Loading
Loading…
New
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹32.7 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹33.3 L+₹54,733.27 (1.67%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹34.1 L+₹1.4 L (4.33%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹34.3 L+₹1.6 L (4.77%)Rejected-Finance | L4 | Rejected-Finance L4 | |
| 5 | L5₹34.7 L+₹2.0 L (6.09%)Rejected-Finance | L5 | Rejected-Finance L5 |
| Sl No | Description | Qty | Unit | SUDHEESH T P L3 | AKHILESH V L2 | Marjan V K L4 | K V VALSARAJ L5 | ANISH MATHEW L6 | jibin joseph L7 | ASHIF PK L1 | NAWAS P M A L8 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00TRUSS WORK- LADIES HOSTEL C BLOCK | |||||||||||
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 4,271.56 | kg | 146.25 ₹6,24,715.07 | 142.52 ₹6,08,782.16 | 130 ₹5,55,302.28 Lowest | 148.71 ₹6,35,223.09 | 156.4 ₹6,68,071.36 | 143 ₹6,10,832.51 | 163 ₹6,96,263.63 | 163.9 ₹7,00,108.03 |
| 1.00 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1,874.44 | kg | 117.33 ₹2,19,928.51 | 114.34 ₹2,14,323.93 Lowest | 130 ₹2,43,677.72 | 119.31 ₹2,23,639.91 | 125.48 ₹2,35,205.23 | 130 ₹2,43,677.72 | 134 ₹2,51,175.5 | 131.49 ₹2,46,470.64 |
| 1.00 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 400.01 | sqm | 110.17 ₹44,069.1 | 107.36 ₹42,945.07 | 120 ₹48,001.2 | 112.02 ₹44,809.12 | 117.81 ₹47,125.18 | 100 ₹40,001 Lowest | 125 ₹50,001.25 | 123.46 ₹49,385.23 |
| 1.00 | OD267942/2022-2023:Providing and fixing Alu-zinc traffold roofing sheets ( 0.35mm thickness) of good quality up to any pitch, including
fixing with polymer coated 'J' or 'L' hooks, bolts and nuts 8 mm dia G. I plain/ bitumen washers complete but
excluding the cost of purlins, rafters, trusses etc. The sheets shall be opaque or translucent, clear or pigmented,
textured or smooth as specified. | 762.84 | per sqm | 875.05 ₹6,67,523.14 | 852.74 ₹6,50,504.18 | 900 ₹6,86,556 | 889.76 ₹6,78,744.52 | 935.76 ₹7,13,835.16 | 980 ₹7,47,583.2 | 649 ₹4,95,083.16 Lowest | 980.65 ₹7,48,079.05 |
| 1.00 | 12.4.1:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m2 | 87.6 | metre | 708.37 ₹62,053.21 | 690.31 ₹60,471.16 | 500 ₹43,800 Lowest | 720.28 ₹63,096.53 | 757.52 ₹66,358.75 | 750 ₹65,700 | 800 ₹70,080 | 793.85 ₹69,541.26 |
| 1.01 | 12.41.1:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter | 180 | metre | 182.3 ₹32,814 | 177.65 ₹31,977 Lowest | 250 ₹45,000 | 185.36 ₹33,364.8 | 194.95 ₹35,091 | 200 ₹36,000 | 200 ₹36,000 | 204.3 ₹36,774 |
| 1.01 | OD267941/2022-2023:Supplying and fixing 150 mm dia PVC rain water gutter semi circular section including all fittings and labour charges etc. complete | 121.4 | metre | 421.35 ₹51,151.89 | 410.61 ₹49,848.05 Lowest | 500 ₹60,700 | 428.43 ₹52,011.4 | 450.59 ₹54,701.63 | 450 ₹54,630 | 485 ₹58,879 | 472.2 ₹57,325.08 |
| 1.01 | OD267943/2022-2023:UPVC Gutter rainwater dropper 150 mm | 12 | each | 230.99 ₹2,771.88 | 225.1 ₹2,701.2 | 200 ₹2,400 Lowest | 234.87 ₹2,818.44 | 247.01 ₹2,964.12 | 250 ₹3,000 | 265 ₹3,180 | 258.86 ₹3,106.32 |
| 1.01 | OD267944/2022-2023:150 mm PVC End cap | 6 | each | 457.45 ₹2,744.7 | 445.79 ₹2,674.74 | 200 ₹1,200 Lowest | 465.14 ₹2,790.84 | 489.19 ₹2,935.14 | 500 ₹3,000 | 525.5 ₹3,153 | 512.65 ₹3,075.9 |
Tender Value
₹43.8 L
EMD Value
₹50,000
Closing Date
16 Apr 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
EXECUTIVE ENGINEER
PWD BUILDINGS DIVISON, THALASSERY
GCE Truss work Providing truss work over roof of ladies hostel B block and C Block
2025_PWD_758557_1
5/2025-26
Open Tender
Civil Works - Buildings
Item Rate
365 days
Dharmasala
Please refer Tender documents.
7 documents required · 7 mandatory
₹2,760
Yes
₹50,000
Yes
9 Sept 2025
4 Apr 2025
19 Apr 2025
4 Apr 2025
16 Apr 2025
4 Apr 2025
Amount
TRUSS WORK- LADIES HOSTEL C BLOCK
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD267942/2022-2023:Providing and fixing Alu-zinc traffold roofing sheets ( 0.35mm thickness) of good quality up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts and nuts 8 mm dia G. I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.
12.4.1:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m2
12.41.1:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter
OD267941/2022-2023:Supplying and fixing 150 mm dia PVC rain water gutter semi circular section including all fittings and labour charges etc. complete
OD267943/2022-2023:UPVC Gutter rainwater dropper 150 mm
OD267944/2022-2023:150 mm PVC End cap
50.18.9.21:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Elbow
50.18.9.21.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend
26.37:Cleaning of exposed concrete surface of sticking material including loose and foreign material by sand blasting with coarse sand followed by and including cleaning with oil free air blast as per direction of Engineer in charge.
26.29.2:Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of approved make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.Bars above 12 mm diameter
26.32.1:Providing, mixing and applying SBR polymer (of approved make) modified Cement mortar in proportion of 1:4 (1 cement: 4 graded coarse sand with polymer minimum 2% by wt. of cement used) as per specifications and directions of Engineer-in-charge. Note: Measurement and payment: The pre-measurement of thickness shall be done just after the surface preparation is completed and Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding / tapping with a blunt metal instrument and/or the 75mm size cube crushing strength at the end of 28 days to be not less than 30 N/Sqmm2).12 mm average thickness.
13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
13.47.1:Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm)
ladies hostel B Block
4.2.2:Providing and laying cement concrete in retaining walls, return walls, walls ( any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts,buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc. up to floor five level, excluding the cost of centering, shuttering and finishing:1:11/2:3 (1 cement : 11/2 coarse sand :3 graded stone aggregate 20 mm nominal size)
5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers
13.16.1:6 mm cement plaster of mix:1:3 ( 1 cement : 3 fine sand)
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete
13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work
OD278650/2024-2025:Providing and fixing Alu-zinc traffold roofing sheets ( 0.35mm thickness) of good quality up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts and nuts 8 mm dia G. I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified.
12.4.1:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.80 mm thick with zinc coating not less than 275 gm/m2
12.41.1:Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter
50.18.9.21:Providing and fixing PVC moulded fittings/accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Elbow
50.18.9.21.4:Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 75 mm dia Bend
OD279013/2024-2025:Supplying and fixing 150 mm dia PVC rain water gutter semi circular section including all fittings and labour charges etc. complete
OD278651/2024-2025:UPVC Gutter rainwater dropper 150 mm
OD279020/2024-2025:150 mm PVC End cap
AKHILESH V (BID ID -2197228)
SUDHEESH T P (BID ID -2197008)
Marjan V K (BID ID -2197484)
K V VALSARAJ (BID ID -2197535)
ANISH MATHEW (BID ID -2197559)
jibin joseph (BID ID -2197573)
NAWAS P M A (BID ID -2197447)
Bidder Name
K V VALSARAJ
ANISH MATHEW
AKHILESH V
Marjan V K
SUDHEESH T P
jibin joseph
ASHIF PK
NAWAS P M A
stage.html
html • 0.06 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1232658.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .