of surplus material up to 1.00 Km from the road and all lead and lift and including removal of trees with roots, bushes and final dressing of road including supply of all material. labour, T&P e.t.c for poper completion of the work as per direction of Engineer-in-charge From Chainage 0/20 to 2/30

Removal of Unsuitable Soil with Disposal cu.m Removal of unsuitable soil including excavation, loading and disposal upto 1000m lead but excluding compaction ground supporting embankment subgrade replacement by suitable soil, which shall be paid separately as per Clause 303.5.2 as per Technical Specification Clause 302.3.11

Clearance of land slides in soil and ordinary rock by a bull-dozer D cu.m 80 A-12, 180 HP and disposal of the same on the valley side

The maintenance of side drains including minor slipe erosion, repair, clearing, reshaping, depending of side drains and Patries on both side of road as per technical specification. Clause 1907

Maintenance of slab culverts by way of clearing, cleaning, erosion, repair to cracks, parapet wall and protection work as per drawing and technical specification. Clause 1908

Excavation for Structures Earthwork in excavation for structures as per drawing and technical specificationsClause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing ofsides and bottom and backfilling in trenches with excavated suitable material. Ordinary soil

Providing concrete for plain/ reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 P.C.C grade M 10 Nominal mix 1:3:6

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 In cement mortar (1:5)

Hand Packed stone filling in back of wallls including cost of all materials, royality, T&P etc. complete as per direction of Engineer-in- charge. (As per PWD Uttarakhand specifications

Providing and laying reinforced cement concrete in open foundation as per drawing and technical specifications Clauses 800, 803, 1202 & 1203 R.C.C M 25

Supplying, fitting, and placing TMT bar reinforcement in substructure complete tonne as per drawing and technical specifications Clauses 1002, 1010 and 1202. (The reinforcement steel shall be as per clause no. 2011.3.1 of specifications (First Revision'2014) and IS 1786:2008 clause no. 1.6)

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Plain/reinforced cement concrete in open foundations complete as per drawings and technical specification Clauses 802, 803, 1202 ans 1203 Nominal mix 1:2:4

Cement Concrete (PCC M-30) Pavement:- Construction of Un-reinforced, Cement concrete pavement, thickness as per design, over a prepeared sub base with 43 grade cement or any other type PCC Grade M-30, coarse and fine aggregates conforming to IS: 383,maximum size of coarse aggregate not exceeding 25 mm, mixed in aconcrete mixer of not less then 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (Steel channel, laying and fixing of wedges, steel plates including levelling the formwork and laying and fixing of 125 micron thick polythene film, as per drawing), spreading the concrete with shovels, rakes, compacted using needle, and plate vibrators, finished in continuous operation and curing of concrete slabs for 14 days, using curing compound where specified and water finishing to lines and grade as per drawings and technical specifications.

Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all lead, lift and disposal of surplus material as per direction of Engineer-in-Charge, as per Drawing and Technical Specifications Clauses 305.1 of Mord Specification

Cement plum Masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. as per drawings and technical specifications Clause 802, 803, 1202 & 1203 of MORD Specifiction.

Random Rubble stone masonry for structure laid dry by locally available approved stone, including supply of all materials, labour, T&P etc required for proper completion of work as per drawing & as per specification for retaining walls, breast walls & other similar structures as directed by Engineer-in-Charge.

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203 of MORD Specifiction

Providing and laying of boulder apron laid in wire crates with 4 mm dia G.I. Wire conforming to IS: 280 & IS: 4826 in 100mm x 100mm mesh (woven diagonally) including 10% extra for laps and joints laid with stone boulders weighting not less than 25 Kg each as per drawing and technical specification of and as directed by Engineer in charge.

Longitudinal Katcha drain

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 In 1:4 cement mortar

Providing and fixing of semi refelctive cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5mm thick MS sheet duly stove white coulour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per clause 1701.3.9 of MORD for Rural Roades of required shade and colour supported and wlded on 47mm x47mm x12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600mm, 600 mm below ground level as per approved drawing clause 1701.2.2800mm x600mm rectangular.

Providing and fixing Logo of RWD Project each providing and fixing of typical RWD informatory sign board with logo as per MORD specifications and drawing. There MS Plates of 1.6mm thick, top and middle plate duly welded with MS aflat iron 25mmx5mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25mmx25mmx5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mmx75mmx75mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mmx450mmx600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x47mm of 12SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superor quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing clause 1701 and annexure 1700.1

Construction of reference pillars(totally under ground) of length km200mm, width 200mm and height 300mm) as per Fig. 1600.1 (b)and Technical Specification Clause 1602.1 of specifications for rural roads.

Construction of back pillars , of length 300mm, width 300mm and km height 400mm of which 100 mm shall be below ground level as per Fig. 1600.1 (b) and Technical Specification Clause 1602.3 of specifications for rural roads.

rajbir singh rana