PETTY ELECTRICAL REPAIR INCLUDING ATTENDING OF DAY TO DAY COMPLAINTS FOR INTERNAL ELECTRIFICATION AT MIL STN KOTA

Amount

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets, light fittings etc removing materials to store for reuse or for taking credit and making good disturbed surfaces of walls, floors, etc complete all as specified and directed.

M&L for Point wiring with PVC insulated (FRLSH) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm with PVC insulated (FRLSH) unsheathed multi stranded copper conductor cable of size 1.5 Sqmm as earth continuity wire to be drawn in and including PVC casing capping not less than 20 mm width with all accessories and fittings, fixed on surface including providing PVC/wooden rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surfaces, complete all as specified and directed for the following: - One light/ceiling fan/exhaust fan/bell buzzer point controlled by one, one way switch of 5/6 Amps.

All as per item No 2.00 (here-in-before) but one 5 Pin, 5/6 amps socket outlet point on same board, controlled by one, one way 5/6 Amp switch.

All as per item No 2.00 (here-in-before) but one 5 Pin, 5/6 amps socket outlet point on independent board, controlled by one, one way 5/6 Amp switch.

All as per item No 2.00 (here-in-before) but one light point controlled by two, two way switches of 5/6 Amps.

M&L Point wiring with PVC insulated (FRLSH) unsheathed multi stranded copper conductor cable of size 2.5 Sqmm, with PVC insulated (FRLSH) unsheathed multi stranded copper conductor cable FRLSH of size 2.5 Sqmm as earth continuity wire to be drawn in and including PVC casing capping not less than 20 mm width with all accessories and fittings, fixed on surface for one socket outlet 15 amp on independent board including providing PVC/wooden rectangular block for mounting switches, sockets, fan regulators etc with 3 mm thick plastic laminated sheet cover and making good disturbed surface, complete all as specified and directed.

S&F in renewal of switch piano flush type 5/6 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified & directed.

S&F in renewal of switch piano flush type 5/6 Amps, 230 volts, single pole, Two way, ISI marked, complete all as specified & directed.

S&F in renewal of switch piano flush type 15/16 Amps, 230 volts, single pole, one way, ISI marked, complete all as specified and directed.

S&F in renewal socket outlet, 5/6 and 15/16 Amps, 230 volts, multi pin, flush type, universal, complete all as specified and directed.

S&F in renewal socket outlet, 5/6 Amps, 230 volts, multi pin, flush type, universal, ISI marked, complete all as specified and directed.

S&F in renewal switch socket combination, 5/6 Amps, 230 volt, multi pin, flush type, universal, ISI marked, complete all as specified and directed.

Supply and fixing switch socket combination, 5/6 and 15/16 Amps, 230 volt, multi pin, flush type universal, ISI marked, complete all as specified and directed.

S&F in renewal modular type switch 5/6 Amps, 230 volts, single pole, one way, 1 module, ISI marked, complete all as specified and directed.

S&F in renewal modular type switch 15/16 Amps, 230 volts, single pole, one way, ISI marked, 1 module, complete all as specified and directed.

S&F in renewal modular type socket outlet, 5/6 and 15/16 Amps, 230 volts, multi pin, universal, ISI marked, 2 module, complete all as specified and directed.

S&F in renewal modular type socket outlet, 5/6 Amps, 230 volts, multi pin, universal, 2 module, ISI marked, complete all as specified and directed.

S&F in renewal of PVC/polycarbonate lamp holder, angular/batten type with back plate, ISI marked complete all as specified & directed.

S&F in renewal of Capacitor 2.5/3.00/3.50/4.0 MFD as required depending upon the model of ceiling/Exhaust fan including plastic holder for capacitor, ISI marked complete all as specified & directed.

S&F in renewal stepped type electronic fan regulator, flush type, 230 volts AC, single pole, humming free, fixed on the existing phenolic laminated sheet, complete all as specified and directed.

S&F in renewal of ceiling rose surface type PVC/ Polycarbonate isolated body, 65x 50mm, 3 terminals, complete all as specified & directed.

S&F in renewal buzzer, Ding Dong, AC 230 volts, single pole, complete all as specified and directed.

S&F in renewal bell push piano, flush type 5/6 Amps, 230 volts AC,single pole, complete all as specified and directed.

S&F in renewal of PLS LED Lamp four pin 18W, complete all as specified and directed.

S&F in renewal of LED batten 2 feet long, 10 Watt, 230 Volts with all accessories internally pre wired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable with mounting casing box 2 Nos, complete all as specified and directed.

