Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.8 LAccepted-AOC | L1 | Accepted-AOC L1 and Reasonable | |
| 2 | L2₹34.9 L+₹10,460 (0.30%)Rejected-AOC | L2 | Rejected-AOC Not Lowest | |
| 3 | L3₹39.1 L+₹4.3 L (12.4%)Rejected-AOC | L3 | Rejected-AOC Not Lowest | |
| 4 | L4₹41.7 L+₹6.9 L (19.9%)Rejected-AOC | L4 | Rejected-AOC Not Lowest | |
| 5 | L5₹42.0 L+₹7.2 L (20.8%)Rejected-AOC | L5 | Rejected-AOC Not Lowest |
| Sl No | Description | Qty | Unit | M/s.Santosh Kotarki L6 | M/s D.Krishna Varma L3 | AMAR CONSTRUCTION L5 | Mr Madhusudhan Kotarki L4 | Siddique constructions L2 | SAYED MUSTAQ AHMED L1 |
|---|---|---|---|---|---|---|---|---|---|
| 0.00Schedules of Works | |||||||||
| 1.00 | Surface excavation not exc. 30 cm deep averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed | 6,150 | SQUARE METRE | 100 ₹6,15,000 | 45 ₹2,76,750 | 127 ₹7,81,050 | 35 ₹2,15,250 | 43 ₹2,64,450 | 30 ₹1,84,500 Lowest |
| 2.00 | M&L Hardcore of Broken stone or boulders gauge n exc. 40 mm, deposited, spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. | 450 | CUBIC METRE | 2,200 ₹9,90,000 | 1,800 ₹8,10,000 | 1,337 ₹6,01,650 | 1,700 ₹7,65,000 | 1,300 ₹5,85,000 | 800 ₹3,60,000 Lowest |
| 3.00 | M&L Hardcore of Broken stone or boulders gauge n exc. 20 mm, deposited, spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. | 300 | CUBIC METRE | 2,400 ₹7,20,000 | 1,800 ₹5,40,000 | 1,557 ₹4,67,100 | 1,850 ₹5,55,000 | 1,390 ₹4,17,000 | 1,100 ₹3,30,000 Lowest |
| 4.00 | M&L Hardcore of Broken stone or boulders gauge n exc. 10 mm, deposited, spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed. | 148 | CUBIC METRE | 2,300 ₹3,40,400 | 1,800 ₹2,66,400 | 1,777 ₹2,62,996 | 1,900 ₹2,81,200 | 1,300 ₹1,92,400 | 1,000 ₹1,48,000 Lowest |
| 5.00 | Material & Labour Plain cement concrete 1:4:8 (40 mm graded stone aggregate) type D2, as in foundations, filling and mass concrete complete all as specified and as directed. | 78 | CUBIC METRE | 6,000 ₹4,68,000 | 5,000 ₹3,90,000 | 4,800 ₹3,74,400 | 4,750 ₹3,70,500 | 2,700 ₹2,10,600 Lowest | 4,200 ₹3,27,600 |
| 6.00 | Material and labour for providing Pre-cast cement concrete block masonry with Grade 'C' solid block, exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part-I) 2005 and set in CM 1:6 complete all as specified. | 63 | CUBIC METRE | 8,000 ₹5,04,000 | 5,000 ₹3,15,000 Lowest | 6,997 ₹4,40,811 | 6,500 ₹4,09,500 | 6,450 ₹4,06,350 | 6,000 ₹3,78,000 |
| 7.00 | Material and labour for providing Pre-cast cement concrete block masonry with Grade 'C' solid block, not exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part-I) 2005 and set in CM 1:4 complete all as specified. | 80 | SQUARE METRE | 1,000 ₹80,000 | 540 ₹43,200 Lowest | 1,600 ₹1,28,000 | 1,150 ₹92,000 | 1,100 ₹88,000 | 600 ₹48,000 |
| 8.00 | M&L Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and as directed. | 885 | SQUARE METRE | 250 ₹2,21,250 | 230 ₹2,03,550 Lowest | 245 ₹2,16,825 | 280 ₹2,47,800 | 250 ₹2,21,250 | 730 ₹6,46,050 |
| 9.00 | M&L for sand or stone dust filling and sand or stone dust cushioning under floors or in foundations including watering and consolidation complete all as specified and as directed | 23 | CUBIC METRE | 2,000 ₹46,000 | 1,800 ₹41,400 | 1,237 ₹28,451 | 1,200 ₹27,600 Lowest | 1,450 ₹33,350 | 2,400 ₹55,200 |
Tender Value
₹48 L
EMD Value
₹96,000
Closing Date
