REPAIR / REPLACEMENT OF CEILING, WALL PANELING, FLOORING AND ALLIED WORKS IN ZONE C, D , KALSI AND SAHIYA OF AGE (I) CHAKRATA UNDER HQ CWE DEHRADUN

M & L for Dark Shade Vitrified Ceramic coloured tiles 8-10mm thick (square/rectangular) area of each tile n exc 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including bedding layer of 15mm thick cement mortar 1:6 for lying floor finishes after roughing, hacking existing concrete surface by picking, sweeping clean and washing down with water to remove dust and rubbish off the premises complete all as specified and as directed.

All as per item No. 01 above but on vertical surfaces such as in skirting fixed over and including 10mm thick rendering in CM 1:4 backing layer complete all as specified and as directed.

M & L for coloured glazed ceramic tiles of size 450mm x 300 mmx 7 mm thick as in vertical surfaces set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles fixed over and including 10mm thick rendering in CM (1:4) for fixing wall tiles including dismantling of old wall tiles including cement mortar bedding and rubbish off the premises complete all as specified and as directed.

M & L for Non skid coloured ceramic tiles 7-8mm thick (Square/ rectangular) area of each tile exceeding 0.06 sqm but n exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15mm thick screed bed or bedding layer in CM (1:6) for lying floor finishes including dismantling of old floor tiles complete all as specified and as directed.

M& L for 18-20mm thick Green marble work (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade including dismantling of old tiles including cement mortar bedding and rubbish off the premises complete all as specified and as directed.

M& L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

S & F anodized Aluminium snap grid frame work for false ceiling of size 605 X 605 mm including necessary GI wire hangers 6 mm dia any length for securing frame work to ceiling by means of ceiling cleats, made out of GI flat 40x3mm size 60mm long and expansion hold fasters 12.5mm dia 40mm long and providing 4mm thick Non asbestos fibre cement building boards fixed or laid/inserted to aluminium framework with screws fixed in ceiling flat or sloping including dismantling of existing ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed.

S & F false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) semi perforated 12mm thick Micro Teguler edge GRG false ceiling tiles of Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main- T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of s1ze 600x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and 'L' shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws including dismantling of existing ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and directed by Engineer-in-Charge.

S & F Solid PVC Wall Lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing including dismantling of existing wall boards of any description, fixed in any position with nails complete all as specified and directed.

M& L for 5mm thick PVC Sheet Fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame as per specifiaction complete all as specified and directed.