2575 PD 14 No 1

Cement OPC 43 Grade packed in HDPE bag each 50 Kg wt conforming to IS 8112 1989 Make Birla Gold or Ambuja or Ultratech or ACC or JKJ Dalmia

Stone boulder 9inch to 12inch

Coarse Aggregate 40 to 63mm

Coarse sand free from vegetation

Coarse Aggregate 20mm graded .

Coarse Aggregate 40mm graded

Mild Steel Bars of size 6 to 8 mm dia Conform to IS 432 Part 1 1982 TMT Bar Make TATA or SAIL or JSW

Water proofing compund conforming to IS 2645 2003 Make Pidilite or Dr Fixit or Fevicol

PBS Roll 20m Long Width of 0 point 9Mtr ISI Marked with Min weight of 34 Kgs per Roll

GI binding wire TATA or SAIL or JSW

Cement base paint Scowcem Make Berger or Asian or Nerolac

Painting brush 4inch ISI Marked

HDPE Sand bags khaki colour of size 30inchx15inch inside laminated interlocking stiched weight of the each bag as per TS

Anti corrosive red oxide zinc chromate primer confirming to IS 5 2004 Make Berger or Asian or Nerolac

Synthetic Paint enamelled OG confirming to IS 5 2004 Make Berger or Asian or Nerolac

Thinner Make Nerolac or Berger or Asian

SRT 2440 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts and bolts incl One coat of Red Oxide Make TATA or SAIL or JSW

SRT 1840 x 613 x 180 2 mm thick MS Sheet Hot Rolled Steel with nuts bolts incl One coat of Red Oxide Make TATA or SAIL or JSW

ISMB hot rolled MS 200 x 100 4M Make TATA or SAIL or JSW

Prefab mild steel door of size 750x1800mm double shutter outer frame made out of ISA 40x40x6mm as per TS

Mild Steel Bars of size 6 to 10 mm and above dia conforming to IS 432 Part I 1982 Make TATA or SAIL or JSW

Loop Holes 780 x 300 mm Make TATA or SAIL or JSW

Loop Holes 1000 x 300 mm Make TATA or SAIL or JSW

Loop Holes 1250 x 350 mm Make TATA or SAIL or JSW

Ventilator steel 600x450mm will be fabricated using ISA 35x35x6mm for outer frame and ISA 30x30x3mm as per TS

Wooden plank for shuttering II class wood of size 3 point 0 x0 point 3 x0 point 026 m

Wooden Scantling various size

Nails various sizes

Air terminatoin single pointed aluminium rod 12mm dia and 300mm long

Testing point terminal block made of gun metal phosphorus bronze size 75x75x25mm drilled and screwed as per TS

Aluminium strips 25x3mm

Galvanised iron strip 32x6mm

Funnel fitted with 20mm dia GI Pipe 1 point 5m long Make Jindal or Tata or Kalinga

Earthing Plate 600x600x6mm GI steel suitable for GI strip fittings drilled with two nos holes for 6 mm dia near one side

CI earth pit cover of size 300x300x6mm with angle of size 20x20x3mm thick with MS frame

Insulating PVC block 75x75x30 mm with insulating clamp nut bolt Make Presto or Polycab or Finolex

PDs Construction mtrl and other stores