Replacement of ACSR conductor by LT AB cable

Amount

Annexure-A (LABOUR CHARGES)

Cartage of PCC Pole 8.5 mtr long including Loading /Unloading from store centre to road site (approximate distance 10-50KM)

Cartage of STP SP-33 Pole including Loading /Unloading from store centre to road site (approximate distance 10-50KM)

Cartage of AB cable & other small material including Loading /Unloading from store centre to road site (approximate distance 10-50KM)

Head load Cartage of PCC Pole 8.5 mtr from Road side to work site upto 0-1 Km distance including loading/unloading.

Head load Cartage of STP SP-33 Pole from Road side to work site upto 0-1 Km distance including loading/unloading.

Head load Cartage of AB Cable & other small material from road side to work site upto 0-1 Km distance including loading/unloading.

Charges of Erection of P.C.C. Pole8.5 Mtr. Long (180 kg. W/L)for reducing span of LT, ABC line including digging of pits 0.6x0.9x1.5 Mtr.& with fixing of all accessories & back filling with soil & boulder earthing complete work as per RESPO specification & as per direction of Engineer in charge

Charges of Errection of Single Pole structure on SP-33 Pole after digging of pits in size 0.9*0.6*1/6 of pole length and grouting by CC Mixure of ratio 1:4:8 including fixing & fitting of all reruired accessories on poles complete in all respect as per RESPO Spn. & instruction of Engineer In Charge.

Charges of Laying, Stringing, sagging of ABC Cable3x120+1x95+1x16mm2 including fixing of Insulated,Piering Connector, Dead end clamp with I Hook, Suspension Clamp with I Hook in all complete work as per direction of Engineer-In-Charge.

Charges of Installation & Fixing of SMC three phase L.T.Distribution Box with inbuilt pannel lock, AI bus bar RYB 25x6 mm AI bus bar size including all complete work as per drawing, upcl specification and direction of Engineer-In-Charge.

Charges of Re-connection of exising cable of single phase legal service connection same as per direction of Engineer-In-Charge.

Charges of Re-connection of exising cable of three phase legal service connection same as per direction of Engineer-In-Charge.

Charges for Dismentaling of Old ACAR Conductor L.T. Line including re-rolling back its conductor, wire, clamp insulator etc. including stacking & transportation of material to the UPCL store : 3 phase 4 wire.

Charges for Dismentaling of Old ACAR Conductor L.T. Line including re-rolling back its conductor, wire, clamp insulator etc. including stacking & transportation of material to the UPCL store : 2 phase 3 wire.

Charges for Dismentaling of Old ACAR Conductor L.T. Line including re-rolling back its conductor, wire, clamp insulator etc. including stacking & transportation of material to the UPCL store : 1 phase 2 wire.

Charges of Fabrication of MS angle/Channel with cutting, drilling holes and fabrication charges as required by Engineer in charge for proper completion

charges of Erection of MS earthing rod 20x2500 mm by earth, electrod, connection with support by means of earth wire 7/10sqm with nut & bolts in all complete work as per direction of Engineer in charge

Charges of Erection of stay set 16x1800mm. pit size 0.6x0.9x1.2 Mtr. including excavation of earth all complete as per direction of Engineer in charge.

Charges of painting of Single pole structure on SP-33 poles 1 coat of primer & 2 coat of al. burzer paint as per norms & direction of Engineer in charge.

Charges of Fixing of triangular bracket on pole as per RESPO Spn. & instruction of Engineer In Charge.

Charges of cutting of rcc for erection of pole as per instruction of Engineer In Charge.

Charges of Muffing of new ST SP-33 Poles with CC 1:2:4 block and 45 cm height from ground level including cost of required material as ballast, cement, sand etc complete in all respect as per direction of work incharge.

Charges of Grouting of stay in ratio 1:4:8. (1 cemant:4 graded stone 20mm,8 course sand) including cost of cemant,sand & stone blast back filling soil bolder in pit etc. (0.6x0.6x0.3=0.108 cum each) as per RESPO specification & as per direction of Engineer in charge.

Charges of digging pit of size 0.6x0.9x1/6 of pole length as per direction of Engineer in charge.

Annexure-B (SUPPLY ITEMS)

Supply of SMC Three Phase L.T. Distribution Box with inbuilt panal lock, Al bus bar RYB 25x6mm., Al Busbar N. 40x6mm. for connection of L.T. consumer ( Sintex/RMC make or other ISO reputed company ) with Panel Lock with key) ( As per drawing attached )

Supply of Dead End Clamps with I Hook. As per drawing and UPCL Specification.

Supply of Suspension Clamps with I Hook. As per drawing and UPCL Specification.

Supply of M.S. Clamp made of M.S. flate for PCC Pole, size 35x6sqmm. duly red oxide painted with suitable size with fitted Nut & Bolts and washer for Suspension without cracks & burrs as per specification of UPCL.

Supply of M.S. Clamp made of M.S. flate for PCC Pole, size 35x6sqmm. duly red oxide painted with suitable size with fitted Nut & Bolts and washer for Dead End without cracks & burrs as per specification of UPCL.

Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 120 Sqmm TYCO/RPG/3M Make

Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 95 Sqmm to 95 Sqmm TYCO/RPG/ 3M Make

Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 120 Sqmm to 35 Sqmm TYCO/RPG/3M Make

Supply of insulated Piercing connector body molded from high quality mechanical climate and UV resistant glass reinforced polyamide, hot dipped galvanized bolts & contact teeth ABC size 95 Sqmm to 35 Sqmm TYCO/RPG/ 3M Make

Supply of Aluminium Lugs ‘O’ type size 120mm.

Supply of Aluminium Lugs ‘O’ type size 95mm.

Supply of M.S. Clamp MS Flate 35x6mm with nut bolt for fixing L.T. Distribution Box as per upcl specification

Supply of Stay clamp 35x6 mm with stay insulator duly red oxide painted with suitable size with fitted Nut & Bolts and washer without cracks & burrs as per specification of UPCL.

Supply of Nut & Bolt of all size as per upcl specification

Supply of LUG 150 Sqm as per upcl specification

Supply of LUG 400 Sqm as per upcl specification

Supply of ‘O’ type LUG as per upcl specification.

Vision Electricals