CA NO GE SOUTH AMB 03 2021 2022 REPAIR TO FLOOR TILING ALUM DOOR WINDOW AND MISC B AND R WORK IN MH AMBALA 2 CDU AND SHO OF AGE BR II UNDER GE SOUTH AMBALA CANTT

Amount

Dismantling floor hearth or wall tiling including terrazzo tiles/ cladding including cement mortar bedding (but not backing) and removing from site and rubbish off the premises complete all as specified and directed.

Material and labour for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as levelling course laid and compacted in slope, in floor where required complete all as specified and directed.

Material & Labour for Vitrified ceramic tiles 10mm thick, light shade (square / rectangular) polished, area of each tiles n exc 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl. 15mm thick screed bed in CM 1:4 complete all as specified and directed.

Material & Labour for Vitrified tiles 10mm thick (square / rectangular) polished, as in skirting / dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl. 10mm thick backing coat in CM 1:3 complete all as specified and directed.

Material & Labour for Non - skid coloured ceramic tiles 7 to 8 mm thick, light shade (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified and directed.

All as per item no 5.00 above but in vertical surfaces as in skirting / dados etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl. 10mm thick backing coat in CM 1:3 complete all as specified and directed.

Material & Labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick , dark shade (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including cement screed bed 15mm thick in screed bed (1:4) base, complete all as specified and directed.

Material & Labour for coloured glazed ceramic tiles (300x 450x 7mm thick) light shade in vertical surfaces and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:3 complete all as specified and as directed.

Material & Labour for 20 mm thick black granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and directed.

Material & Labour for 18-20 mm thick Machine cut Kota stone slab in flooring on treads, landing laid over 20mm thick cement mortar 1:4 screed jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

Material and labour for machine cut kota stone slab 16-18 mm thick laid on vertical surface and jointed & pointed with grey cement slurry mixed with pigment to match shade of the slab including cutting, waste, rubbing and polishing (Granite finish) but as in skirting over and including 10mm thick plaster in cement mortar (1:3) on brick work or concrete surfaces, complete all as specified and as directed.

Demolition of cement concrete(un-reinforced) of any descriptions, in ground floors not exc 150mm thick, above or below ground level complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 (using 40 mm grade stone aggregate) as in floor filling & mass concrete for sunken floor in WC/Bath etc, complete all as specified and directed.

Material and labour for water proofing treatment of sunken floor of WCs, bathroom, etc by applying of the following specifications complete all as specified. (i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc. and remove all loose /unsound material, dirt, dust etc. (ii) Applying cement slurry mixed with acrylic based polymer moodified cementitous composite compound coating. (iii) First layer of cement slurry @ 0.488Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.253 Kg/ Sqm and allow it to air dry for 04 hours. (iv) Second layer of cement slurry @ 0.242 Kg/sqm mixed with acrylic based polymer moodified cementitous composite compound @0.126 Kg/ Sqm and allow it to air dry for 04 hours followed with water curing for 48 hours. (v) 200 micron thick polythene film shall be pasted with help of adhesives over treatment. Note- Joints of WC/ Trap/ Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work.

Material and labour 75mm thick cement concrete 1:2:4 type B-2 using 40mm graded stone aggregate as in floor, finishing cement concrete surface , complete all as specified and directed .

Material and labour for 100 mm thick PCC 1:36 type C-2 (using 40 mm graded mechanically crushed stone aggregate) as in flooring finished fair and even complete all as specified and as directed.

Material and labour for Machine pressed precast concrete inter locking paver blocks of any shape and size conforming to IS 15658- 2006 of 60 mm thick M-35 grade with grey cement and pigment with glosey finish over 25 mm thick sand cushioning and including removing of debries out side MD land complete all as specified and directed..

Material and labour for 25mm thick, chequered cement concrete tiles, set, jointed and pointed in neat cement slurry with grey cement and pigment to match in floors ,over and including screed bed or bedding a layer of 20 mm thick cement mortar 1:6 complete all as specified and directed.

Material and labour for PCC type B-1 (1:2:4) using 20 mm graded aggregate as in kerbs of mud stops, rounded or chamfered on edges , etc complete all as specified and directed

Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including Dado any description complete all as specified and directed

Material and labour for 15mm thick rendering on fair faces of brick or concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15 mm thick rendering on brick or concrete surfaces in CM 1:4 with, finishing the surface even and smooth without using extra cement complete all as specified and directed

Material and Labour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day. NOTE : - Further treatment over the surface so achieved will be carried out only after approved of the same by GE.

Material & Labour for rendering 10mm thick in CM (1:3) on ceiling surfces finished even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper with hand roller, over a coat of alkaline resistant primer over a coat of birla wall care putty surface complete all as specified and directed.

Material and labour for preparation of newly plastered surface and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed

Material and labour for preparation of ceiling surfaces and applying two coat of white wash on newly plastered surface of ceilings complete all as specified and directed

Dismantling wall lining, board or insulation boards, any thickness, including cover fillets complete all as specified and directed

Supply & fixing of 5 mm thick plain colour PVC sheet, solid PVC wall paneling/ lining PVC sheet inclusive of solvent cement and fixing at site on over PVC fillets frame of (600x 600 mm box type) including 5 mm thick PVC sheet fillets of width 35 mm for wall paneling/lining inclusive of fixing on wall to make PVC frame as per specification complete all as specified and directed

Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fixing steel water tubing of 15 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed .

Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed.

Supply and fixing steel water tubing of 20 mm bore, medium grade galvanized with provision of all new fittings as required, laids in floor , wall and on ceiling, complete all as specified and directed .

Material and labour for cutting chases for concealed water tubing and making good, cutting not exc 10 cm girth complete all as specified and directed .

Material & Labour for PVC water storage tank 500 Litre capacity HDPE triple layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, ISI marked complete all as specified. including dismantling of old tanks of of any description complete all as specified and directed.

Material & Labour for PVC water storage tank 1000 Litre capacity HDPE triple layer ISI marked fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMT with, ISI marked complete all as specified. including dismantling of old tanks of of any description complete all as specified and directed.

Supply & fixing (in repair) 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified and directed.

Supply & fixing (in repair) stop cock, fancy type, chromium plated, long shank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends suitable for 15mm bore pipe, complete all as specified and directed. (Note : Weight of stop cock shall not be less than 0.575 Kg)

Supply & fixing (in repair) CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified. (Note : Weight of bib tap shall not be less than 0.575 Kg)

Supply and fixing (in repair) for vitreous china squatting pan of orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of any pattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified and directed.

Supply & fixing (in repair) vitreous china wash down water closet pedestal pattern (EWC), White including connection to trap and to flushing pipe with ‘P’ or ‘S’ trap, making good to floor, plastic water closet seat cover with mild steel chromium plated hinges and chromium plated jet spray with 1.5 meter flexible LDPE pipe jointed with pipe complete all as specified and directed.

Supply & fixing (in repair) vitreous china urinals, flat back of size 465mm x 355mm x 265mm,white with grating and union for discharge pipe including, PVC waste pipe complete all as specified and directed.

Supply & fixing (in repair) vitreous china half stall urinals,white, complete including providing and fixing plugs, securing urinals to plugs with and including 60mm long brass screws, fixing flush pipe, grating and union for discharge pipecomplete all as specified and directed.

Supply & fixing (in repair) vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated pillar tap, PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including 32 mm dia PVC waste pipe etc., complete all as specified and directed.

Supply & fixing (in repair) vitreous china, white coloured, counter top wash hand basin, oval type, size 550x 400mm including cutting for and pinning in, but excluding waste pipe complete all as specified and directed.

Supply & fixing (in repair) 10 litre capacity Flush polypropylene cistern, ISI marked, white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified and directed.

Supply & fixing (in repair) mixer for WHB (hot & cold), cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with long screwed shanks and fly nuts, fancy type screwed for iron pipe and fixed bore of pipe 15 mm, complete all as specified and directed.

Supply & fixing (in repair) for fancy type pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Supply & fixing (in repair) Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brakects guard and railing 60cm long complete all as specified and directed.

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area not exceeding 1.5 Sqm each and removal from site including iron mongry hold fasts etc., complete all as specified and directed.

Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), area exceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete all as specified and directed.

