PROVN OF CAR/MOTAR CYCLE PARKING STAND NEAR QM SEC AT NIRDESH HQ, PROVN OF PAVER BLOCK AT OPEN CAR PARKING AREA NEAR CSD CANTEEN AND SCOOTER PARKING SHED WITH PCC HARD STANDING AT SINGLE JCO ACCN AND PROVN OF INTERLOCKING TILING OF TANK MUSEUM PATHWA

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Soft/loose soil, complete all as direced by Engr-in-Charge.

Removing excavated soil exc. 1.5km but n.exc. 5.0 km from the starting point and deposited outside of MD land.complete all as direced by Engr-in-Charge.

Removing excavated material exc.250m but n exc 500m and depositing where directed at a level n.exc.1.5 m above the starting point.

M&L Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified.

M&L Hard core gauge not exc. 63mm of broken bricks diposited spread and levelled in layers not exc. 15 cm watered and rammed to a true surface complete all as specified.

Hard core gauge not exc. 63mm of broken stone boulders diposited spread and levelled in layers not exc. 15 cm watered and rammed to a true surface complete all as specified.

M & L for 100 mm thick cement concrete in sub base for path/paving flooring type D-2, 1:4:8 (40mm graded stone aggregate) for laying cement concrete tiles.complete all as direced by Engr-in-Charge.

M & L for 75 mm thick cement concrete in sub base for path/paving flooring type D-2, 1:4:8 (40mm graded stone aggregate) for laying cement concrete tiles.complete all as direced by Engr-in-Charge.

M&L for 75 mm thick PCC 1:2:4 mix ,type B-2 using 40 mm graded stone aggregate finished even and fair without using extra cement as in path/hard standing complete all as direced by Engr-in-Charge.

Providing and laying 60mm thick factory made pre polished chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand;specified and directed.