Operation, running and maintenance of Sewerage System 0.41 MLD capacity along with Sewer network in the various buildings at main campus Nauni, Solan.

Amount

Operation, running and maintenance of STP along with component and whole sewerage? Sullage net work in the existing buildings and to be included in feature during three year’s period in the campus. The clearing of blockage of pipes in internal/ external of the whole buildings, net work and man holes.. Clearing compliance of complaints with in twenty four hours, otherwise penalty will be imposed @ Rs.1000/- only per day. The other terms & conditions are also appended to be part & parcel of the work agreement etc. complete in all respect as per satisfaction of Engineer-in-Charge. The sanitary supervisor will also be provided to inspect the whole sewerage/ sullage net work and other work to be assigned by the Engineer-in-Charge. * Man power:- One no. electrician ITI qualified, Six nos. attendant/helper/sewer man & One no. sanitary supervisor

Providing and fixing RCC man hole cover and frame ISI marked 12592-2002 inside size opening / access 450 x 600 mm and 50mm thick embedding with 20mm thick cement mortar 1:2 mix in the existing man hole slab after removing the debris material etc as required complete in all respect as per satisfaction of Engineer-in-charge.

Providing and fixing RCC Gully cover and frame ISI marked 12592-2002 inside size opening / access 300 x 300 mm and 40mm thick embedding with 20mm thick cement mortar 1:2 mix in the existing gully trap slab after removing the debris material etc as required complete in all respect as per satisfaction of Engineer-in-charge.

Excavation work by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within aii leads, lifts etc complete in all respect as per satisfaction of Engineer-in-Charge. a).Ordinary rock.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering up to plinth level etc complete in all respect as per satisfaction of Engineer-in-Charge. a).1:3:6 (One Cement : three sand : six graded stone aggregate 20 mm(twenty milimetre) nominal size.

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement up to plinth level etc complete in all respect as per satisfaction of Engineer-in-Charge.: a).1:1.5:3 (One cement : one & half sand : three graded stone aggregate 20 mm(twenty milimetre) nominal size.

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement etc complete in all respect as per satisfaction of Engineer-in-Charge. a).1:1.5:3 (One cement : one & half sand : three graded stone aggregate 20 mm(twenty milimetre) nominal size.

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement etc complete in all respect as per satisfaction of Engineer-in-Charge. a).1:1.5:3 (One cement : one & half sand : three graded stone aggregate 20 mm(twenty milimetre) nominal size.

Centering and shuttering including strutting, propping etc. and removal of form work etc. complete in all respect as per satisfaction of Engineer-in-Charge.

a). Foundations, footings, bases of columns, etc. for mass concrete

b). Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

c). Suspended floors, roofs, landings, balconies and access platform

d).Edge of slabs and breaks in floors and walls under 20 cm wide

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding etc.. complete in all respect as per satisfaction of Engineer-in-Charge. a). Cold twisted bars

Cement concrete flooring 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (twenty milimetre) nominal size) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete in all respect as per satisfaction of Engineer-in-Charge.. a). 40 mm(forty milimetre) thick.

Providing & fixing White vitreous china water closet squatting pan (Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material including malba, all complete as per the direction of Engineer-in charge (Cera/ Hindware make. a). Orissa pattern W.C Pan of size 580x440 mm

Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. a). Nominal concrete 1:3:6 or richer mix including equivalent design mix).

Dismantling C.I. pipes including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means breaking lead caulked joints, melting of lead and making into blocks including stacking of pipes & lead at site within all lead as per direction of Engineer-in-charge. a). Upto 150mm diameter.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) water closet pan including cutting and making good the walls and floors wherever required etc complete in all respect as per satisfaction of Engineer-in-Charge (Cera/ Hindware make).

Providing and fixing 8 mm dia CP/ SS jet with flexible tube one metre long with SS triangular plate to European type WC of quality and make as approved /satisfaction of Engineer-in-Charge.

Providing and fixing white / black solid plastic seat with lid for pedestal type water closet pan etc complete in all respect as per satisfaction of Engineer-in-Charge (Cera/ Hindware make).

Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures etc. complete in all respect as per satisfaction of Engineer-in-Charge (Cera/ Hindware make) a). 10 litre capacity – White

Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etc. concealed pipe, including painting with anti corrosive bituminous paint, cutting chases and making good the wall etc. complete in all respect as per satisfaction of Engineer-in-Charge.(Jindal/ Surya make) a). 15 mm dia nominal bore.

Providing and fixing plasticized PVC connection pipe with brass unions etc. complete in all respect as per satisfaction of Engineer-in-Charge. a). 15 mm nominal bore and 45 cm long

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality etc. complete in all respect as per satisfaction of Engineer-in-charge(Smile/ Seiko/ sparton make).

Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast make).

a)110mm( one hundred ten milimetre) dia

b). 150mm(one hundred fifty milimetre) dia

Providing and fixing PVC plain bend ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast make). a) 110mm( one hundred ten milimetre) dia

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3mm thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast make). a) 110mm( one hundred ten milimetre) dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete in all respect as per satisfaction of Engineer-in-charge (Finolex/Vectus/D-plast make).

a) 110mm( one hundred ten milimetre) dia

b) 150mm(one hundred fifty milimetre) dia Note:- The except item no. 1, the remaining items have been taken notionally these items also pertain to item no. 1 for smooth functioning of system. The quantities can be increased/decreased as per requirement during this period. The prior approval of the competent authority is required before execution of these items as well as extra items if any.

Shah Jahan