REPAIR TO FALSE CEILING AND PANELLING IN VARIOUS ZONES AT KHUMBATHANG UNDER GE KHUMBATHANG

Amount

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings etc complete all as specified and directed by Engr-in-Charge.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed by Engr-in-Charge.

Dismantling timber scantlings as in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in framed work, in any position complete all as specified and directed by Engr-in-Charge.

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge.

Taking down Chowkhats or frames exc 1.5 Sqm but not exc. 4 sq. m each (without taking off shutters from the frames)complete all as specified and directed by Engr-in-Charge.

S&F 0.63mm thick, galvanised, corrugated mild steel sheeting with two corrugations side lap, fixed with self tapping screw or L-type or J-type or crancked hook bolts and washers as in roofs, walls etc, with grade of zinc coating 275, complete all as specified and directed by Engr-in-Charge.

S&F in repair 0.63 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge.

S&F in repair Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr-in-Charge.

S&F in repair for Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directd by Engr-in-Charge.

S&F in repair for 5.5 mm thick sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.

S&F in repair for steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed by Engr-in-Charge.

S&F in repair for 4.0 mm thick sheet glass, ordinary quality and glazing with oil putty in square n.exc 0.5 sq. m in each pane complete all as specified and directed by Engr-in-Charge.

S&F in repair for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples all as specified and directed by Engr-in-Charge.

M&L for providing precast cement concrete type C1, 1:3:6 (20 mm graded aggregate) in window or door cills, lintels, copings, bed plates, blocks for hold fasts etc and similar works with plain fair faces, including chamfers or slightly rounded, weatherings, throating etc. and setting in cement mortar (1:4) complete with joints to match complete all as specified and directed by Engr-in-Charge.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engr-in-Charge.

M&L for Precast cement concrete block masonry type C1 1:3:6 (using 20 mm graded aggregate) with solid blocks, exc. 10 cm in width and setting in cement mortar (1:4), complete all as specified and directed by Engr-in-Charge.

M&L for cement concrete type C1, 1:3:6 (using 20 mm grade aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed by Engr-in-Charge.

M&L for prepration of old painted wooden surface of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge.

M&L for rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe 410-W (Gde-E-250) quality-A and painted one shop coat of zinc chromate primer paint (including preparation of surface) at Contractor’s workshop before fabrication complete all as specified and directed by Engr-in-Charge.

S&F in repairs Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of specified colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

S&F in repairs Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engr-in-Charge.

M&L 9 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work as in ceiling complete all as specified and directed Engr-in-Charge.

M&L 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber frame work as in walls complete all as specified and directed by Engr-in-Charge.

M&L for Plain fillets of second class Hardwood, sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed by Engr-in-Charge.

All as per Srl Item no. 25.00 here-in-before but sectional area exc. 6 sqcm and n. exc. 13 sqcm complete all as specified and directed by Engr-in-Charge.

All as per Srl Item no. 25.00 here-in-before but sectional area exc. 3 sqcm and n. exc. 6 sqcm complete all as specified and directed by Engr-in-Charge.

All as per Srl Item no. 25.00 here-in-before but sectional area n. exc. 3 sqcm complete all as specified and directed by Engr-in-Charge.

S&F in repair 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with L-type or J-type or cranked hook bolts in roof and wall complete all as specified and directed by Engr-in-Charge.

M&L for Rendering 10 mm thick on fair faces of brickwork or concrete surfaces in cement mortar (1:6) and finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for 15mm thick cement plaster in cement mortar (1:4) on brick work or concrete surface and finished surface even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plaster surface and applying three coats of white wash on wall complete all as specified and directed Engr-in-Charge.

M&L preparing new plastered surfaces of walls including cornices, pillasters etc. and applying two coats of cement base paint over and including one coat of white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of old plaster surface and applying two coats of white wash on wall complete all as specified and directed Engr-in-Charge.

M&L for preparation of old plaster surface and applying one of white wash on wall complete all as specified and directed Engr-in-Charge.

M&L preparation of new or previously untreated steel surfaces and applying two coats of synthetic enamel over a coat of red oxide primer over 10 cm width/girth including filling with filler where reqd complete all as specified and directed by Engr-in-Charge.

M&L preparation of old painted steel & iron surfaces and applying two coats of synthetic enamel over a coat of red oxide primer over 10 cm width/girth including filling with filler where reqd complete all as specified and directed by Engr-in-Charge.

M&L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed by Engr-in-Charge.

M&L for 6 mm thick non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed by Engr-in-Charge.

M&L for Cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall complete all as specified and directed by Engr-in-Charge.

S&F in repair for Gl frame work of size 605 x 605 mm for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Engr-in-Charge.

M&L for Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed by Engr-in-Charge.

Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 95,966.00 and any other reduction if any from quoted amount.

M/S TRADE LINK

M/S Web Company

KASHMIR FAIR DEAL SERVICES

CHAMRAN TRADING NAD CONSTRUCTION KARGIL

MOHD HUSSAIN