Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.5 LAccepted-AOC | L1 | Accepted-AOC Over all rates are reasonable and lowest. | |
| 2 | L2₹35.7 L+₹2.2 L (6.51%)Rejected-Finance | L2 | Rejected-Finance Over all rates are higher than L-1. | |
| 3 | L3₹36.7 L+₹3.2 L (9.47%)Rejected-Finance C 3 SHAHDANA COLONY BAREILLY 243005 | BAREILLY | BAREILLY | UTTAR PRADESH | 243005 | L3 | Rejected-Finance Over all rates are higher than L-1. | |
| 4 | L4₹38.2 L+₹4.7 L (13.9%)Rejected-Finance | L4 | Rejected-Finance Over all rates are higher than L-1. | |
| 5 | L5₹39.7 L+₹6.2 L (18.4%)Rejected-Finance | L5 | Rejected-Finance Over all rates are higher than L-1. |
| Sl No | Description | Qty | Unit | shiv shakti contractor L4 | hardeep singh enterprises L3 | JAI SRI RAM ASSOCIATE L2 | REHAN CONSTRUCTIONS L5 | M/S S&R Construction L1 |
|---|---|---|---|---|---|---|---|---|
| 1.00 | Taking down cement plaster from brick wall including racking out joints hacking for key and scrubbing down with water complete all as specified | 650 | Sqm | 10 ₹6,500 Lowest | 10 ₹6,500 Lowest | 10 ₹6,500 Lowest | 20 ₹13,000 | 10 ₹6,500 Lowest |
| 2.00 | M&L for 15mm thick rendering on brick work or concrete surface in CM 1:6 finishing the surface fair & even complete all as spfd and directed. | 600 | Sqm | 110 ₹66,000 | 100 ₹60,000 Lowest | 130 ₹78,000 | 120 ₹72,000 | 150 ₹90,000 |
| 3.00 | M&L for rendering 5 mm thick on concrete surfaces like ceiling, chajja etc in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed | 50 | Sqm | 100 ₹5,000 Lowest | 125 ₹6,250 | 140 ₹7,000 | 120 ₹6,000 | 165 ₹8,250 |
| 4.00 | Supply only integral water proofing compound complete all as specified and directed | 15 | Kg | 30 ₹450.06 Lowest | 50 ₹750.1 | 150 ₹2,250.3 | 100 ₹1,500.2 | 55 ₹825.11 |
| 5.00 | M&L for preparation of plastered surfaces as on ceiling applying two coats oil bound distemper complete all as spfd and directed. | 50 | Sqm | 10 ₹500 Lowest | 16 ₹800 | 30 ₹1,500 | 35 ₹1,750 | 15 ₹750 |
| 6.00 | M & L for Preparing plastered or unplastered surfaces of walls and applying two coats of oil bound distempert white or tinted over & including a coat of white cement wash complete all as specified and directed | 600 | Sqm | 15 ₹9,000 Lowest | 16 ₹9,600 | 22 ₹13,200 | 35 ₹21,000 | 20 ₹12,000 |
| 7.00 | S & F Powder coated aluminium frame for doors, windows, ventilators, Partition with one or more rebates including joining cleat for fixing etc with powder coated complete all as specified and directed. | 25 | Kg | 500 ₹12,500 Lowest | 550 ₹13,750 | 500 ₹12,500 Lowest | 525 ₹13,125 | 550 ₹13,750 |
| 8.00 | S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for sliding windows or ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber /neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary fitting , filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws ,bow handles , tower bolt locking arrangement etc all complete as per architectural drawings and the directions of Engineer-in-charge. | 5 | Sqm | 5,000 ₹25,000 | 2,500 ₹12,500 Lowest | 3,200 ₹16,000 | 4,200 ₹21,000 | 3,500 ₹17,500 |
| 9.00 | M&L for brick work with old size old bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) including demolition of brick work in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. | 15 | Cum | 3,500 ₹52,500 | 2,300 ₹34,500 Lowest | 3,000 ₹45,000 | 3,500 ₹52,500 | 4,500 ₹67,500 |
| 10.00 | Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed. | 42 | Each | 50 ₹2,100 Lowest | 120 ₹5,040 | 80 ₹3,360 | 100 ₹4,200 | 100 ₹4,200 |
Tender Value
₹40 L
EMD Value
₹80,000
Closing Date
10 Jul 2025, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (West) Bareilly
GE (West) Bareilly
REPAIR/MAINT TO TOILETS AND BATHROOM AND MISC WORKS IN ZONE VI AND VII UNDER AGE B/R - I AT GE (WEST) BAREILLY.
