Re tender - GENERAL- RM / 2025-26 - RC 2 Phase 1 / Zone 1- One year running Contract for various PWD roads under Roads section Ambalapuzha in Alappuzha District 5 roads for a length of 27.41 km-.-General Civil Work

Amount

Appendix A Reactive Maintenance(Initial Rectification Work)

10.5.1a:Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm. Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 - For grading I Material

Appendix B: Pre-monsoon Works and traffic safety works

OD301694/2024-2025:Hire charges of hand machine for cutting wood

OD301692/2024-2025:Engaging Man mazdoor for assisting wood cutter

OD301689/2024-2025:Engaging Wood cutter for cutting trees and branches standing in dangerous condition

OD301696/2024-2025:Engaging earth movers like JCB uprooting of trees and for lifting of cut down trees andbranches for stacking in proper places and for cutting excess earth and loading other waste in Tipper lorry etc

OD301693/2024-2025:Engaging Tipper 5.5 cum capacity for the conveying the silt removed

OD301695/2024-2025: Engaging Man Mazdoor for cutting and removing the light jungle

55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.

OD301690/2024-2025:Removing the silt deposit after clearing the side drain and conveying the silt deposit and dirty materials and biological waste away from site and deposit on available land etc including all labour charges .5km conveyance etc

OD301691/2024-2025:Filling up potholes with bituminous ready mix compound (25kg bag) and compacting and ramming to get a compact surface including laying charges, transportation to the site etc complete( Rate is arrived for one bag)

8.5:Providing and fixing of direction and place identification retro-reflectorised sign with 7 years warranty manufactured as per IRC :67 made of Type IV micro prismatic grade sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 sqm, with suitable back supporting frame of MS angle 40x40x6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.

8.13:Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads on Bituminous Surface @ 250 gms per sqm area, the thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform, and free from streaks and holes.

8.35:Providing and fixing reflective road studs (Raised Pavement Marker) of ' category A' made out of ASA/HIPS/ABS moulded body with shanks and conforming to ASTM D 4280, strong enough to support a load of more than 13.635 T when tested in accordance with ASTM D 4280, reflective panel confirming to ASTM D 788, and reflectivity conforming to clause 804.4. including installation, drilling, fixing with adhesive etc. with 2 years warranty for the road stud as well as for in field performance as per clause 804.7.3 Road Markers/Road Stud with Lense Reflector :-

OD301699/2024-2025:Providing and fixing of DLP board for Running contract work with Non-retro-reflectorized Vinyl sign with 1 years warranty manufactured Vinyl Printed sheeting fixed over aluminum sheeting 2 nun thick/ aluminum composite material sheeting 4 rum thick with area not exceeding 0.9 sqm, with suitable back supporting flame of MS angle 40x40x6 and supported on GI pipe pole 5Oinm NB confirming to IS 123.9 firmly fixed to the ground by means of properly designed foundation with M 1ñ grade cement concrete min size 45 cm x 45 cm x 60 cm,60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer and as per approved drawing and clause 801 including lettering symbols etc.

OD301698/2024-2025:Removing the old existing Vinyl sticker works on the display Board of running contract and replacing with new vinyl sticker , including lettering, symbols and transporting to site etc as per approved drawing and directions of the engineer

OD301697/2024-2025:Supply , installation and commissioning of solar powered road warning Blinkers with one standard pole with two led blinker retrofit, producing avg min 50 to 60 flashes per minute 300 mm amber/red with poly carbonate housing with door assembly, including pole, panel frame, pole cap ,cable laying etc. complete

Appendix C: Protective/Preventive maintenance

12.1.B.1:Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with approved material. Ordinary Soil - Depth upto 3m - Mechanical Means

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.A.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15

12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer

12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

55.25:Lifting, conveying and fixing the newly casted RCC covering slabs of any thickness on top of drain in position including all labour charges and miscellaneous expenses etc complete

4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method

OD301688/2024-2025:Dismantling and Relaying departmental interlocking tile 80mm or 100mm or nearest size thickness, minimum strength M30 including providing a layer of 6mm aggregate for 5cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc. complete.

55.22:Supplying and laying interlocking tile 100 mm or nearest size thickness, minimum strength M 40 including providing a layer of 6 mm aggregate for 5 cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc.; complete.

12.8.B:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications PCC Grade M20 (Without formwork)

4.12:Providing, laying, spreading and compacting graded stone aggregate to Wet Mix Macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

10.5.1a:Filling Pot-holes and Patch Repairs with Bituminous concrete, 40mm. Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2 - For grading I Material

OD301687/2024-2025:Engaging labour with passenger car not less 1000cc for conducting and reporting routine inspection for 20Km for the entire length of project road at a frequency of 7 days throughout the agreement period of running contract as directed by departmental officers

55.23:Supplying and laying interlocking tile 80mm or nearest size thickness, minimum strength M30 including providing a layer of 6mm aggregate for 5cm thickness, then laying interlock cobbles in lines and levels as per the directions of the departmental officers at site inclusive of all cost & conveyance charges etc. complete.

Appendix D: Emergency Works

OD301700/2024-2025:Hire charges of hand machine for cutting wood

OD301701/2024-2025:Engaging Man mazdoor for assisting wood cutter

OD301704/2024-2025:Engaging Wood cutter for cutting trees and branches standing in dangerous condition

OD301702/2024-2025:Engaging earth movers like JCB uprooting of trees and for lifting of cut down trees andbranches for stacking in proper places

OD301703/2024-2025:Engaging Tipper 5.5 cum capacity

OD301705/2024-2025:Cutting the bituminous / concrete roads with cutting machine for a minimum depth of 75 mm without causing any damage to other utilities, including the charges for hire and conveyance of tools and plant, cost of consumables and charges for lighting, watching, ribbon fencing, caution boards, traffic diversion, and as per the direction of departmental officers etc. complete, before carrying out the demolition of bituminous / concrete road by mechanical means.

Bidder Name

MOHAMMED ISMAIL