31 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Bidar
Garrison Engineer (Air Force) Bidar, Military Engineer Services, Air Force Station Bidar, Bidar-585401
PROVISION OF GRAVEL FILLING AROUND 6 POLE, 4 POLE, 2 POLE STRUCTURES AND PROVISION OF CERTAIN BR WORKS IN NO 1 OFFICERS MESS AT AF STATION BIDAR
2025_MES_718194_1
GE(AF)/BID/TOKEN/14 OF 2025-2026 8165
Open Tender
Civil Works
Item Rate
270 days
Bidar
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) Bidar
₹96,000
Yes
6 Oct 2025
3 Jul 2025
7 Aug 2025
3 Jul 2025
31 Jul 2025
17 Jul 2025
3 Jul 2025 - 15 Jul 2025
Amount
Schedules of Works
Surface excavation not exc. 30 cm deep averaging 15 cm deep and getting out in hard/dense soil complete all as specified and directed
M&L Hardcore of Broken stone or boulders gauge n exc. 40 mm, deposited, spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L Hardcore of Broken stone or boulders gauge n exc. 20 mm, deposited, spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
M&L Hardcore of Broken stone or boulders gauge n exc. 10 mm, deposited, spread and levelled in layer n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.
Material & Labour Plain cement concrete 1:4:8 (40 mm graded stone aggregate) type D2, as in foundations, filling and mass concrete complete all as specified and as directed.
Material and labour for providing Pre-cast cement concrete block masonry with Grade 'C' solid block, exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part-I) 2005 and set in CM 1:6 complete all as specified.
Material and labour for providing Pre-cast cement concrete block masonry with Grade 'C' solid block, not exceeding 10 cm in width, having minimum compressive strength of 50 Kg / Sq cm as per IS 2185 (Part-I) 2005 and set in CM 1:4 complete all as specified.
M&L Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:6 surface finished even and smooth without using extra cement complete all as specified and as directed.
M&L for sand or stone dust filling and sand or stone dust cushioning under floors or in foundations including watering and consolidation complete all as specified and as directed
Material & labour for Machine pressed precast concrete interlocking paver blocks/tiles , any shape & size with grey cement and pigment confirming to IS-15658-2006 of 80 mm thickness, M-40 grade, complete all as specified and as directed.
Material & Labour 75 mm thick for plain cement concrete 1:4:8 (20 mm graded stone aggregate) type D2, as in sub base of floor and path, complete all as specified and as directed.
M&L for Plain Cement concrete 1:2:4, type B-1 (using 20mm graded stone aggregate) as in benching, coping including weathering, slightly rounded or chamfered angles and including necessary form work etc complete all as specified and as directed.
M&L for preparation of newly plastered wall surfaces and applying two coats of synthetic enamel paint over a priming coat complete all as specified and as directed.
Dismantling of Wall panelling and ceiling boards (fibre, pulp, insulation, planks, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets and frame work, any description, fixed in any position with screws, complete all as specified and as directed.
Taking down chowkats or frames exc 1.5 sqm but n.exc 4sqm each but with shutters (without taking off shutters from the frame), complete all as specified and as directed.