2025_MES_714363_1
8266/C/E8
Open Tender
Civil Works
Item Rate
180 days
GE (West) Bareilly
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (West) Bareilly
₹80,000
Yes
6 Sept 2025
13 Jun 2025
12 Jul 2025
13 Jun 2025
10 Jul 2025
27 Jun 2025
Amount
Taking down cement plaster from brick wall including racking out joints hacking for key and scrubbing down with water complete all as specified
M&L for 15mm thick rendering on brick work or concrete surface in CM 1:6 finishing the surface fair & even complete all as spfd and directed.
M&L for rendering 5 mm thick on concrete surfaces like ceiling, chajja etc in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and directed
Supply only integral water proofing compound complete all as specified and directed
M&L for preparation of plastered surfaces as on ceiling applying two coats oil bound distemper complete all as spfd and directed.
M & L for Preparing plastered or unplastered surfaces of walls and applying two coats of oil bound distempert white or tinted over & including a coat of white cement wash complete all as specified and directed
S & F Powder coated aluminium frame for doors, windows, ventilators, Partition with one or more rebates including joining cleat for fixing etc with powder coated complete all as specified and directed.
S & F Powder coated aluminium (minimum thickness of powder coating 50 micron) for sliding windows or ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber /neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary fitting , filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws ,bow handles , tower bolt locking arrangement etc all complete as per architectural drawings and the directions of Engineer-in-charge.
M&L for brick work with old size old bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) including demolition of brick work in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.
Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed.
M&L providing BRAND FACTORY MADE PVC INTERNAL DOOR FRAME (PRELAM) of size 100 mm x 45 mm with a wall thickness of 5 mm (+- 0.25 mm ) made out of extruded 5 mm (+- 0.25 mm ) thick PVC sheet manufactured by an ISO 9001-2008 certified company and by joining 3 nos Heat bent PVC sheet sections. the inside section of size 90x30 mm shall be made from plain colour PVC sheet of 5 mm (+-0.25 mm ) thickness the inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from (+-0.25) thick plain PVC sheet The frame shall be mitre cut at two corners and joined with 4 nos of 150 mm long brackets of 15 mm x 15 mm MS square tube The two vertical door frames are to be reinforced with 40 mm x 20 mm MS tubes of 19 guage through out the farme The door frame shall be fixed to the wall using 8/100 mm long screw through the frame by using anchor fastners. A minimum of 4 nos screw to be provided for each vertical members and minimum 2 nos for horizontal member etc complete as per manufacturers specifications and directions of engineers-in-charg
M&L in providing 30 mm thick brand factory made internal PVC flush door shutter wood free consisting of frame made out of M S tubes of 19 guage thickness and size 20 mm x 40 mm for siles as well as top bottom and lock rail MS frame shall have a coat of metal primer of approved make and manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section 1 mm wall thickness bonded using solvent cement/ cynoacrylate adhesive with 5 mm (+-0.25 mm) thick plain/prelam PVC sheet manufactured by an ISO-9001-2008 certified company on both side of the inside panel All the four edge of the panel to be sealed with lipping of 10 mm thick and 20 mm wide PVC sheet baton( made by sticking 2 nOs PVC sheet of 5 mm ( +0.25 mm ) thickness using PVC solvent cement adhesive Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 0.20 mm thick ( 5mm x 4 mm) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos stainless steel butt hinges of size 100 mm * 25 mm * 25 mm and 50 mm long steel screws drilled suitable to pass through both the wall of the MS tube other hardwares should be fixed with 25 mm * 8mm size steel screws , 2 nos Al 100 mm bow handle and 2 nos 150mm long Al tower bolt etc complete as per direction of engineer-in-charge, manufacturers specification and drawing
S & F for in repairs Vitreous china squating pan orissa pattern size 580 x 440 mm white with integrat foot rest fixed including provision of lime concrete bedding complete all as specified and directed
S & F for in repairs Vitreous china wash hand Basin white flat back size 550 x 400 mm including bracket and cutting for and pinning in ends of brackets, fixed complete all as specified and directed
S & F in repair 15 mm dia brass chromium plated pillar tap fancy type with fly nut capstan head screwed for 15 mm dia pipe complete all as specified and directed
S&F PVC in repairs connections 15 mm Size with brass check nuts of length 450 mm complete all as specified and directed
S & F in repair PVC low level flushing cistern 10 Ltr capacity, white with all fittings and fixtures including brackets and 32 mm bore PVC flush pipe complete all as specified and directed
S&F Chomium plated shower roses 75 mm size in repair with or without swivel joints any size including fixing to steel pipe or unoin complete all as specified and directed
S & F in repair bib tap cast copper alloy with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule in 15 mm bore complete all as specified and directed
S & F in repair stop valve cast copper alloy screwed down, high pressure with crutch or butterfly handles screwed both ends for iron pipe or for unions, 15 mm dia of pipe complete all as specified and directed.
