LAC ADS 2022 23 Project No 17132 Construction of Division Office 3rd floor at Jala Bhavan Kaduthuruthy General Civil Work

Amount

App A - Construction of Third Floor

5.33.2:Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer - in-charge. Note:- Cement content considered in this item is @ 330 kg/ cum. Excess or less cement used as per design mix is payable or recoverable separately.All work above plinth level upto floor V level

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform

5.9.16.2:Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and wallsAbove 20 cm wide

5.9.16.1:Centering and shuttering including strutting, etc. and removal of form for: Edges of slabs and breaks in floors and wallsUnder 20 cm wide

5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers

50.6.2.3:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

50.9.5.1:Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including ISI marked M.S pressed butt hinges bright finished of required size with necessary screws. Using Anjili wood/ jack wood 35 mm thick shutters.

9.48.1:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.22:Extra for plastering exterior walls of height more than 10 m from ground level for every additional height of 3 m or part thereof.

13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)

11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.

11.37:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), including pointing the joints with white cement and matching pigment etc., complete.

11.38:Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of Ist quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 ( 1 cement : 4 Coarse sand), including pointing the joints with white cement and matching pigments etc., complete.

10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

17.2.1:Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:W.C. pan with ISI marked white solid plastic seat and lid

17.7.1:Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require:White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps

17.9.1:Providing and fixing kitchen sink with C. I brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste complete, including painting the fittings and brackets, cutting and making good the walls wherever required:White glazed fire clay kitchen sink of size 600x450x250 mm

50.18.9.12.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 10Kgf/cm2 External work- Exposed on wall

50.18.7.2.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer -in-Charge 20 mm dia 10 Kgf/cm2- Internal work - Exposed on wall

50.18.7.3.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10Kgf/ cm2- Internal work- Exposed on wall

50.18.9.13.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 25 mm dia 10 Kgf/cm2- External work - Exposed on wall

50.18.9.14.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10 Kgf/cm2 - External work- Exposed on wall

50.18.7.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 10Kgf/cm2- Internal work - Exposed on wall

50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall

50.18.9.17.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clip at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 6 Kgf/cm2 - External work - Exposed on wall

50.18.9.19.1:Providing and fixing PVC pipes including fixing the pipe with clamps/ clips/ at 1.00 m spacing . This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 6 Kgf/cm2 - External work- Exposed on wall

50.18.9.19.2:Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

18.18.2:Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete:20 mm nominal bore

18.17.2:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :32 mm nominal bore

18.17.4:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :50 mm nominal bore

18.17.5:Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :65 mm nominal bore

50.17.1.1:Supplying and fixing Stainless steel soap dish including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

50.17.1.2:Supplying and fixing CP Towel rod 45cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge.

50.18.9.22.5:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes including jointing with PVC solvent cement 110x110x110 mm dia Tee

50.18.9.22.1:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Elbow

50.18.9.22.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

50.18.9.22.6:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110x110x110 mm dia Door tee

50.18.9.22.8:Providing and fixing PVC moulded fittings /accessories for Rigid PVC pipes, including jointing with PVC solvent cement -110 mm dia Vent cowl

13.50.2:With ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood

13.62.1:Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade:Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture .

13.80:Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

OD53808/2022-2023:Supplying and fixing Nahini trap

OD53813/2022-2023:Supplying and fixing 110 mm Steel gratings

OD53819/2022-2023:supplying & fixing 15 mm long body steel tap (MR)

21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness

50.12.4.2:Providing and fixing false ceiling with 7.5 mm thick PVC wooden grains panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete ( aluminium frame work shall be paid separately)

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

9.18.1:Providing and fixing Pre- laminated flat pressed 3 layer ( medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer ( fittings to be paid separately)18 mm thick

App B - Electrification - Third Floor

OD53157/2022-2023:Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface I recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.

OD53202/2022-2023:Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required.<br>20 mm

OD53002/2022-2023:Wiring for light point/fanpoint/exhaust fanpoint/callbellpointwith1.5sq.mm FRLSPVC insulated copper conductor singlecore cable insurface Irecessed steel conduit,with modularswitch,modularplate,suitable Glboxand earthing the pointwith1.5sq.mmFRLSPVC insulated copper conductor single core cable etc. as required.

OD53001/2022-2023:Supply and fixing 20 mm one way terminal junction box conforming to IS 3419/1988 along with the PVC conduits laid in concrete

OD53271/2022-2023:Stepped type Modular Fan regulator (2 module)

OD53341/2022-2023:Supply and fixing 20 mm two way through junction box conforming to IS 3419/1988 along with the PVC conduits laid in concrete.

OD53357/2022-2023:Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

OD53367/2022-2023:Supply and fixing 20 mm three way tee junction box conforming to IS 3419/1988 along with the PVC conduits laid in concrete

OD53377/2022-2023:Wiring for independent plug point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface I recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required

OD53421/2022-2023::Supply and fixing 20 mm four way intersection junction box conforming to IS 3419/1988 along with the PVC conduits laid in concret

OD53430/2022-2023:Call bell point with piano type 6A bell push atoneend and 6 A, 3 plate ceiling rose at other end

OD53443/2022-2023::Supply and fixing 20 mm bend conforming to IS 3419/1988 along with the PVC conduits laid in concrete.

OD53454/2022-2023::Charges for cutting holes suitable for accommodating exhaust fans up to 305mm sweep including plastering colour washing etc. as required.

OD53574/2022-2023:Supply and fixing fan hook along with the PVC conduits laid in concrete

OD53578/2022-2023: :Supply and fixing the 20 mm dia light gauge PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

OD53579/2022-2023:Supply and fixing the 25 mm dia light gauge PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories on surface including making good the damages etc as required.

OD53651/2022-2023::Supply and fixing 20 mm dia light gauge of PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories in recess including making good the damages etc as required.

OD53654/2022-2023:Supply and fixing 25 mm dia light PVC Conduit conforming to IS 9537 / 1983 part III along with all required accessories in recess including making good the damages etc as required

OD53657/2022-2023:Supplying and fixing the 75 mm x 75 mm x 50 mm with 3 mm sizes sheet of M.S. Boxes made out of 1.60 mm thick sheet painted grey (both inside and outside ) in surface/ recess including phenolic laminated sheet covers of thicknesses noted along with screwed to the box as front cover with steel screws, cup washers etc. making good the surface, painting /colour washing etc. as required.

OD53659/2022-2023:Supply and drawing 1.50 sq mm 3 run PVC insulated , Copper conductor, Single core cable in the existing surface/recessed PVC/steel conduit/ PVC casing and capping as required

OD53660/2022-2023:Supply and drawing 2.50 sq mm 1 run PVC insulated , Copper conductor, Single core cable in the existing surface/recessed PVC/steel conduit/ PVC casing and capping as required

OD53663/2022-2023:Supply and drawing 2.50 sq mm 3 run PVC insulated , Copper conductor, Single core cable in the existing surface/recessed PVC/steel conduit/ PVC casing and capping as required

OD53680/2022-2023:Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of 2.50 sq mm 6 run sizes.

OD53696/2022-2023:Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of 4.00 sq mm 2 run sizes.

OD53697/2022-2023::Supply and drawing 650/1100 V grade PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of 4.00 sq mm 4 run size

OD53700/2022-2023:Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.

OD53702/2022-2023:Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required.

OD53900/2022-2023::Supply & fixing front plate ( White/Off white ) for modular boxes -1 module - ( Group B )

OD53907/2022-2023:Supply & Fixing 3 module moulded plastic box in recess suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (ROHS

OD53915/2022-2023:Supply & Fixing 8 module moulded plastic box in recess suitable for modular accessories in surface/ recess including making good the damages, colour washing etc as required (ROHS

OD53947/2022-2023:Supply & Fixing the 1/2 module white/ off-white types/ sizes of front plates on the existing modular boxes. (Group B)

OD53981/2022-2023:Supply & Fixing the 3 module white/ off-white types/ sizes of front plates on the existing modular boxes. (Group B)

OD53992/2022-2023:Supply & Fixing the 8 module white/ off-white types/ sizes of front plates on the existing modular boxes.(Group B)

OD54024/2022-2023:Supply and Fixing the 6 A SP 1 way switch & accessories in the existing front plates and giving necessary connections as required (Group B)

OD54032/2022-2023: :Supply & fixing 16A SP 1 way switch on the existing module plate, giving connections etc as required. ( Group B )

OD54048/2022-2023:Supply and Fixing the 6 A Universal socket & accessories in the existing front plates and giving necessary connections as required (Group B)

OD54052/2022-2023:Supply and Fixing the 6/16 A socket & accessories in the existing front plates and giving necessary connections as required (Group B)

OD54058/2022-2023:Supply and Fixing the 20 A socket of modular switches & accessories in the existing front plates and giving necessary connections as required (Group B)

OD54066/2022-2023:Supply & fixing 2 line RJ 11 telephone jack (Group A)

OD54075/2022-2023:Supply & fixing 6A charger socket 2 module for mobile charger, laptop on the existing module plate, giving connections etc as required. ( Group B )

OD54084/2022-2023::Supply & fixing shaver socket , 110/230V AC with transformer - 4M( Group B )

OD54094/2022-2023:S&F Cat 6surface mountable outlet with spring shutter front access .Prefered make: Legrand/Amp

OD54102/2022-2023:S&P of 2 meter double ended factory crimped CAT-6 mounting patch cord ( Molex )

OD54104/2022-2023::Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A, 240 V “C” curve DP MCB complete with connections, testing and commissioning etc. as required.

OD54176/2022-2023::Supply and installation of sheet steel, phosphatised and painted, dust and vermin proof enclosure of MCB DB including copper /brass bus bar, neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall , making<br>good the damages, colour washing etc. as required

OD54192/2022-2023:8 way (8 24) - double cover TPN vertical DB with provision for fixing MCCB as incomer and SP/TP MCB as outgoing (IP 42/43)

OD60984/2022-2023::Supply and installing 6 A to 32 A, 10 KA, SP MCB (C curve) suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required

OD54092/2022-2023:Supply and installing 6 A to 32 A, 10 kA, SP MCB (D curve) suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required

OD54088/2022-2023: Supply and installing 40 A, 10 kA, DP MCB (C curve) - suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required<br>

OD54072/2022-2023:Supply and installing 40 A, 10 kA, TP MCB (C curve) - suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required

OD54063/2022-2023:Supply and installing 40 A, 10 kA, 4 pole MCB (C curve) - suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required<br>

OD54053/2022-2023:Supply and installing 40 A, 4 pole, 30 mA RCCB - suitable for 50 Hz , AC supply conforming to IS 8828-1995/ IEC 60898 of the following current ratings in the existing enclosure and giving connections as required<br>

OD54001/2022-2023:Supply and fixing one number 40 A, 25 KA (Icu), 4 pole, current limiting type MCCB (Ics=100%Icu) with thermal magnetic release having adjustable OL (thermal setting - 80 - 100%) in the existing panel assembly as required.

OD53997/2022-2023:Supply and drawing bare earthing conductors 2.65 mm copper conductor (12 SWG) along with wiring/ cables and giving connection as required.

OD53979/2022-2023:Supply and drawing bare earthing conductors of 2.65 mm copper conductor (12 SWG) along with wiring/ cables and giving connection as required

OD53963/2022-2023:supply of superior quality copper earth socket 2 mm (14SWG) sizes of earth conductor including crimping etc. as required.

OD53938/2022-2023:supply of superior quality copper earth socket for2.65 mm (12 SWG) of earth conductor including crimping etc. as required.

OD53927/2022-2023:Supply and providing 25 x 3 mm brass bolt & nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

OD53922/2022-2023:Supply and providing 25 x 6 mm brass bolt & nut with washers on the existing MS box / earth bus etc. as required including drilling necessary holes as required

OD54427/2022-2023:Supply and providing 5 Kg. Dry Chemical Powder type Fire Extinguisher with hose and clamps including fixing it to wall as required.

OD53892/2022-2023:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade 4 core 10 sq mm with factory made using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

OD53890/2022-2023:Supply, laying and clamping of 1 no. PVC insulated and PVC sheathed armoured aluminium power cable, 1.1 KV grade of 4 core 6 sq mm sizes using clamps noted along with the cables, spacing of clamps not exceeding 60cms, making good the damages , colour washing etc. as required.

OD53876/2022-2023:Supplying siemens / tropodur type nickel plated Double compression brass cable gland for PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end termination suitable for 2/ 3/ 3/ 4 core cable of 6 sq mm sizes as required.

OD53864/2022-2023:Supplying siemens / tropodur type nickel plated Double compression brass cable gland for<br>PVC insulated and PVC sheathed armoured aluminium/ copper conductor cable 1.1 KV grade, and making end<br>termination suitable for 2/ 3/ 3?/ 4 core cable of the following sizes as required.

OD53857/2022-2023:Supplying and providing earth clamps for siemens/ tropodur type cable glands of suitable length and other dimensions noted along with each size of glands for the 4sqmm-16 sq mm with 12 mm wide x 1 mm thick clip sizes of cables as required.

OD53852/2022-2023:Supply and making cable core termination with superior quality(dowells) Aluminum cable socket for the following size of PVC armoured conductor cable of 1.1 KV grade as required (10 sq mm)

OD54508/2022-2023:Supply of superior quality aluminium tubular cable socket and making core termination of cables of 6 sq mm sizes including crimping etc. as required

OD245643/2022-2023: Supply, conveyance, installation, testing and commissioning of ceiling fans of the 400 mm sweep - 3 star rated sizes using standard accessories

OD245644/2022-2023:Cost of 1200 mm 16-20 wLED tube set

OD245765/2022-2023:High efficiency (100 lm/W) street light luminaire with peanut lens,cool white light, pressure die cast alu.housing having IP66 protection,UV stabilised plycarbonate cover,inbuilt power unit etc complete,giving connection and installing in the existing post (BRP409 LED CW 034 MR PC S1 PSU GR of M/s Philips make)(Vide data)

Appc - Providing Sheet Roofing in stair room

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

12.1.3:Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2

ADITHYA ENTERPRISES

Bidder Name

Sijimol George

ADITHYA ENTERPRISES