Taking down shutter of any descritption exc 1.00 sqm each but not exc 2.00 sqm each including removal from site complete all as specified and directed.

Supply and fixing Factory made pressed steel frames for doors fabricated from 1.25 mm thick sheet, with one or more rebate including necessary fixing lugs, hinges, lock strike plate, etc. and one shop coat of priming, frame size 125 x 60 mm, complete all as specified and directed.

Supply and fixing factory made shutter, 35 mm thick, 2nd class hardwood (Hollock) rail and style, plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated, complete all as specified and as directed.

Supply and fixing IInd class (hollock) factory made 35mm thick glazed skelton door shutters, open rebated and prepared to receive glass, gauge etc. divided into squares edges of framing, plain, chamfered or rounded, mitred fitted with cut and mitred beads for securing glass/gauge etc. with sizes of members of shutters as specified in para 8.24(a) of SSR 2009 (Part I), complete all as specified and directed.

Supply and fixing factory made PVC hollow door frame of size 50mm x 47mm with wall thickness of 5 mm made out of extended 5 mm rigid PVC foam sheet cut at corner and jointed with 02 Nos, 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided through out the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos of screws to be provided for each vertical numbers & minimum 02 Nos for horizontal member) complete all as specified and directed.

Supply and fixing Factory made solid PVC moulded door shutter, 28 to 30 mm thick (stiles) with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2 mm plain colour PVC sheet on back face including fixing in frame at site with 03 Nos SS hinges, 02 Nos aluminium tower bolt 150 mm, 02 Nos aluminium handle 150 mm for each shutter all as per specification & drawing complete all as specified and directed.

Supply and fixing steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skelton shutter, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on CECZ Chandigarh drawing No.. TD-219(c) sheet 1/3 to 3/3 and TD-220(c) sheet 1/3 to 3/3 as applicable NOTE : - (i) For the purpose of measurement and payment double shutter with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawing. (iii) Glazing, wire mesh and painting shall be measured and paid for separately.

Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised .complete as specified and directed .

Supply and fixing 200mm long aluminium anodised barrel tower bolts of extruded section .complete as specified and directed .

Supply and fixing (in repair) anodised aluminum door shutters, including jointing cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, hinges, floor adjustment, secrewing / tightening the shutter etc. complete all as specified and directed.

Supply and fixing double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed etc, complete all as specified and directed.

Supply and fixing (in repair) Aluminium body door closer for aluminium door shutter hydraulically regulated, designation No 1 universal type,suitable for door shutters up to 700mm in width and of weight not more than 35 kg and fixed complete all as specified and directed.

Supply and fixing aluminum alloy door closer hydraulically regulated, desination No 3 universal type, suitable for door shutters of 851 to 1000mm in width and weight between 61 to 80 Kg and fixed to door frame complete all as specified and directed.

Supply and fixing for powder coated aluminum frame (minimum thickness of powder coating 50 micron) as in door/ wondows and partitions , etc with one or more rebates including hinges, handles, jointing cleat for fixing etc. complete all as specified and directed.

Supply and fixing 5.5 mm thick tinted glass in square exc 0.5 sqm in each pane with heat reflecting properties , fixed to aluminium frame or door with glazing clips, etc., complete all as specified and directed.

Supply and fixing (in repair) of mortice lock with two levers (vertical type), mild brass body in aluminium door complete all as specified and directed.

Supply and fixing (in repair) Sheet glass 3 mm thick, ordinary quality and glazing with oil putty or wooden bead in squares not exceeding 0.5 Sq. m in each pane, complete all as specified.

Supply and fixing (in repair), galvanized steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staple and including fixing with beads supplied with joinery when fixed in panels of joinery, complete all as specified and as directed.

Supply and fixing PVC cabinet mirror of confirming to ISI complete all as specfied and directed.

Supply and fixing (in repair) CP Hand shower (Health faucet) including 1.50 meter long flexible tube, complete all as specified and directed.

Supply and fixing 150 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and directed.

Ashwani Kumar

PARVEEN KUMAR

peeyush construction and engineering co

Karishan Kumar goel

OJHA ENTERPRISES

Shiv Construction Co.

JMB BUILDERS & ASSOCIATES