S&F in repair angle valve cock CP in repair fancy type half /full turn 15mm bore flanges approved by Engr-in-Charge
S & F Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including S & F cantiliver bracket of mild steel angle 35 x 35 x 5 mm and connecting union to pipe overall size 915 mm x 460 mm bowl size 410 mm x 330 mm x 160 mm fixed in repairs complete all as specified and directed
S&F in repairs vitreous china wash down water closet pan pedestal pattern white (excl fixing bolt flushing cistern and flush pipe ) fixed in repairs complete with seat cover white closed pattern with flat bottom and cover and mild steel chromium plated or aluminum hinging device complete all as specified and directed
S & F in repair 32 mm waste fittings/coupling of CP WHB ,Sink complete all as specified and directed.
Dismantling & breaking up drains pipes 100 / 75 mm (Saltglaged ware ,AC,PVC) Set in cement mortar complete all as specified and directed
S & F PVC (SWR) pipes double socketed in any length with rubber Ring joints fixed to walls 110 mm bore fixed complete all as specified and directed
S & F PVC (SWR) pipes double socketed in any length with rubber Ring joints fixed to walls 75 mm bore fixed complete all as specified and directed
S & F in repair PVC (SWR) bends any radius 110 mm bore fixed complete all as specified and directed
S & F in repair PVC (SWR) bends any radius 75 mm bore fixed complete all as specified and directed
S & F in repair PVC (SWR) juntion single T equal or uneqoal 110 mm bore fixed complete all as specified and directed
S & F in repair PVC (SWR) juntion single T equal or uneqoal 75mm bore fixed complete all as specified and directed
Taking up or down 15 mm steel tubing and connections complete all as specified and directed.
Taking up or down 20 mm steel tubing and connections complete all as specified and directed.
S & F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.
S & F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors complete all as specified and directed.
S & F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including Powder coated Aluminium snap grid with 22x25x1.5 mm thick Tee section and 25x25x1.5 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed.
M&L for preparation of Old plastered or unplastered surfaces of walls including brooming down or steel wire brushing scrapping down smoke roof, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coats of oil bound distemper of approved shade/tint complete all as specified and directed.
M&L for two coats of birla white putty or JK wall putty avg 3mm thick with smooth finish by sand papering to achieve smooth surfaces complete all as specified and directed.
M&L for Vitrified tiles coloured 8 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm and not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match over and incl 15 mm thick screed bed in cm 1:6 including dismantling existing tiles complete all as specified and as directed by Engineer-in-Charge.
M&L for Vitrified tiles coloured 8 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm and not exceeding 0.36 sqm, as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in CM 1:4 including dismantling existing tiles complete all as specified and as directed by Engineer-in-Charge.
M&L for Vitrified tiles coloured 8 mm thick (square/ rectangular) polished, 600x300 mm size, as in walls or cladding or in skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick rendering in CM 1:4 including dismantling existing tiles complete all as specified and as directed by Engineer-in-Charge.
M & L for non- skid ceremic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling of existing old floor or wall tiling and 15mm thick screed bed in CM 1:6 complete all as specified and directed.
