Pr No-293/24-25 Construction Of Mini MCF in Various Wards

Amount

Mini MCF

10.2:Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

OD270391/2024-2025:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required

13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work

12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2

13.71:Lettering with black Japan pint of approved brand and manufacture

SOCIO ECONOMIC UNIT FOUNDATION (BID ID -1998307)

SUNIL KUMAR S (BID ID -1995386)

Ettumanoor Vanitha Labour Contract Cooperative Society LTD No.K1240 (BID ID -1991958)

AJIMON K R (BID ID -1998234)

steel industrials kerala ltd (BID ID -1996711)

Thampy Thomas (BID ID -1995074)

SANTHOSH THOMAS (BID ID -1995108)

Bidder Name

SANTHOSH THOMAS

SUNIL KUMAR S

AJIMON K R

Thampy Thomas

SOCIO ECONOMIC UNIT FOUNDATION

steel industrials kerala ltd

Anish Kumar K.S.

Ettumanoor Vanitha Labour Contract Cooperative Society LTD No.K1240