S&F in renewal of wall mounted 20 Watt LED Tube light fittings, integrated LED batten with aluminium housing, 230 Volts, 4 feet long with all accessories powder coated steel with internally prewired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable including LED lamp with mounting casing box 2 Nos complete all as specified and directed.

S&F in renewal of emergency LED Tube light fittings, 20 watt, integrated LED batten with aluminium housing, 230 Volts, 4 feet long, with 3 Hrs of battery backup with all accessories powder coated steel with internally prewired and including connecting up to ceiling rose with 0.5 sqmm two core copper flexible conductor cable including LED lamp with mounting casing box 2 Nos complete all as specified and directed.

Supply and fixing in renewal of round/flat shape 12 Watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F in renewal of LED bulb, 5/7 Watt, suitable for threaded lamp holder, ISI marked, complete all as specified and directed.

S&F in renewal of LED name plate/focus light not less than 5 Watt, ISI marked, complete all as specified and directed.

M & L in renewal of street/road light GI mounting bracket made out of steel tube, medium grade, 40 mm dia (or higher size to suit the opening of the fitting) 1.50 mtr long by hydraulic pressed mechine bend to require arc shape and fixed to pole with 02 Nos MS flat iron clamps of suitable size fixed with bolts, nuts and washers including drilling holes and grouting with the same for fixing bolts as required & incl duly painted with two coat of aluminum paint over a coat of aluminum red oxide primer and fixing with lights fittings on the existing old street light poles complete all as specified and directed. Note :- Cost of Necessary tools and plants such as ladders, hydra for renewal of mounting brackets, light fittings, nuts, bolts etc shall be deemed to be included in the unit rate quoted.

Supply and fixing in renewal of LED luminaire 600 mm x 600 mm, 35/36 Watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light, warm white or cool white complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed.

Supply and fixing in renewal of decorative wall mounting light fixture suitable for 9 to 12 watt LED lamp/bulb B-22 base connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

Supply and fixing in renewal of post top lantern LED type 20 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp and including caging of suitable size and gauge, GI pipe with clamp as required at site, nut bolts & fasteners etc., complete all as specified and directed.

Supply and fixing in renewal of LED security/street light fitting 45 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics with IP 65/66 protection complete all as specified and directed.

Supply and fixing in renewal of electronic drivers of LED lights suitable for 32 to 36 Watt 220 V AC complete all as specified and directed.

S&F in renewal MCB SP 240 Volts, 'B' curve, breaking capacity 10 KA of rating 6-32 Amps, complete all as specified and directed.

S&F in renewal MCB SPN 240 Volts, 'B' curve, breaking capacity 10 KA of rating 6-32 Amps, complete all as specified and directed.

S&F in renewal MCB TPN 440 Volts, 'B' curve, breaking capacity 10 KA of rating 63 Amps, complete all as specified and directed.

M&L for submain wiring power/circuit using FRLSH PVC insulated (FRLSH) unsheathed, stranded copper conductor cable, 2 Single core of size 10 Sqmm & earth continuity conductor of size 10 Sqmm, to be drawn through and including PVC conduit 25mm dia on surface of walls/ roof /floors and including taking down old unserviceable existing submain wiring and conduit complete all as specified and directed.

M&L for submain wiring power/circuit using FRLSH PVC insulated (FRLSH) unsheathed, stranded copper conductor cable, 2 Single core of size 6 Sqmm & earth continuity conductor of size 6 Sqmm, to be drawn through andincluding PVC conduit 20mm dia on surface of walls/ roof /floors and including taking down old unserviceable existing submain wiring and conduit complete all as specified and directed.

M&L for Submain wiring power/circuit using FRLSH PVC insulated (FRLSH) unsheathed, stranded copper conductor cable, 2 Single core of size 4 Sqmm & earth continuity conductor of size 4 Sqmm, to be drawn through and including PVC conduit 20mm dia on surface of walls/ roof /floors and including taking down old unserviceable existing submain wiring and conduit complete all as specified and directed.

M&L for Submain wiring power/circuit using FRLSH PVC insulated (FRLSH) unsheathed, stranded copper conductor cable, 2 Single core of size 2.5 Sqmm & earth continuity conductor of size 2.5 Sqmm, to be drawn through and including PVC conduit 20mm dia on surface of walls/ roof /floors and including taking down old unserviceable existing submain wiring and conduit complete all as specified and directed. Note for items of submain wiring: - Two run of sub main wire, one run of earth wire and one run of PVC conduit shall be measured as one unit.