S&F in repairs to CP Brass jet spray for EWC complete all as spd and directed
S&F in repairs to CP Brass Health faucet with 1 mtr tube with wall hook complete all as spd and directed
Dismantling of plaster of paris ceiling (Gypsum anhydrous) to flat surface including framework and G.I. wire mesh complete all as specified and directed.
M&L POP (Plaster of Paris) false ceiling applying 10 to 12 mm thick POP finish over ceiling surfaces with wall care putty mixed with POP powder in ratio of 1:10 (a) PGI sheet of 26 gauge in angle shape of size 25 x 25 mm all around the wall complete. (b) Main runners of 26 gauge PGI sheet in angle shape of size 35 x 25 mm at the interval of 90 cm centre to centre complete. complete including one dome not less than 1 metre dia and frame work complete all as described below : (c) Cross runners of 26 gauge PGI sheet in angle shape of size 35 x 25 mm at 40 cm center to center complete. (d) Suspender/ hanger of 26 gauge of PGI sheets in angle shape of size 25 x 25 mm fixed to soffits of roof by steel fastener complete.
M&L for 10 mm thick granite finish wall tile (black) stone for floor, steps, jambs, pillars, window cills, cooking platform and like machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over and including 15mm thick screed in CM 1:6 including dismantling of old tiles complete all as specified and directed
S & F In repair urinal partition rectangular shaped with frosted glass of size 900mm x450 m x 10mm thick complete all as specified and directed.
S & F In repair Vitreous China bowl urinal flat back, size ofangle back of size 430 x 370 x 340 mm (minimum ), with grating and union for discharge pipe and waste pipe complete all as specified and directed.
S & F In repair Continental single piece WC with PP Soft close seat cover ,hinges, Dual flush cistern fitting , P Trape 180mm with fixing accessories size 380x700x665 mm complete all as specified and directed
S & F In repair Wash basins, Vitreous China (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but fixing of supply and waste pipe complete all as specified and directed .
S & F In repair Towel Ring of fixed with and including Chromium plated brass screws and wooden / plastic cleats complete all as specified and directed
S & F In repair Soap dish, any type, fixed to plugs with chromium plated brass screws with fixing accessories complete all as specified and directed
S & F In repair Tubular towel rail, 20mm dia, D type, 60cm long between flanges size 450 mm long complete all as specified and directed
S & F In repair Toilet paper holder with flat recessed type stainless steel single toilet roll holder with stainless steel flap with fixing accessories complete all as specified and directed
S & F In repair Continental Corner glass shelf (with bracket) with fixing accessories complete all as specified and directed
S & F In repair Continental soap dispenser with glass bottle with fixing accessories complete all as specified and directed
S & F In repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long long with fixing accessories complete all as specified and directed
S & F In repair Continental shivel mirror size 630X445mm rectangular shape with fixing accessories complete all as specified and directed .
S & F In repair Toilet paper holder with flat recessed type stainless steel single toilet roll holder with stainless steel flap with fixing accessories complete all as specified and directed
S & F In repair long body Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed
S & F In repair Angle stop valve of any colour high pressure screwed for iron pipe and fixed, complete all as specified and directed
S & F In repair Continental sensor faucet for wash basin (battery operated) with fixing accessories complete all as specified and directed
S & F In repair Continental thin rim table top basin, shape - round, size - 455x455x110mm with fixing accessories complete all as specified and directed
S & F In repair Self-closing taps, cast copper alloy, chro-mium plated, screwed for iron pipe and fixed with fixing accessories complete all as specified and directed
S & F In repair Continental single lever exposed shower mixer with provision for connection to exposed shower pipe with connecting legs and wall flanges with fixing accessories complete all as specified and directed .
S & F In repair Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed connector for hand shower arrangement with connecting legs, wall flanges & wall bracket for hand shower with fixing accessories complete all as specified and directed
S & F In repair stainless steel for disabled - friendy bath room Grab bar 40 mm bore satin with fixing accessories complete all as specified and directed by Engr in Charge
Notes:- Tenderers may note that amount as given in schedule of credit will be deducted from the total amount to worked out the net contract sum at the time of Acceptance of tender.
JAI SRI RAM ASSOCIATE (BID ID -3353770)
hardeep singh enterprises (BID ID -3345580)
shiv shakti contractor (BID ID -3345452)
REHAN CONSTRUCTIONS (BID ID -3344848)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .