ADDN/ALTN TO CENTRAL DOME AT HQ SWAC, EXTENSION OF RANGE BUTT WALL AT SMALL ARMS RANGE AT VSN CHILODA AND CERTAIN MINOR WORK AT VSN CHILODA UNDER GE (AF) CHILODA

Demolition of concrete (unreinfoeced) in ground floors and paving n exc 15cm thickness (below or above ground level) complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in Cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L Brickwork with Fly Ash bricks (old size) straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar 1:4 by using manufacture / washed plaster sand on fair faces of brick work or concrete surfaces, including finishing even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

S&F for fixing of 10 mm thick polycarbonate sheet roofing over dome structure with aluminium strip , framing channels, self drilling screws, weather proof silicion sealant and rubber/ gasket tape of 3-6 mmthick for water tighting structure at the joints fixed on structural steel (mild steel ) framed structure complete all as specified and directed by Engr-in-charge. Note : Sheet to be fixed at height exc 12 m and n exc 15 m from the level surface in curvature. Net area of the sheet will be measured. Wastage and scaff folding rates is included in Quated rate. Note : Payment of aluminium strip and structural steel will paid under releveant items.

M&L PCC 1:4:8 type D-2 using (40 mm graded aggregate as in foundation filling and mass concrete) complete all as specified and directed.

S&F for Roof trusses (framed), trussed,purlins, rafter,crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats, Fe 410-W (Gde-E-250) quality-A, etc complete all as specified and directed.

S & F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment, Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

S&F mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm and not exceeding 10cm long and dia of neck 11 to 15mm, complete all as specified and directed.

S&F for powder coated aluminum flat bar fixed on polycarbonate sheet as complete all as specified and directed by Engr-in-charge.

S&F for decorative type/ Customized wall paper self adhesive of fixed with glue, fixed over wall, ceiling, wooden, glass or plywood including removing of existing wall paper complete all as specified and directed. Note : Decoration of wall paper as directed bt GE. Wall paper to be fixed at height exc 12 m and n exc 15 m from level surface in curvature. Net area will be measured and wastage and scaffolding rate deemed to be included in quated rates.

M&L for preparation of new steel surface not otherwise described and applying two coats of Aluminium paint over a coat aluminium red oxide primer complete.

M&L for Brickwork with old size fly ash bricks straight or curved on plan exc 6 m mean radius built in CM 1:4 complete all as specified and directed.

M&L for Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. Fe 410 -W (Gde-E- 250) quality - A complete all as specified and directed.

S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment Fe 410 -W (Gde-E- 250) quality - A as in connecting plates, base plate, welding etc complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 10cm and n exc 15 cm long and dia of neck 16 to 20 mm complete all as specified and directed.

S&F 35mm thick Block boards, grade 1 quality, exterior grade, commercial type, fixed with screws to frame-work complete all as specified and directed.

S&F 25 mm thick pre-formed filler to be sandwitched between two layers of block boards complete all as specified and directed.

M&L for preparing new or previously untreated of wood and wood based materials, and priming with pink primer and applying two coat of synthetic enamel paint, complete all as specified and as directed by the Engr-in-Charge.

M&L for preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

M&L for Preparing wall surfaces plastered or unplastered and applying two coats of cement based paint complete all as specified and as directed.

Earth work in excavation by mechanical means (Hydraulic excavator)/ in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out theexcavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m complete all as specified and as directed.

Material and Labour for approved earth filling, spreading and levelling in layers n exc 25cm thick and well ramming including watering complete all as specified as required (Soil obtained from Surface excavation may be used.)

Surface excavtion n.exc 30 cm deep and averaging 15 cm deep soft and loose soil complete all as specified and as directed.

Material and Labour for Hardcore of broken stones of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L 100mm thick cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in flooring incl form work complete all as specified and as directed.

M&L 15-16 mm thick Glazed Vitrified Tile in jambs, pillars, window cills, cooking platform, WHB platform or in any position including 10mm thick screed bed in cement mortar (1:4) and pointing with white or coloured cement (1:2) using marble dust with admixture of pigment to match with shade of tile complete all as specified and directed.

Providing and fixing of fountain as description (a) Integral fountain (Internal Dia of fountain should be 20 feet) & frame of 1.5" dia (38mm) galvanized pipe make Asian 'B' class ISI Marked with heavy duty forged 3/8" BSP MS forged socket for nozzle connection (90 No Approx) (b) Movable brass Nozzle, adjustable brass nozzle 1/4 BSP threaded with fitment of 1/4 x 3/8 BSP brass socket (c) Control Valve made from 25mm dia of SS 304 Gd or Brass for the controlling waterflow and bypassing the system flow (Prevention of Overload) (d) HPLED light fixture with SEMIcom Components HP LED TX-1B140-001-(240-12wDC) (e) Galvanized coated, UPVC fitting set ISI make for the system, (Inputs/Outputs) (f) Driver - Input 180V-240V/ AC-Output 12W DC Controll RF LED Controller 30A DC12V with remote control 8 key for RGB light controller and changer (Colour Pattern and Mode) (g) SYNTEX make ISI PVC panel boxx with 32 AMP ISI make MCB, Pump starter, conroller and drivers for fountain operation (ON/OFF) (h)Rubicon ISI make cables 4 Core copper cable for lights 2.5 III Core copper cable for pump (j) 2HP ISI Make submersible pump set (k) Grating cover make form perforated sheet with sqaure pipe of stainless steel 304 Grade (l) Suction filter for pump set make from Stainless steel 304 Grade (m) Installation Electrocution, execution Transportation (only fountain material)

M&L for 15 mm thick rendering on fair faces of brick work or concrete surfaces of walls etc 10 mm thick im CM 1:6 and 5 mm thick in CM 1:4 incl water proofing compound as per manufacturers instruction & finished the surfaces even and smooth without using extra cement, complete all as specified and directed.

Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed.

Returning filling in, including spreading, levelling watering and well ramming in layer not exc 25 cm thick complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Providing and fixing 3-5mm thick Italia glass mosaic tiles 1ft*1ft size and chip size 20mmx20mm should be fix in floor/walls with adhesive based installation over plastered / concrete surface including preparation, grouting and finishing as per design and specifications (colour and pattern as approved by user during execution) complete all as specified and as directed.

Excavating in post holes (or similar holes ) n.exc 0.5 cum getting out ,returning filling in and raming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n.exc 50m and making good surface in hard/ disintergrated soil complete all as specified and directed by Engr in Charge.

M&L for providing cement concrete 1:3:6, type C2 (40mm graded aggregate) in foundations, filling and mass concrete as in post holes complete all as specified and directed by Engr in Charge.

S&F steel work in tubular trusses, purlins including special shaped washer etc complete using ERW or induction butt welded square or round tubes conforming to IS 1161-1979 grade St- 240 complete all as specified and directed by Engr in Charge.

S&F mild steel purpose made bolts of diameter of neck exc 12 mm but n.exc 20 mm with hexagonal or square head one end and screwed the other or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut exc 30 cm long complete all as specified and directed.

M&L for Digital heavy duty outdoor floor tiles (DuRock) 10 mm thick (square/ rectangular) area of each tile size: 600mmx600 mm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including screed bed 15 mm thick in CM (1:6) complete all as specified and directed.

Removing excavated material exc 250 M but n.exc 500M and depositing where directed at a level n.exc 1.50M above the starting point complete all as specified and directed.

Excavating in trenches not exc 1.5 metre wide and not exc 1.5 metre in depth for foundation or for shafts, walls, manholes, laying of cables, pipes etc not exc 10 Sqm on plan and getting out in any type of soil complete all as specified and directed.

All as per Item No 41 here in before but exc 1.5 m and upto 3.0m depth.

Material and Labour for forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5 m high from base complete all as specified and directed.

M&L TMT bar 10mm dia and over cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) than 0.90mm dia complete all as specified and directed.

M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spaces and binders, cut to length bent to shape required, including crancking bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia or securing with clip quality complete all as specified and directed.

M&L for reinforced cement concrete Design Mix M-25 using 20mm graded stone aggregate as in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete Design Mix M-25 using 20mm graded stone aggregate as in Column, pillar piers, Post & struts etc complete all as specified and directed.

M&L for steel form work to concrete foundation, footings, raft beam, Plinth beam in flat surface and rough finished surfaces of concrete complete all as specified and as directed.

M&L for steel formwork to sides of pillars, posts, struts, piers, columns and stanchions in square, rectangular or polygonal rough finished surfaces of concrete complete all as specfied and as directed.

M&L for steel formwork to soffits of chajjas etc for fair finished concrete surface complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base 20mm in CM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Granite 16-18 mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms over cement screed base 15mm in CM 1:6 and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

M&L for PCC 1:2:4, nominal mix, type B-0, using 12.5mm graded crushed stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified and directed.

M&L for rendering 10mm thick plaster in cement morter (1:4) on fair face of concrete brick masonary finishing the surface even and smooth using extra cement complete all as specified and directed.

M&L for providing 25mm thick precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate set in CM(1:4) louvres and jallies, including all mouldings but excluding frame complete all as specified and directed.

S&F Mild steel hooks, solid body, of length 175 mm to 250 mm complete all as specified and directed

M & L for providing Point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLSH unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and including PVC concealed conduit of adequate size but not less than 20mm in dia and 1.2mm thick with all fittings and accessories including modular surface box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan point controlled by one one way modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLSH unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly complete all as specified & directed for the following :- One light/Fan point controlled by one one/way switch.

All as per item No 57 here in before but One 3 pin 5 Amps socket outlet on same board with other switch.

All as per item No 57 here in before but One 3 pin 5 Amps socket outlet on independent board with cable of 2.5 sqmm size.

All as per item No 57 here in before but wiring with 4 sqmm multistranded copper conductor unsheathed and 4 sqmm copper conductor unsheathed cable as earth continuity conductor for one 3 pin 15 Amps socket outlet point on independent board.

Supply and fixing of Glass Hanging Lights Antique Brass Finish complete with its fittings and lights comprising of wire card, holder, bass base or hanging hok, lamp, screw of 15 watt with connecting up with three core flexible copper conductor cable of suitable size for electrical connection complete all as specified and directed.

Supply and fixing of decorative LED AC strip light 60 LED/Mtr, CCT - 3000K, IP-65, 5 mtr length (White/Warm white/multi coloured as decided and directed by Engineer in Charge)water proof with jointer and adaptor suitable for 180 V to 280 Volt complete all as specified and directed.

S&F Modular switch one way 5/6 Amp,1 module, 240 Volts complete all as specified and directed.

S&F Modular socket 2/3 pin, 6 Amps, 2 module 240 Volts complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core complete complete all as specified and directed.

S&F of Factory made board distribution in sheet steel enclosure double door glazed with 200 Amps rated bus bar, SPN, 8 ways, 240 Volts suitable for housing MCBs complete all as specified and as directed.

S&F of MCB, SPN, 240 volts, C Curve , 63 Amps 10 KA complete all as specified and as directed.

S&F of MCB, SP, 240 volts, 20-32 Amps 10 KA ,C Curve, complete all as specified and as directed.

S&F of Modular switch one way, 16 Amp,1 module, 240 Volts complete all as specified and as directed.

S&F of Modular socket 16A, 6 pin, 3 module 240 volts complete all as specified and as directed.

Please Enable Macros to View BoQ information