S&F in renewal factory made sheet metal enclosure for distribution boards, double door, suitable for fixing MCB's, SPN 04 ways, 240 Volts, protection class IP-43, made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface, conforming to IS 13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity, complete all as specified and directed. Make :- Cat Part No Ekinox3 series of Legrand or ABB ITUSISYPO21604C001 of ABB or Easy 9 series OR techno commercially equivalent makes specified in PS.

S&F in renewal factory made sheet metal enclosure for distribution boards, double door, suitable for fixing MCB's, SPN 08 ways, 240 Volts, protection class IP-43, made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface, conforming to IS 13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity, complete all as specified and directed. Make :- Cat Part No Ekinox3 series of Legrand or ABB ITUSISYPO21604C001 of ABB or Easy 9 series OR techno commercially equivalent makes specified in PS.

S&F in renewal factory made sheet metal enclosure for distribution boards, double door, suitable for fixing MCB's, TPN 04 ways, 415 Volts, protection class IP-43, made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface, conforming to IS 13032, IS 8623, BS-5484 with tinned copper bus bar of 200 Amps capacity, complete all as specified and directed. Make :- Cat Part No Ekinox3 series of Legrand or ABB ITUSISYPO21604C001 of ABB or Easy 9 series OR techno commercially equivalent makes specified in PS. Notes for items of MCB DB - (1) The unit rate includes for cutting/chasing the stone/brick walls to accommodate enclosure flush to wall. (2) The unit rate includes for making good the disturbed surfaces including finishes to match with the adjoining surface.

S&F in renewal single pole and neutral enclosure with two pin and earth plug and socket & including 1 No MCB 20A mps capacity, complete all as specified and directed.

S&F in renewal PVC rectangular block for mounting switches, sockets, fan regulators etc with & including 3 mm thick plastic laminated sheet cover as suitable size for 2 module, complete all as specified and directed.

Ditto all as per item 48.00 (here-in-before) but as suitable size for 4 module, complete all as specified and directed.

Ditto all as per item 48.00 (here-in-before) but as suitable size for 6 module, complete all as specified and directed.

Ditto all as per item 48.00 (here-in-before) but as suitable size for 8 module complete all as specified and directed.

S&F in renewal of bus bar chamber comprising of 4 Nos aluminium strip bus bars of adequate length, air insulated and PVC sheathed capacity 200 amps rating with color coding And mounted on porcelain insulators housed in box made out of 2.00 mm thick CRCA Sheets including connection with LT cable with proper lugs complete with lock & key arrangement all as specified and as directed by Engneer-in-charge Note-Cost of PCC Work shall be included in quoted rates.

M&L for Earthing with galvanized steel earth plate electrode of size 600 mm x 600mm x 6.0 mm, buried directly in ground (earth plate not less than 2.25 Mtr below normal ground level) connected to galvanized iron earth wire of 4 dia by means of bolts, nuts, check nuts and washers of galvanized iron including 15 mm bore light grade GI tubing for protection of earth wire, MS sheet metal funnel with wire mesh, watering pipe medium grade 20 mm bore, charcoal or coke and common salt in alternative layer of 15 Cm compacted thickness all around the electrode with concrete earth pit of PCC 1:3:6 type 75 mm thick precast RCC (1:2:4) type B1 pit cover reinfored with 8 mm dia deformed bar and suitable handle made of 10 mm dia round bar and necessary excavation, earth work, in soft/loose soil and disposal of spolis to a distance not exc 50 Mtr and necessary connection and testing complete all as shown in electrical plate No. 5 and including dismantling of old u/s earthing complete all as specified and directed. Notes: - (a) Irrespective of whatever is shown in plate No 5 of SSR, earth pit shall be casted in PCC (1:3:6) type C-1 and precast cover of RCC (1:2:4) type B-1 with suitable handle. (b) Item includes the cost of GI pipe for protection of earth wire and earth wire upto 7.5 m. Any variation below or above shall be measured and paid for separately under relevant item of this Sch ‘A’.

Aditya Enterprises (BID ID -3124962)

SINGH ENTERPRISES (BID ID -3125148)

ANNAPURNA ENTERPRISES (BID ID -3126816)

M/s M R MAHANA (BID ID -3124914)

L P Singh and Co. (BID ID -3125547)

TARKESHWAR DASS CONSTRUCTION COMPANY (BID ID -3123625)

VP DEVELOPERS AND CONTRACTOR (BID ID -3110875)