S&F Aluminium door shutters powder coating (minimum thickness of powder coating not less than 15 micron), aluminium section weighing not exceeding 0.55 Kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, handles 2 Nos. in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified.
Material and Labour for 18/19mm thick Plywood, grade BWP type BB fixed with screws to timber frame complete all as specified and as directed.
Material and Labour in repairs for 1 mm thick Mica laminated sheet (Make : Superlam or techno commercial equivalent) in any colour glossy finishes fixed with adhesive material for shutters of ward robes, cabinets etc all as specified and as directed.
Material and Labour for tinted glass 5 mm thick of any colours with printed in any pattern and glazing with oil putty or glazing clips etc in square or rectangular fixed with aluminium window/ ventilator shutters/foldable shutters complete all as specified and as directed.
Material and Labour for mirror glass 5 mm thick clipped or fixed to wardrobe shutters and similar work including required frame work, cutting to shape drilling holes required, complete all as specified and as directed.
Material and Labour for tinted glass 10 mm thick of any colours and glazing with oil putty or glazing clips etc in square or rectangular fixed with silicon or adhesives as in shelves, wardrobes, cupboards, complete all as specified and as directed.
Material and labour for providing, 12 mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over wooden fillets, or metal frame work and reinforced with GI wire mesh, box or any pattern, complete all as specified and as directed. Note : GI frame work includng suspenders will be measured and paid for separately) Make : Anutone / Armstrong / Aerolie / Saint Gobain Gyproc / Ramco Hilux / Diamond Ceilings / Lloyd Insulations / Knauf or any approved makes as specified here-in-after.
S & F 30 mm thick flush shutters, solid core construction, with particle board core and ply wood face panels, commercial type on both sides, complete all as specified and as directed.
S&F MS Roof trusses (framed),Vertical post, trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Square or Rectangular hollow sections) including distance pieces, cleats, screw bolt with washers and one hexagonal or square nuts etc. conforming to Fe-290 Gde-165 , complete all as specified and as directed.
Supply and Fixing Anodised aluminium frame powder coating (minimum thickness of powder coating not less than 15 micron),side hung/sliding type for doors, windows, ventilators, partitions with one or more rebates including jointing cleat and fixed with foldable channels at top and bottom etc., complete all as specified and as directed.
Supply and fixed aluminium (die cast) body door closer hydraulically regulated designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and as directed.
S&F continuous (piano) hinges, width of flap 30mm, mild steel, bright finish or electrogalvanized complete all as specified and directed.
Supply and Fixing for CP mortise door handle lock of 200mm long with lock body and 3 keys for door matte black rose finish complete all as specified and as directed. Make : Godrej or techno-commercial equivalent make specified here-in-after.
Supply and Fixing for 125mm long stainless steel butt hinges finished with brass antique of 2.5mm thick fixing with door handle fix with stainless steel screws complete all as specified and as directed.
Supply and Fixing stainless steel floor door stopper finished with brass antique of 125 mm over all length with cover plate and tongue with hard drawn steel spring fixed in floor, Complete all as specified and as directed.
Supply and Fixing for 200mm long stainless steel door handle finished with brass antique fix with brass screws complete all as specified and as directed.
S & F of magnetic ball brass catcher suitable for kitchen cabinet shutters complete all as specified and directed
S & F 75mm long extruded aluminium alloy handle fabricated type, complete all as specified and as directed.
Material and labour for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including provision of Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. Note : Armstrong / Aerolie / Saint Gobain Gyproc / Ramco Hilux / Diamond Ceilings / Lloyd Insulations / Knauf or any approved makes as specified here-in-after.
Siddique constructions (BID ID -3377654)
M/s D.Krishna Varma (BID ID -3369277)
Mr Madhusudhan Kotarki (BID ID -3370464)
AMAR CONSTRUCTION (BID ID -3370106)
M/s.Santosh Kotarki (BID ID -3362734)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .