Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹32,409.65Accepted-AOC | ₹32,409.65 Quoted ₹35,871.06 | 1 | Accepted-AOC 1 |
| 2 | 2₹32,409.65−₹3,461.41 (9.65%)Rejected-AOC | ₹32,409.65−₹3,461.41 (9.65%) | 2 | Rejected-AOC 2 |
| Sl No | Description | Qty | Unit | latheef L2 | BIJU KANJIRATHINGAL KURIYACHAN L1 |
|---|---|---|---|---|---|
| 1.00temporary siden protection for public pond | |||||
| 1.00 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil | 1.25 | cum | 380 ₹475 | 231.87 ₹289.84 Lowest |
| 1.00 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.12 | cum | 3,499 ₹437.38 Lowest | 8,967.54 ₹1,120.94 |
| 1.00 | 10.16.3:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Electric resistance or induction butt welded tubes | 130 | kg | 136.99 ₹17,808.7 Lowest | 158.97 ₹20,666.1 |
| 1.00 | OD214847/2025-2026:Providing and fixing precoated galvanized iron profile sheet-(size,shape, and pitch of corrugation as approved by engineer in charge ) 0.35mm(+0.05%), ,total coated thickness with zinc coating 120gms per sqm as per IS:277, in 240 mpa steel grade,5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18microns . Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 15 | per sqm | 1,010 ₹15,150 | 558.99 ₹8,384.85 Lowest |
| 1.00 | OD214870/2025-2026:Engaging of man coolie | 2 | Day | 999.99 ₹1,999.98 | 973.96 ₹1,947.92 Lowest |
Tender Value
₹36,010
Closing Date
1 Nov 2025, 6:00 pmClosed
Assistant Engineer
Office of the Assistant Executive Engineer, LIDEW Section, Kalamassery Municipality
Temparory side protection for public pond in ward no 18
2025_LSGD_814880_29
LIDEW/AEE/ET/17/2026
Open Tender
Civil Works - Roads
Item Rate
180 days
Kalamassery
Please refer Tender documents.
7 documents required · 7 mandatory
₹335
Yes
Yes
8 Aug 2026
27 Oct 2025
3 Nov 2025
27 Oct 2025
1 Nov 2025
27 Oct 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1364644.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.30 MB
BOQ_1364644.xls
BOQ • 0.23 MB
sbd29.pdf
Tender Documents • 1.73 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .